Cyanobacteria passage through drinking water filters during perturbation episodes as a function of cell morphology, coagulant and initial filter loading rate

Eight pilot-scale in-line filtration trials were performed to evaluate the passage of cyanobacterial cells through drinking water filters after sudden increases in hydraulic loading rates. Trials were performed at 30 °C using two coagulant combinations (aluminum sulfate and cationic polymer or ferric chloride and cationic polymer), two initial filter loading rates (7 or 10 m/h) and two species of morphologically different cyanobacteria (Microcystis aeruginosa or Anabaena flos aquae). The filter was perturbed by instantaneously increasing the hydraulic loading rate by 50%. Filter influent and effluent water qualities were characterized by measuring turbidity, particles and chlorophyll a. The observed post-perturbation filter effluent chlorophyll a peaks were 1.6–48 times greater than the pre-perturbation averages. Chlorophyll a peaks were larger for M. aeruginosa than for A. flos aquae. Chlorophyll a peaks were also larger for the higher (10 m/h) than for the lower (7 m/h) initial filter loading rate. The post-perturbation effluent turbidity peaks were 1.4–7.2 times greater than the pre-perturbation averages. The post-perturbation effluent particle peaks were 6.5–25 times greater than the pre-perturbation averages. These results indicate that particles were a more sensitive indicator of cyanobacterial passage than turbidity.