Impact of photochemically deposited monometallic Pt and bimetallic Pt–Au nanoparticles on photocatalytic dye-sensitized H2 production activity of mesoporous-assembled TiO2–SiO2 mixed oxide nanocrystal

In this work, the monometallic Pt and bimetallic Pt–Au nanoparticles-loaded mesoporous-assembled TiO2–SiO2 mixed oxide nanocrystal photocatalysts were investigated for hydrogen production from the photocatalytic Eosin Y-sensitized water splitting under visible light irradiation. A sol–gel process with the aid of a structure-directing surfactant was employed to synthesize the mesoporous-assembled TiO2–SiO2 mixed oxide with the TiO2-to-SiO2 molar ratio of 97:3 (i.e. 0.97TiO2–0.03SiO2), which was used as the base semiconductor photocatalyst. The Pt and/or Au loadings on the 0.97TiO2–0.03SiO2 mixed oxide photocatalyst were achieved via a photochemical deposition method. The synthesized photocatalysts were systematically characterized by N2 adsorption–desorption, XRD, UV–visible spectroscopy, SEM-EDX, TEM-EDX, and H2 chemisorption analyses. The photocatalytic hydrogen production activity results revealed that the optimum monometallic Pt loading for a maximum photocatalytic activity was 1.25 wt.%, which corresponded very well to its maximum Pt dispersion. The increase in the Pt loading to a higher value of 1.5 wt.% unfavorably decreased the photocatalytic activity; however, the dilution of Pt by Au to attain the bimetallic 0.75 wt.% Pt–0.75 wt.% Au loading (with high total metal loading of 1.5 wt.%) was found to preserve the photocatalytic activity at an acceptably high level.

► Mesoporous-assembled 0.97TiO2–0.03SiO2 mixed oxide nanocrystal was synthesized. ► Monometallic Pt and bimetallic Pt–Au nanoparticles were loaded on the mixed oxide. ► Metal loadings were performed by photochemical deposition method. ► 1.25 wt.% Pt provided maximum photocatalytic sensitized H2 production activity. ► 0.75 wt.% Pt–0.75 wt.% Au maintained photocatalytic activity at high total metal loading.