| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 150209 | Chemical Engineering Journal | 2012 | 11 Pages |
Polypyrrole-polyaniline (PPy-PANI) nanofibers as adsorbent of Cr(VI) were prepared without template via coupling of propagating PPy+ and PANI+ free radicals by simultaneous polymerization of Py and ANI monomers in presence of FeCl3 oxidant. Inclusion of both polymeric moieties PPy and PANI in the fibers was confirmed by the Attenuated Total Reflectance Fourier transform infrared spectroscopy (ATR-FTIR). Entanglement and nanostructure of the PPy-PANI fibers were confirmed by field-emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy (HR-TEM) respectively. Adsorption experiments were carried out in batch sorption mode to investigate the effect of pH, dose of adsorbent, contact time, concentration of Cr(VI) and temperature. The adsorption of Cr(VI) on the nanofibers surface was highly pH dependent and the kinetics of the adsorption followed the Pseudo-second-order model. The adsorption isotherm data fitted well to the Langmuir isothermal model. Thermodynamic parameters for the adsorption system were calculated and suggested that the adsorption process is spontaneous, endothermic and marked with an increase in randomness at the solid–liquid interface. The maximum adsorption capacity of the PPy-PANI nanofibers for Cr(VI) was 227 mg/g. Selective adsorption of Cr(VI) from aqueous solution was achieved in the presence of other co-existing ions. The nanofibers retained the original sorption capacity in the first two adsorption–desorption cycles of operation. The Cr(VI) uptake was mainly governed by a physico-chemical process, which included ion-exchange followed by reduction of Cr(VI) by electron rich polymer nanofibers to form Cr(III).
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slideHighlights► For the first time PPy-PANI nanofibers were synthesized without template method as a promising adsorbent for Cr(VI) removal. ► The PPy-PANI nanofibers exhibit high adsorption capacity (227 mg/g) for Cr(VI) as well as rapid sorption kinetics. ► Ion exchange and reduction has been identified as the leading mechanism for Cr(VI) removal. ► In adsorption-desorption cycles the nanofibers show no loss of capacity upto two cycles.
