Computer-aided measurement plan for an impeller on a coordinate measurement machine with a rotating and tilting probe

This paper presents a computer-aided measurement plan (CAMP) for an impeller on a coordinate measurement machine (CMM) with a rotating/tilting probe. The blade surfaces of a machined impeller were measured exactly to secure the machining tolerance and surface finish of the impeller. CMM with a rotating and tilting probe is commonly used for this measurement. However, it is not easy to evaluate all the points on the impeller surfaces due to the time-consuming nature of the CMM measurement. In addition, many points cannot be easily accessed by the CMM probe due to the interference between the probe and the impeller blades. Furthermore, the inherent complexity of the existing teaching operation of a probe using a joystick suggests the necessity of developing a new method for the measurement planning of an impeller. Thus, this paper proposes a CAMP for effectively gauging the inspection points based on the ruled line information of the impeller blade surfaces. The proposed plan partitions the surfaces into several measurement regions based on the ruled lines of a blade surface and the approach vectors of the probe. Finally, a case example for an impeller is presented to demonstrate the effectiveness of the proposed strategy.