Article ID Journal Published Year Pages File Type
146129 Chemical Engineering Journal 2015 11 Pages PDF
Abstract

•Mean bubble size, and size distribution in vertical gas–liquid Taylor vortex flow.•Mass transfer coefficients for vertical gas–liquid Taylor vortex flow.•Wall-driven shear produces prolate rather than oblate bubble shapes.•Bubble size and spatial distribution explains low mass transfer coefficients.•High wall area in annular geometry has significant impact on mass transfer.

Experimental measurements of the volumetric liquid mass transfer and bubble size distribution in a vertically oriented semi-batch gas–liquid Taylor–Couette vortex reactor with radius ratio η = ri/ro = 0.75 and aspect ratio Γ = h/(ro − ri) = 40 were performed, and the results are presented for axial and azimuthal Reynolds number ranges of Rea = 11.9–143 and ReΘ = 0–3.5 × 104, respectively. Based on these data, power-law correlations are presented for the dimensionless Sauter mean diameter, bubble size distribution, bubble ellipticity, and volumetric mass transfer coefficient in terms of relevant parameters including the axial and azimuthal Reynolds numbers. The interaction between wall-driven Taylor vortices and the axial passage of buoyancy-driven gas bubbles leads to significantly different dependencies of the mass transfer coefficient on important operating parameters such as inner cylinder angular velocity and axial superficial gas velocity than has been observed in horizontally oriented gas–liquid Taylor vortex reactors. In general, the volumetric mass transfer coefficients in vertical Taylor vortex reactors have a weaker dependence upon both the axial and azimuthal Reynolds numbers and are smaller in magnitude than those observed in horizontal Taylor vortex reactors or in stirred tank reactors. These findings can be explained by differences in the size and spatial distribution of gas bubbles in the vertically oriented reactor in comparison with the other systems.

Related Topics
Physical Sciences and Engineering Chemical Engineering Chemical Engineering (General)
Authors
, , , , ,