Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1290336 | Journal of Power Sources | 2010 | 5 Pages |
In this communication we report the fabrication of nanostructured (La0.85Sr0.15)0.98MnO3 (LSM)/yttria-stabilized zirconia (YSZ) composite cathodes consisting of homogeneously distributed and connected LSM and YSZ grains approximately 100 nm large. We also investigate for the first time the role of the cathode nanostructure on the performance and the durability of intermediate-temperature solid oxide fuel cells. The cathodes were fabricated using homogenous LSM/YSZ nanocomposite particles synthesized by co-precipitation, using YSZ nanoparticles of 3 nm as seed crystals. Detailed microstructural characterization by transmission electron microscopy with energy-dispersive X-ray spectroscopy revealed that many of the LSM/YSZ junctions in the cathode faced the homogeneously connected pore channels, indicating the formation of a considerable number of triple phase boundaries. The nanostructure served to reduce cathodic polarization. As a result, these anode-supported solid oxide fuel cells showed high power densities of 0.18, 0.40, 0.70 and 0.86 W cm−2 at 650, 700, 750 and 800 °C, respectively, under the cell voltage of 0.7 V. Furthermore, no significant performance degradation of the cathode was observed during operation at 700 °C for 1000 h under a constant current density of 0.2 A cm−2.