Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
4971716 | Microelectronics Reliability | 2016 | 7 Pages |
Abstract
With the increasing demand to miniaturize electrical connectors and maintaining its high reliability, micro-rectangular electrical connectors are now widely used. Fretting is generally recognized as an essential failure mechanism for an electrical contact. Considerable work has been carried out to understand fretting of connectors and contact metals, by experiments and simulation methods based on a simplified “hemispheric-flat” model. It is difficult to simulate the contact interfaces between a twist pin and a socket for a micro-rectangular electrical connector. Hence, we develop a 3-D finite contact model. In the present investigation, before the fretting process caused by vibration, an additional insertion step was conducted, in order to obtain the initial state of the contact pair at mated contact surfaces when fretting occurs. We validate consistent behavior for the strand component of the twist pin during the insertion and fretting processes in the simulation. A slight stress release was observed during insertion when the bumped part of twist pin was completely inserted into the socket. The performance of the twist pin, including displacement, contact force, contact area and stress state, during the fretting process was periodically changing due to the vibration of the socket.
Related Topics
Physical Sciences and Engineering
Computer Science
Hardware and Architecture
Authors
Bo Huang, Xunbo Li, Zhi Zeng, Nanbo Chen,