Effects of two-phase transport in the cathode gas diffusion layer on the performance of a PEMFC Fulltext Access 9 Pages 2006
Preparation and characterization of sulfonated PEEK-WC membranes for fuel cell applications: A comparison between polymeric and composite membranes Fulltext Access 9 Pages 2006
A fundamental study of chromium deposition on solid oxide fuel cell cathode materials Fulltext Access 9 Pages 2006
Mass/electron co-transports in an air-breathing cathode of a PEM fuel cell Fulltext Access 9 Pages 2006
Characteristics of droplet and film water motion in the flow channels of polymer electrolyte membrane fuel cells Fulltext Access 9 Pages 2006
Crosslinkable fumed silica-based nanocomposite electrolytes for rechargeable lithium batteries Fulltext Access 9 Pages 2006
Characteristics of hydrogen produced by partial oxidation and auto-thermal reforming in a small methanol reformer Fulltext Access 9 Pages 2006
Investigation of the characteristics of a compact steam reformer integrated with a water-gas shift reactor Fulltext Access 9 Pages 2006
AC impedance diagnosis of a 500 W PEM fuel cell stack: Part II: Individual cell impedance Fulltext Access 9 Pages 2006
AC impedance diagnosis of a 500 W PEM fuel cell stack : Part I: Stack impedance Fulltext Access 9 Pages 2006
Experimental studies on optimal operating conditions for different flow field designs of PEM fuel cells Fulltext Access 9 Pages 2006
A reforming system for co-generation of hydrogen and mechanical work from methanol Fulltext Access 9 Pages 2006
On-board removal of CO and other impurities in hydrogen for PEM fuel cell applications Fulltext Access 9 Pages 2006
Direct formic acid fuel cell portable power system for the operation of a laptop computer Fulltext Access 9 Pages 2006
Characterization of the operational parameters of a H2/air micro PEMFC with different flow fields by impedance spectroscopy Fulltext Access 9 Pages 2006
Optimization of key parameters in the proton exchange membrane fuel cell Fulltext Access 9 Pages 2006
Electrocatalysis of oxidation of hydrogen on platinum ordered intermetallic phases: Kinetic and mechanistic studies Fulltext Access 9 Pages 2006
Effects of annealing treatment and pH on preparation of citrate-stabilized PtRu/C catalyst Fulltext Access 9 Pages 2006
Development of alkaline direct methanol fuel cells based on crosslinked PVA polymer membranes Fulltext Access 9 Pages 2006
Production of lime, hydrogen, and methanol by the thermo-neutral combined calcination of limestone with partial oxidation of natural gas or coal Fulltext Access 9 Pages 2006
Reducing CO2 emissions of internally heat-integrated distillation columns for separation of close boiling mixtures Fulltext Access 9 Pages 2006
Recycling of wood waste as sustainable industrial resources—Design of energy saving wood-based board for floor heating systems Fulltext Access 9 Pages 2006
An assessment of the potential benefits from integrated electricity capacity planning in the northern Middle East region Fulltext Access 9 Pages 2006
A trigonometric grey prediction approach to forecasting electricity demand Fulltext Access 9 Pages 2006
Combined catalytic partial oxidation and CO2 reforming of methane over ZrO2-modified Ni/SiO2 catalysts using fluidized-bed reactor Fulltext Access 9 Pages 2006
Assessment of optimum tip speed ratio in wind turbines using artificial neural networks Fulltext Access 9 Pages 2006
Barriers to and driving forces for energy efficiency in the non-energy intensive manufacturing industry in Sweden Fulltext Access 9 Pages 2006
Efficiency enhancement in gasoline reforming through the recirculation of reformate Fulltext Access 9 Pages 2006
Performance comparison of autothermal reforming for liquid hydrocarbons, gasoline and diesel for fuel cell applications Fulltext Access 9 Pages 2006
Ethanol electro-oxidation on carbon-supported Pt, PtRu and Pt3Sn catalysts: A quantitative DEMS study Fulltext Access 9 Pages 2006
Ionic conductivities of solid polymer electrolyte/salt systems: Group-contribution method Fulltext Access 9 Pages 2006
Heat resistant alloys as interconnect materials of reduced temperature SOFCs Fulltext Access 9 Pages 2006
Effect of the catalytic ink preparation method on the performance of high temperature polymer electrolyte membrane fuel cells Fulltext Access 9 Pages 2006
Characterisation of direct methanol fuel cells under near-ambient conditions Fulltext Access 9 Pages 2006
Increasing the operation temperature of polymer electrolyte membranes for fuel cells: From nanocomposites to hybrids Fulltext Access 9 Pages 2006
ABLE project: Development of an advanced lead-acid storage system for autonomous PV installations Fulltext Access 9 Pages 2006
A three-dimensional mathematical model for liquid-fed direct methanol fuel cells Fulltext Access 9 Pages 2006
A novel composite microporous polymer electrolyte prepared with molecule sieves for Li-ion batteries Fulltext Access 9 Pages 2006
Development of an equivalent circuit model of a fuel cell to evaluate the effects of inverter ripple current Fulltext Access 9 Pages 2006
The key to success: Gelled-electrolyte and optimized separators for stationary lead-acid batteries Fulltext Access 9 Pages 2006
