A review of board level solder joints for mobile applications

The reliability of electronics under drop-shock conditions has attracted significant interest in recent years due to the widespread use of mobile electronic products. This review focuses on the drop-impact reliability of lead-free solder joints that interconnect the integrated circuit (IC) component to the printed circuit board (PCB). Major topics covered are the physics of failure in drop-impact; the use of board level and component level test methods to evaluate drop performance; micro-damage mechanisms; failure models for life prediction under drop-impact; modelling and simulation techniques; and dynamic stress–strain properties of solder joint materials. Differential bending between the PCB and the IC component is the dominant failure driver for solder joints in portable electronics subjected to drop-impact. Board level drop-shock tests correlate well with board level high speed cyclic bending tests but not with component level ball impact shear tests. Fatigue is the micro-damage mechanism responsible for the failure of solder joints in the drop-shock of PCB assemblies and the fatigue strength of solder joints depends strongly on the strain rate, test temperature, and the sequence of loading. Finally, tin-rich lead-free solders exhibit significantly higher strain rate sensitivity than eutectic SnPb solder.