| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1288831 | Journal of Power Sources | 2011 | 12 Pages |
A self-healing glass seal has the potential to restore its mechanical properties upon being reheated to the solid oxide fuel cell (SOFC) stack operating temperature. Such a self-healing feature is desirable for achieving high seal reliability during thermal cycling. Self-healing glass is also characterized by its low mechanical stiffness and high creep rate at SOFC operating temperatures. Therefore, the geometric stability and structural integrity of the glass seal system are critical to its successful application in SOFCs. This paper describes studies of the geometric stability and structural integrity of the self-healing glass seal system and the influence of various interfacial conditions during the operating and cooling-down processes using finite element analyses. For this purpose, the test cell used in the leakage tests for compliant glass seals, conducted at Pacific Northwest National Laboratory (PNNL), was taken as the initial modeling geometry. The effect of the ceramic stopper on the geometric stability of the self-healing glass sealants was studied first. Two interfacial conditions of the ceramic stopper and glass seals, i.e., bonded (strong) or unbonded (weak), were considered. Then the influences of interfacial strengths at various interfaces, i.e., stopper/glass, stopper/PEN, as well as stopper/IC plate, on the geometric stability and reliability of glass during the operating and cooling processes were examined.
Research highlights▶ Self-healing glass alone cannot sustain its geometry in a sealing system for SOFC. ▶ Ceramic stoppers are necessary in maintaining the geometric stability of the self-healing glass. ▶ Stress level in the glass seal is very low under the operating environment of SOFCs. ▶ Cooling-down process will result in relatively high stress in glass and on the interfaces. ▶ Despite localized tensile stress compressive stresses in glass seal will maintain the structural integrity.
