Analyses of fuel utilization in microfluidic fuel cell

A microfluidic fuel cell is a miniature power source, which potentially could be used in micro electronic equipments, laptop computers, mobile phones and video cameras. In recent reports, the idea of a microfluidic fuel cell without using a polymer electrolyte membrane is proposed, whereby the laminar nature of the flow in the micro-channels is used to keep the anode and cathode streams separated such that adverse electrochemical reactions do not take place at the two electrode polarities. Since such cells are restricted by their size, improvement in fuel utilization would increase the cell efficiency by several degrees. In the present study, an improvement in fuel utilization is proposed by altering the design of the microfluidic fuel cell. In particular, a sulfuric acid stream is introduced between the fuel (HCOOH) and oxidizer (O2 in H2SO4) streams to improve fuel utilization. Further improvement in fuel utilization is possible by changing the aspect ratio of the cell from 0.1 to 1. The fuel utilization of a cell with an aspect ratio of 0.1 is 14.1%, which increases to 16% when a sulfuric acid stream is introduced to prevent mixing of the fuel and oxidizer streams. The fuel utilization increases to 19% with the change in aspect ratio from 0.1 to 10, which further increases to 32% with the introduction of a sulfuric acid stream.