Article ID Journal Published Year Pages File Type
1288941 Journal of Power Sources 2011 4 Pages PDF
Abstract

One of the greatest challenges facing microbial fuel cells (MFCs) in large scale applications is the high cost of electrode material. We demonstrate here that recycled tire crumb rubber coated with graphite paint can be used instead of fine carbon materials as the MFC anode. The tire particles showed satisfactory conductivity after 2–4 layers of coating. The specific surface area of the coated rubber was over an order of magnitude greater than similar sized graphite granules. Power production in single chamber tire-anode air-cathode MFCs reached a maximum power density of 421 mW m−2, with a coulombic efficiency (CE) of 25.1%. The control graphite granule MFC achieved higher power density (528 mW m−2) but lower CE (15.6%). The light weight of tire particle could reduce clogging and maintenance cost but posts challenges in conductive connection. The use of recycled material as the MFC anodes brings a new perspective to MFC design and application and carries significant economic and environmental benefit potentials.

Research highlights► The first study using recycled materials in microbial fuel cells. ► Recycled rubber electrodes showed comparable performance to fine carbon electrodes. ► Recycled rubber electrodes reduced the cost by orders of magnitude and generate great environmental and economic benefits.

Related Topics
Physical Sciences and Engineering Chemistry Electrochemistry
Authors
, , , ,