Article ID Journal Published Year Pages File Type
153893 Chemical Engineering Journal 2007 8 Pages PDF
Abstract

Electrical resistance tomography (ERT) is used to measure void fraction wave characteristics and to identify flow pattern in a bubble column reactor (0.24 m diameter, 2.75 m height). The effects of column pressure and superficial gas velocities for different sparger geometry and for different flow pattern have been investigated. The ERT sensor can distinguish the void fraction disturbances in different flow regimes with a good clarity. The holdup derived from ERT is in good agreement with the hold-up values measured by pressure transmitters. Different flow regimes have been identified based on void fraction properties and wall pressure fluctuations. The spectral analysis of ERT measurements yields quantitative information, such as a characteristic time and a characteristic frequency of void fraction waves, which are closely related to flow structure in the prevailing regime. The experimental observations are compared with the literature.

Related Topics
Physical Sciences and Engineering Chemical Engineering Chemical Engineering (General)
Authors
, , ,