Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1291791 | Journal of Power Sources | 2016 | 8 Pages |
•1 wt% carbon nanotubes (CNTs) realized electrodes with 99 wt% active materials.•Lithium ion full cells with 1 wt% carbon nanotube electrodes showed fine performance.•Laminate cell with 50 × 50 mm2 electrodes worked with metal combs in place of foils.•Electrodes with CNTs and metal combs minimize the metal content in practical cells.
Herein, we propose lithium ion batteries (LIBs) without binder or metal foils, based on a three-dimensional carbon nanotube (CNT) current collector. Because metal foils occupy 20–30 wt% of conventional LIBs and the polymer binder has no electrical conductivity, replacing such non-capacitive materials is a valid approach for improving the energy and power density of LIBs. Adding only 1 wt% of few-wall CNTs to the active material enables flexible freestanding sheets to be fabricated by simple dispersion and filtration processes. Coin cell tests are conducted on full cells fabricated from a 99 wt% LiCoO2-1 wt% CNT cathode and 99 wt% graphite-1 wt% CNT anode. Discharge capacities of 353 and 306 mAh ggraphite−1 are obtained at charge–discharge rates of 37.2 and 372 mA ggraphite−1, respectively, with a capacity retention of 65% at the 500th cycle. The suitability of the 1 wt% CNT-based composite electrodes for practical scale devices is demonstrated with laminate cells containing 50 × 50 mm2 electrodes. Use of metal combs instead of metal foils enables charge–discharge operation of the laminate cell without considerable IR drop. Such electrodes will minimize the amount of metal and maximize the amount of active materials contained in LIBs.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slide