Evaluation of the inhibitive effect of some plant extracts on the acid corrosion of mild steel Fulltext Access 6 Pages 2008
Study on corrosion resistance of palladium films on 316L stainless steel by electroplating and electroless plating Fulltext Access 6 Pages 2008
A self-doped conducting polymer “polyanthranilic acid”: An efficient corrosion inhibitor for mild steel in acidic solution Fulltext Access 6 Pages 2008
XPS studies on passive film formed on stainless steel in a high-temperature and high-pressure methanol solution containing chloride ions Fulltext Access 6 Pages 2008
Nano-pit corrosion of the tabs in aluminum electrolytic capacitor: Polarization characteristics of the tabs in ethyleneglycol–borate solution with chloride ions Fulltext Access 6 Pages 2008
Interpretation of Scanning Kelvin Probe potential maps for coated steel using semi-quantitative current density maps Fulltext Access 6 Pages 2008
Investigation on inhibition behavior of S-triazole-triazole derivatives in acidic solution Fulltext Access 6 Pages 2008
Relationship between shear stress on the walls of a pipe and an impinging jet Fulltext Access 6 Pages 2008
Effect of annealing treatment on the oxidation of an electrodeposited alumina-forming Ni–Al nanocomposite Fulltext Access 6 Pages 2008
Influence of Ti(IV) on the structure and properties of zinc hydroxychloride Fulltext Access 6 Pages 2008
Furfuryl alcohol as corrosion inhibitor for N80 steel in hydrochloric acid Fulltext Access 6 Pages 2008
Comparative studies on the corrosion properties of a Fe–Mn–Al–Si steel and an interstitial-free steel Fulltext Access 6 Pages 2008
Evaluation of the corrosion of UNS G10200 steel in aerated brines under hydrodynamic conditions Fulltext Access 6 Pages 2008
Electrochemical and XPS studies of AISI 316L stainless steel after electropolishing in a magnetic field Fulltext Access 6 Pages 2008
Material characterization and corrosion performance of nickel electroplated in supercritical CO2 fluid Fulltext Access 6 Pages 2008
The effect of grain size and aging on hydrogen embrittlement of a maraging steel Fulltext Access 6 Pages 2008
Synthesis and properties of (BaxPb1âx)(Zn1/3Nb2/3)O3 relaxor ferroelectric ceramics using a reaction-sintering process Fulltext Access 6 Pages 2008
Effect of dispersants on the rheology of aqueous silicon carbide suspensions Fulltext Access 6 Pages 2008
Microstructure and mechanical properties of hot-pressed SiC/(W, Ti)C ceramic composites Fulltext Access 6 Pages 2008
Characterization and corrosion studies of ceria thin film based on fluorinated AZ91D magnesium alloy Fulltext Access 6 Pages 2008
Electrochemical behaviour enhancement of stainless steels by a SiO2 PACVD coating Fulltext Access 6 Pages 2008
Electrochemical corrosion behavior of X-65 steel in the simulated oil–sand slurry. II: Synergism of erosion and corrosion Fulltext Access 6 Pages 2008
Influences of ion migration and electric field on the layered anodic films on Al–Mg alloys Fulltext Access 6 Pages 2008
Electrodeposition of a protective copper/nickel deposit on the magnesium alloy (AZ31) Fulltext Access 6 Pages 2008
Variation of carbon steel corrosion rate with flow conditions in the presence of an inhibitive formulation Fulltext Access 6 Pages 2008
Corrosion of ultra-fine grained copper fabricated by equal-channel angular pressing Fulltext Access 6 Pages 2008
Atmospheric corrosion of hot and cold rolled carbon steel under field exposure in Saudi Arabia Fulltext Access 6 Pages 2008
Quantum chemical molecular dynamics study of stress corrosion cracking behavior for fcc Fe and Fe–Cr surfaces Fulltext Access 6 Pages 2008
Corrosion protection properties of hydroxamic acid self-assembled monolayer on carbon steel Fulltext Access 6 Pages 2008
Aluminium electroplated from ionic liquids as protective coating against steel corrosion Fulltext Access 6 Pages 2008
Influence of the aging time of yttria stabilized zirconia slips on the cracking behavior during drying and green properties of cast tapes Fulltext Access 6 Pages 2008
Surfactant inhibition of aluminium pigments for waterborne printing inks Fulltext Access 6 Pages 2008
Corrosion inhibition of dibenzo [1,4,8,11] tetraaza [14] annulene nickel on steel in 1 M HCl Fulltext Access 6 Pages 2008
Characterization of air-formed surface oxide film on Ti–29Nb–13Ta–4.6Zr alloy surface using XPS and AES Fulltext Access 6 Pages 2008
The effect of ultrasonic irradiation during electropolymerization of polypyrrole on corrosion prevention of the coated steel Fulltext Access 6 Pages 2008
Effect of common water contaminants on the corrosion of aluminium alloys in ethylene glycol–water solution Fulltext Access 6 Pages 2008
Iron oxidation kinetics study by using infrared spectral emissivity measurements below 570 °C Fulltext Access 6 Pages 2008