Analysis of a hydrometallurgical route to recover base metals from spent rechargeable batteries by liquid–liquid extraction with Cyanex 272 Fulltext Access 9 Pages 2006
Determination of the boundary of carbon formation for dry reforming of methane in a solid oxide fuel cell Fulltext Access 9 Pages 2006
Transient analysis of multicomponent transport with carbon monoxide poisoning effect of a PEM fuel cell Fulltext Access 9 Pages 2006
Model based PEM fuel cell state-of-health monitoring via ac impedance measurements Fulltext Access 9 Pages 2006
Preparation and characterization of supported Pt–Ru catalysts with a high Ru content Fulltext Access 9 Pages 2006
Chitosan–poly(vinyl pyrrolidone) blends as membranes for direct methanol fuel cell applications Fulltext Access 9 Pages 2006
Conditions to prepare PPy/Al2O3/Al used as a solid-state capacitor from aqueous malic solutions Fulltext Access 9 Pages 2006
Performance of thermal cells and batteries made with plasma-sprayed cathodes and anodes Fulltext Access 9 Pages 2006
Effects of Pd substitution on the electrochemical properties of Mg0.9−xTi0.1PdxNi (x = 0.04–0.1) hydrogen storage alloys Fulltext Access 9 Pages 2006
Effect of sub-freezing temperatures on a PEM fuel cell performance, startup and fuel cell components Fulltext Access 9 Pages 2006
Quantification of liquid water accumulation and distribution in a polymer electrolyte fuel cell using neutron imaging Fulltext Access 9 Pages 2006
Predictions of phase temperatures in a porous cathode of polymer electrolyte fuel cells using a two-equation model Fulltext Access 9 Pages 2006
A study of the process parameters for yttria-stabilized zirconia electrolyte films prepared by screen-printing Fulltext Access 9 Pages 2006
Two dimensional modeling study of PBI/H3PO4 high temperature PEMFCs based on electrochemical methods Fulltext Access 9 Pages 2006
Gas-phase particle image velocimetry (PIV) for application to the design of fuel cell reactant flow channels Fulltext Access 9 Pages 2006
Electrocatalytic properties of monometallic and bimetallic nanoparticles-incorporated polypyrrole films for electro-oxidation of methanol Fulltext Access 9 Pages 2006
Thermoelectric power of Gd-doped CeO2 (Gd0.1Ce0.9O(2 â δ) (GDC10)): Measurements on porous samples Fulltext Access 9 Pages 2006
On the relative influence of convection in serpentine flow fields of PEM fuel cells Fulltext Access 9 Pages 2006
Numerical analysis of gas cross-over through the membrane in a proton exchange membrane fuel cell Fulltext Access 9 Pages 2006
Dynamic modeling of a hybrid system of the solid oxide fuel cell and recuperative gas turbine Fulltext Access 9 Pages 2006
System modelling and integration of an intermediate temperature solid oxide fuel cell and ZEBRA battery for automotive applications Fulltext Access 9 Pages 2006
An investigation into polypyrrole-coated 316L stainless steel as a bipolar plate material for PEM fuel cells Fulltext Access 9 Pages 2006
Combinatorial screening of thin film electrocatalysts for a direct methanol fuel cell anode Fulltext Access 9 Pages 2006
Electrochemical and solid-state NMR studies on LiCoO2 coated with Al2O3 derived from carboxylate-alumoxane Fulltext Access 9 Pages 2006
Sulphonated poly(ether ether ketone) membranes for fuel cell application: Thermal and structural characterisation Fulltext Access 9 Pages 2006
Direct methanol fuel cell membranes from Nafion–polybenzimidazole blends Fulltext Access 9 Pages 2006
Impact of hydrogen production on optimal economic operation of a grid-parallel PEM fuel cell power plant Fulltext Access 9 Pages 2006
The effect of additives on the electrochemical properties of Fe/C composite for Fe/air battery anode Fulltext Access 9 Pages 2006
Future energy sources and systems—Acting on climate change and energy security Fulltext Access 9 Pages 2006
SECM characterization of Pt–Ru–WC and Pt–Ru–Co ternary thin film combinatorial libraries as anode electrocatalysts for PEMFC Fulltext Access 9 Pages 2006
Analysis of the passive surface film on a graphite electrode charged in polysiloxane-based electrolyte Fulltext Access 9 Pages 2006
Poly(ethyl methacrylate) and poly(2-ethoxyethyl methacrylate) based polymer gel electrolytes Fulltext Access 9 Pages 2006
Performance analysis on various system layouts for the combination of an ambient pressure molten carbonate fuel cell and a gas turbine Fulltext Access 9 Pages 2006
A polymer electrolyte fuel cell life test: 3 years of continuous operation Fulltext Access 9 Pages 2006
Durability of (Pr0.7Sr0.3)MnO3±δ/8YSZ composite cathodes for solid oxide fuel cells Fulltext Access 9 Pages 2006
Predictive control of solid oxide fuel cells using fuzzy Hammerstein models Fulltext Access 9 Pages 2006
Experimental determination of effective surface area and conductivities in the porous anode of molten carbonate fuel cell Fulltext Access 9 Pages 2006
Chemical and radiation crosslinked polymer electrolyte membranes prepared from radiation-grafted ETFE films for DMFC applications Fulltext Access 9 Pages 2006
High throughput evaluation of perovskite-based anode catalysts for direct methanol fuel cells Fulltext Access 9 Pages 2006
Colloidal Au and Au-alloy catalysts for direct borohydride fuel cells: Electrocatalysis and fuel cell performance Fulltext Access 9 Pages 2006