| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 146118 | Chemical Engineering Journal | 2015 | 11 Pages |
•ERT was used to study the gas phase behavior in an activated sludge bubble column.•Sauter mean bubble diameter was correlated to the aeration rate and rheology.•Impact of rheology on the mixing characteristics of bubble column was analyzed.•A decreasing–increasing trend was found for bubble rise velocity and size vs. MLSS.•An increasing–decreasing trend was found for mass transfer specific area vs. MLSS.
Gas phase characteristics have a significant impact on hydrodynamic conditions and oxygen mass transfer rate in activated sludge bioreactors. In the present study, the dynamic gas disengagement (DGD) technique was utilized to determine major gas phase properties (namely the number of bubble size classes, the contribution of each class to the overall gas holdup, bubble rise velocity, bubble size, and specific interfacial area for oxygen mass transfer) in an activated sludge bubble column bioreactor containing a wide range of MLSS concentration (0.712–15.86 g/L) for superficial gas velocities in the range 0.081–1.303 cm/s. Mixing performance of the activated sludge bubble column was also studied. All measurements were conducted by electrical resistance tomography (ERT) method because of its unique advantages in hydrodynamic analysis. Variations of bubble rise velocity, bubble size, specific interfacial area for oxygen mass transfer, and mixing time with MLSS concentration revealed the complex role of rheology in hydrodynamics and indicated that it is impossible to make a general conclusion about the impact of rheology without considering a wide range for its variations. A correlation was also presented for relating bubble size to the aeration rate and sludge rheology.
