Prediction of cutting temperature in orthogonal machining of AISI 316L using artificial neural network

•Exp. (experimental) and num. (numerical) cutting forces were obtained by the exp. studies and FEM analysis.•The best convergence between exp. and num. cutting forces was provided.•Num. cutting temperatures were predicted by ANN within very low error interval.•Exp. cutting temperatures were obtained using exp. cutting forces.•Exp. temperature results were quite satisfactory.

In this study, an approach based on artificial neural network (ANN) was proposed to predict the experimental cutting temperatures generated in orthogonal turning of AISI 316L stainless steel. Experimental and numerical analyses of the cutting forces were carried out to numerically obtain the cutting temperature. For this purpose, cutting tests were conducted using coated (TiCN + Al2O3 + TiN and Al2O3) and uncoated cemented carbide inserts. The Deform-2D programme was used for numerical modelling and the Johnson–Cook (J–C) material model was used. The numerical cutting forces for the coated and uncoated tools were compared with the experimental results. On the other hand, the cutting temperature value for each cutting tool was numerically obtained. The artificial neural network model was used to predict numerical cutting temperatures by means of the numerical cutting forces. The best results in predicting the cutting temperature were obtained using the network architecture with a hidden layer which has seven neurons and LM learning algorithm. Finally, the experimental cutting temperatures were predicted by entering the experimental cutting forces into a formula obtained from the artificial neural networks. Statistical results (R2, RMSE, MEP) were quite satisfactory. This demonstrates that the established ANN model is a powerful one for predicting the experimental cutting temperatures.

Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slide