Effects of fluid motion and mixing on particle agglomeration and coating during precipitation Fulltext Access 12 Pages 2005
Numerical simulation of turbulent solid–liquid two-phase flow and orientation of slender particles in a stirred tank Fulltext Access 12 Pages 2005
Application of electrical capacitance tomography to the fluidized bed drying of pharmaceutical granule Fulltext Access 12 Pages 2005
Numerical simulation of cohesive particle motion in vibrated fluidized bed Fulltext Access 12 Pages 2005
Feasibility study of a reverse flow catalytic membrane reactor with porous membranes for the production of syngas Fulltext Access 12 Pages 2005
Studies on simultaneous energy and water minimisation—Part I: Systems with no water re-use Fulltext Access 12 Pages 2005
Local hydrodynamics of gas–liquid-nanoparticles three-phase fluidization Fulltext Access 12 Pages 2005
Determination of non-spherical particle size distribution from chord length measurements. Part 2: Experimental validation Fulltext Access 12 Pages 2005
Self- and mutual diffusion coefficient equation for pure fluids, liquid mixtures and polymeric solutions Fulltext Access 12 Pages 2005
Clogging of fibrous filters by liquid aerosol particles: Experimental and phenomenological modelling study Fulltext Access 12 Pages 2005
Modeling of heat and mass transfer coupling with gas–solid reaction in a sorption heat pump cooled by a two-phase closed thermosyphon Fulltext Access 12 Pages 2005
A model for solids transport in flighted rotary dryers based on physical considerations Fulltext Access 12 Pages 2005
Measurement and prediction of gas hydrate and hydrated salt equilibria in aqueous ethylene glycol and electrolyte solutions Fulltext Access 12 Pages 2005
Modeling, simulation and control of a methanol synthesis fixed-bed reactor Fulltext Access 12 Pages 2005
Photocatalytic intrinsic reaction kinetics. II: Effects of oxygen concentration on the kinetics of the photocatalytic degradation of dichloroacetic acid Fulltext Access 12 Pages 2005
Stirring of a liquid in a stirred tank with an eccentrically located impeller Fulltext Access 12 Pages 2005
Modelling two-sided electrofiltration of quartz suspensions: Importance of electrochemical reactions Fulltext Access 12 Pages 2005
Toward a unified framework for the derivation of breakage functions based on the statistical theory of turbulence Fulltext Access 12 Pages 2005
Cementing the foundations of thermodynamics: Comparison of system-based and surroundings-based definitions of work and heat Fulltext Access 13 Pages 2005
Excess enthalpies of binary mixtures with endothermic-exothermic changes in mixing processes: empirical correlations Fulltext Access 13 Pages 2005
Ion pair formation in copper sulfate aqueous solutions at high temperatures Fulltext Access 13 Pages 2005
Thermodynamics of binary mixtures of N-methyl-2-pyrrolidinone and ketone. Experimental results and modelling of the (solid + liquid) equilibrium and the (vapour + liquid) equilibrium. The modified UNIFAC (Do) model characterization Fulltext Access 13 Pages 2005
Deuterium isotope differences in 2-propanone, (CH3)2CO/(CD3)2CO: a high-pressure sound-speed, density, and heat capacities study Fulltext Access 13 Pages 2005
Molecular characterization of microbial populations in a low-grade copper ore bioleaching test heap Fulltext Access 13 Pages 2005
Vaporization, fusion and sublimation enthalpies of the dicarboxylic acids from C4 to C14 and C16 Fulltext Access 13 Pages 2005
Development and implementation of a new flowsheet for the flotation of a low grade nickel ore Fulltext Access 13 Pages 2005
Continuous biosorption of copper and lead in single and binary systems using Sphaerotilus natans cells confined by a membrane: experimental validation of dynamic models Fulltext Access 13 Pages 2005
The effect of cyanide and lead ions on the cementation rate, stoichiometry and morphology of silver in cementation from cyanide solutions with zinc powder Fulltext Access 13 Pages 2005
Equilibria of extraction of chromium(III) from alkaline solutions with trioctylmethylammonium chloride (Aliquat 336) Fulltext Access 13 Pages 2005
Comparative study of iron(III) separation from zinc sulphate-sulphuric acid solutions using organophosphorus extractants, OPAP and D2EHPA Fulltext Access 13 Pages 2005
Mechanistic prediction of ash deposition in a pilot-scale test facility Fulltext Access 13 Pages 2005
Comparison of two IT DIR-SOFC models: Impact of variable thermodynamic, physical, and flow properties. Steady-state and dynamic analysis Fulltext Access 13 Pages 2005
Bubble size and mass transfer characteristics of sparged downwards two-phase flow Fulltext Access 13 Pages 2005
Physico-mechanical behavior of self-cementing class C fly ash-clay mixtures Fulltext Access 13 Pages 2005
Physico-chemical characteristics of European pulverized coal combustion fly ashes Fulltext Access 13 Pages 2005
Characteristics of coal combustion products (CCP's) from Kentucky power plants, with emphasis on mercury content Fulltext Access 13 Pages 2005
