Solid oxide fuel cell with compositionally graded cathode functional layer deposited by pressure assisted dual-suspension spraying

In this work, the benefit of compositionally grading a cathode functional layer (CFL) for solid oxide fuel cells (SOFCs) is explored. Cells are prepared wherein either a standard cathode functional layer (SCFL) or a linearly compositionally graded cathode functional layer (CGCFL) is placed between the cell electrolyte and cathode current collecting regions. The electrochemical performance of these cells is compared with a SOFC cell containing no CFL. All cells are fabricated using a pressurized dual-suspension spraying system. Electrolytes, cathode functional layer, and cathode current collecting materials are deposited on a powder compacted anode support. SEM and EDAX area maps are taken to study the resulting micro-structures and to verify that the desired CFL profiles are produced. The EDAX area map verifies that a compositionally graded CFL and a SCFL are obtained. The cells are analyzed using impedance spectroscopy to evaluate the electrochemical performances of each cell. The open circuit voltage (OCV) and peak power densities of all three cells are 1.04 V with 80 mW cm−2, 1.12 V with 108 mW cm−2, and 1.08 V with 193 mW cm−2 at 850 °C for the SCFL cell, the cell without a CFL, and the compositionally graded CFL cell respectively. The results show that this approach is a viable means for producing SOFC functional layers with unique composition and interfacial properties.

Research highlights► Compositionally graded CFL fabricated by pressurized duel suspension spraying system. ► Addition of the compositionally graded CFL increased the area-specific ohmic resistance. ► Compositionally graded CFL overall effective at reducing the charge transfer resistance. ► Supports previously reported evidence that grading the CFL can improve SOFC performance. ► Inexpensive deposition system that can produce a viable compositionally graded CFL.