Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
547646 | Microelectronics Journal | 2012 | 7 Pages |
Growing test data volume and excessive power dissipation are two major issues in testing of very large scale integrated (VLSI) circuits. Most previous low power techniques cannot work well with test-data compression schemes. Even if some low power methods can be applied in a test compression environment, they cannot reduce shift power and capture power simultaneously. This paper presents a new low shift-in power scan testing scheme in linear decompressor-based test compression environment. By dividing the test cubes into two kinds of blocks: non-transitional (low toggles) and transitional (with toggles) and feeding scan chains with these blocks through a novel DFT architecture, this approach can effectively reduce the quantity of transitions while scanning-in a test pattern. A low capture and shift-out power X-filling method compatible with the scan testing scheme is also proposed. The X-filling method assigns an interdependent X-bits set at each run and achieves significant power reduction. Interestingly, in the comprehensive strategy, capture power reduction agrees with shift-out power reduction to a certain extent. Experimental results on the larger ISCAS'89 and ITC'99 benchmark circuits show that the holistic strategy can reduce test power in shift cycles and capture cycles significantly under the constraint of certain compression ratio.