Article ID Journal Published Year Pages File Type
150190 Chemical Engineering Journal 2012 5 Pages PDF
Abstract

Deposition of ammonium sulfates over catalysts is often observed during selective catalytic reduction (SCR) of NOX by NH3 in the presence of SO2 and H2O, especially at temperatures lower than 350 °C, which results in catalyst deactivation and equipment erosion. Activated coke was reported to be a support effective in reducing accumulation of ammonium sulfates on the catalyst surface. However, detailed information on stability of ammonium sulfates and the properties of coke affecting the stability have not been explored. This work studies decomposition behavior of NH4HSO4 deposited on different cokes in a TG-MS system. It shows that NH4HSO4 on coke decomposes in two steps: formation of NH3 and H2SO4 starting at about 170 °C and reduction of H2SO4 by coke to form SO2 at higher temperatures, regardless of the presence of NO. The decreased NH4HSO4 poisoning is attributed to reduction of H2SO4 because it frees the pores of coke. The BET surface area and pore volume of coke do not affect the reduction behavior of H2SO4 if only they are high enough; the oxygen and nitrogen containing functional groups in coke promote the reduction of H2SO4; the minerals in coke may interact with H2SO4 to form stable sulfates; V2O5 on coke and NO in the gas elevate the reduction temperature of H2SO4.

► Extends understanding of SO2 poisoning, from NH4HSO4 accumulation to that of H2SO4. ► Reduction of H2SO4 is responsible for the catalyst's resistance to SO2 poisoning. ► Pore properties of activated coke do not affect reduction behavior of H2SO4. ► The O and N containing functional groups in coke benefit the reduction of H2SO4. ► V2O5 loaded on coke and NO in the gas both inhibit reduction of H2SO4 to SO2.

Related Topics
Physical Sciences and Engineering Chemical Engineering Chemical Engineering (General)
Authors
, , ,