Synthesis, characterization, and electrochemistry of cathode material Li[Li0.2Co0.13Ni0.13Mn0.54]O2 using organic chelating agents for lithium-ion batteries

Oxalic acid, tartaric acid (TA), and succinic acid (SA) are studied as chelating agents for sol–gel synthesis of Li[Li0.2Co0.13Ni0.13Mn0.54]O2 as a cathode material for lithium-ion batteries. X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy show that the materials are single-phase compounds with good crystallinities and layered α-NaFeO2 structures. The TA-material has the smallest particles (0.2–0.3 μm), with a smooth surface, and uniform distribution. Electrochemical studies indicate that the TA-material exhibits the highest initial discharge capacity (281.1 mAh g−1 at 0.1 C, 192.8 mAh g−1 at 2.0 C), the highest reversible capacity after 50 cycles (240.5 mAh g−1 at 0.1 C, 167.4 mAh g−1 at 0.5  C), and the best rate performance. The cycling stability of the SA-material is the best, with capacity retentions of 87.4% at 0.1  C and 80.1% at 0.5  C after 50 cycles. Mn4+/3+ reduction peaks appear at the first discharge process and become more evident with increasing cycle number, resulting in a spinel structure, as proved by cyclic voltammetry and differential capacity curves. Electrical impedance spectroscopy confirms that the low charge-transfer resistance of the TA-material is responsible for its superior discharge capacity and rate performance.

► We report a facile sol–gel method to synthesize Li[Li0.2Co0.13Ni0.13Mn0.54]O2. ► Oxalic, tartaric and succinic acids are chosen as chelating agents. ► TA-material has the highest reversible capacity and the best rate performance. ► The reversible capacity is as high as 240.5 mAh g−1 after 50 cycles at 0.1 C. ► The capacity fade mechanism has been preliminarily studied.