Article ID Journal Published Year Pages File Type
149882 Chemical Engineering Journal 2012 7 Pages PDF
Abstract

This work examined the simultaneous saccharification and fermentation (SSF) process for the biological conversion of pulp & paper sludge (PPS) and monosodium glutamate waste liquor (MGWL) into ethanol using Saccharomyces cerevisiae CICC 1001 in batch condition. At the SSF conditions of sterilization, pH 6.0, 6% TS (total solid), and adding nutrient solution, the highest ethanol yield of 42.5 g L−1 was obtained at the enzyme loading of 40 A.U. (activity unit) g−1 VSfed (volatile solid); only if the pH value was changed to 4.5, the ethanol yield reduced by 47%; only if the TS concentration was changed to 3%, the ethanol yield decreased by 11%; only if the substrates were not sterilized, 5% decrease occurred to the ethanol production; only if no nutrient solution was added to the reactor, 97% reduction of ethanol yield happened; the extent of influence of the impact factors ranked in the order of nutrient solution > pH > TS concentration > sterilization. The Fourier Transform Infrared (FTIR) spectra of substrates after SSF further verified the results of process performances. Therefore, this SSF of PPS and MGWL reduced the residue streams and land-filling costs while benefiting in ethanol production.

► SSF for the biological conversion of PPS and MGWL to ethanol was efficient without pretreatment. ► The maximum concentrations of reducing sugar and ethanol were 57.3 g L−1 and 42.5 g L−1, respectively. ► Influence extent of factors ranked in the order of nutrients > pH value> TS concentration > sterilization. ► SSF reduced residue streams and land-filling costs while benefiting in ethanol production.

Related Topics
Physical Sciences and Engineering Chemical Engineering Chemical Engineering (General)
Authors
, , ,