Chaotic forecasting of time series of heat-transfer coefficient for an evaporator with a two-phase flow Fulltext Access 13 Pages 2005
Multi-scale segmentation image analysis for the in-process monitoring of particle shape with batch crystallisers Fulltext Access 13 Pages 2005
Numerical simulation of gas bubbles behaviour using a three-dimensional volume of fluid method Fulltext Access 13 Pages 2005
A study on sulphidation and regeneration of Z-Sorb III sorbent for H2S removal from simulated ELCOGAS IGCC syngas Fulltext Access 13 Pages 2005
High temperature calorimetric study of liquid (gallium-gadolinium-germanium) alloys Fulltext Access 13 Pages 2005
Modeling simultaneous biological clogging and physical plugging in trickle-bed bioreactors for wastewater treatment Fulltext Access 13 Pages 2005
Simulation of imbalance reduction between two reactors in an ethylene dichloride cracker Fulltext Access 13 Pages 2005
Conceptual design of a reactive distillation process for ultra-low sulfur diesel production Fulltext Access 13 Pages 2005
SCR of NO with C3H6 in the presence of excess O2 over Cu/Ag/CeO2-ZrO2 catalyst Fulltext Access 13 Pages 2005
Flow characterization of fine powders using material characteristic parameters Fulltext Access 13 Pages 2005
Real-time image reconstruction for various flow regimes using an optical tomography sensor in a gravity flow conveyor Fulltext Access 13 Pages 2005
Using intellectual property data to analyse China's growing technological capabilities Fulltext Access 13 Pages 2005
Modeling the mixing of a gas–liquid spray jet injected in a gas–solid fluidized bed: The effect of the draft tube Fulltext Access 13 Pages 2005
Part III: Dynamic evolution of the particle size distribution in batch and continuous particulate processes: A Galerkin on finite elements approach Fulltext Access 13 Pages 2005
Energy dissipation and macro instabilities in a stirred square tank investigated using an LE PIV approach and LDA measurements Fulltext Access 13 Pages 2005
An improved dynamic combined model for evaluating the mass transfer performances in extraction columns Fulltext Access 13 Pages 2005
New developments for modelling and simulation of activated anionic polymerization of lauryllactam Fulltext Access 13 Pages 2005
The influence of natural convection on the temporal development of the temperature and concentration fields for Sal’nikov's reaction, P→A→BP→A→B, occurring batchwise in the gas phase in a closed vessel Fulltext Access 13 Pages 2005
Kinetic model of wet oxidation of phenol at basic pH using a copper catalyst Fulltext Access 13 Pages 2005
Intermittency and fine structure of velocity fluctuations arising in flow-pattern transitions in stirred tanks Fulltext Access 13 Pages 2005
Pt surface kinetics for a PrOx reactor for fuel cell feedstream processing Fulltext Access 13 Pages 2005
Effects of viscosity on coalescence of a bubble upon impact with a free surface Fulltext Access 13 Pages 2005
The capture and release of biomass using a high voidage fibrous filter (marked revision) Fulltext Access 13 Pages 2005
Using in-line static mixers to intensify gas–liquid mass transfer processes Fulltext Access 13 Pages 2005
Hydrodynamics of three-phase fluidized bed systems examined by statistical, fractal, chaos and wavelet analysis methods Fulltext Access 13 Pages 2005
Experimental investigation on flow structures and mixing mechanisms of a gas-solid burner jet Fulltext Access 13 Pages 2005
Numerical identification of parameters for a flocculated suspension from concentration measurements during batch centrifugation Fulltext Access 13 Pages 2005
Effect of internals and sparger design on mixing behavior in sectionalized bubble column Fulltext Access 13 Pages 2005
Part II: Dynamic evolution of the particle size distribution in particulate processes undergoing simultaneous particle nucleation, growth and aggregation Fulltext Access 13 Pages 2005
A diffusion model for particle mixing in a packed bed of burning solids Fulltext Access 13 Pages 2005
Numerical computation for clustering of carbon particles with various sizes under both natural and magnetizing convections Fulltext Access 13 Pages 2005
Equilibrium studies of phenylalanine and tyrosine on ion-exchange resins Fulltext Access 13 Pages 2005
Thermally safe operation of liquid–liquid semibatch reactors Part II: Single diffusion controlled reactions with arbitrary reaction order Fulltext Access 13 Pages 2005
Uncertainties in the simulation of catalytic distillation process: A systematic grid refinement study Fulltext Access 13 Pages 2005
The development of high performance P84 co-polyimide hollow fibers for pervaporation dehydration of isopropanol Fulltext Access 13 Pages 2005
Appraisal of three-dimensional numerical simulation for sub-micron particle deposition in a micro-porous ceramic filter Fulltext Access 13 Pages 2005
Experimental and theoretical study on the agglomeration arising from fluidization of cohesive particles—effects of mechanical vibration Fulltext Access 13 Pages 2005
Emulsion processing—from single-drop deformation to design of complex processes and products Fulltext Access 13 Pages 2005