Depassivation current transients measured between identical twin microelectrodes in open circuit Fulltext Access 6 Pages 2008
Galvanic currents and corrosion rates of reinforcements measured in cells simulating different pitting areas caused by chloride attack in sodium hydroxide Fulltext Access 6 Pages 2008
Impact of unrestrained Delayed Ettringite Formation-induced expansion on concrete mechanical properties Fulltext Access 6 Pages 2008
Method for simultaneous determination of sorption isotherms and diffusivity of cement-based materials Fulltext Access 6 Pages 2008
Capillary absorption of water and n-decane by autoclaved aerated concrete Fulltext Access 6 Pages 2008
A novel indirect tensile test method to measure the biaxial tensile strength of concretes and other quasibrittle materials Fulltext Access 6 Pages 2008
Surface carbonation of synthetic C-S-H samples: A comparison between fresh and aged C-S-H using X-ray photoelectron spectroscopy Fulltext Access 6 Pages 2008
Determination of the elastic constants of portlandite by Brillouin spectroscopy Fulltext Access 6 Pages 2008
Rheological and mechanical properties of mortars prepared with natural and manufactured sands Fulltext Access 6 Pages 2008
Comparison of the fixation of heavy metals in raw material, clinker and mortar using a BCR sequential extraction procedure and NEN7341 test Fulltext Access 6 Pages 2008
The effect of cooling rate on the fluidity of mortar made from kiln clinker Fulltext Access 6 Pages 2008
Effect of crack opening on the local diffusion of chloride in cracked mortar samples Fulltext Access 6 Pages 2008
Engineering expression of the ClinConc model for prediction of free and total chloride ingress in submerged marine concrete Fulltext Access 6 Pages 2008
Relationships between crystal structure and microwave dielectric properties of (Zn1/3B2/35+)xTi1 − xO2 (B5+ = Nb, Ta) ceramics Fulltext Access 6 Pages 2008
Chemical alteration of calcium silicate hydrate (C–S–H) in sodium chloride solution Fulltext Access 6 Pages 2008
Investigation of punctiform, plane and hybrid joints of textile-reinforced concrete parts Fulltext Access 6 Pages 2008
Bonding and abrasion resistance of geopolymeric repair material made with steel slag Fulltext Access 6 Pages 2008
Bending behavior of ferrocement plates in sodium and magnesium sulfates solutions Fulltext Access 6 Pages 2008
Recycling of EPS: A new methodology for production of concrete impregnated with polystyrene (CIP) Fulltext Access 6 Pages 2008
Composite cement of magnesium-bearing phosphoaluminate–hydroxyapatite reinforced by treated raw silk fiber Fulltext Access 6 Pages 2008
Effect of curing method on characteristics of cold bonded fly ash aggregates Fulltext Access 6 Pages 2008
Investigation on the influence of granular packing on the flow properties of cementitious suspensions Fulltext Access 6 Pages 2008
Damage behavior of geopolymer composites exposed to elevated temperatures Fulltext Access 6 Pages 2008
A varistor–polymer composite with nonlinear electrical-thermal switching properties Fulltext Access 6 Pages 2008
High-temperature proton conductor Sr(Ce0.6Zr0.4)0.9Y0.1O3 − δ: Preparation, sintering and electrical properties Fulltext Access 6 Pages 2008
Effects of zirconium silicate and chromite addition on the microstructure and bulk density of magnesia–magnesium aluminate spinel-based refractory materials Fulltext Access 6 Pages 2008
Processing and microstructure characterization of porous corundum–spinel ceramics prepared by in situ decomposition pore-forming technique Fulltext Access 6 Pages 2008
Synthesis of β-SiAlON: A combined method using sol–gel and SHS processes Fulltext Access 6 Pages 2008
Microstructure and reaction phases in Si3N4/Si3N4 joint brazed with Cu-Pd-Ti filler alloy Fulltext Access 6 Pages 2008
Biomimetic apatite deposited on microarc oxidized anatase-based ceramic coating Fulltext Access 6 Pages 2008
Synthesis and characterization of ceramics from coal fly ash and incinerated paper mill sludge Fulltext Access 6 Pages 2008
The influence of Yb and Nd substituents on high-power piezoelectric properties of PMS–PZT ceramics Fulltext Access 6 Pages 2008
An investigation on utilization of poly-electrolytes as dispersant for kaolin slurry and its slip casting properties Fulltext Access 6 Pages 2008
Preparation, characterization and catalytic performance of SrTi0.9Li0.1O3 ultrafine powders Fulltext Access 6 Pages 2008
A novel process of preparing glass-ceramics with pseudo-bioclastic texture Fulltext Access 6 Pages 2008
Porous ceramics with tri-modal pores prepared by foaming and starch consolidation Fulltext Access 6 Pages 2008
Porous indium oxide thin films deposited by electrostatic spray deposition technique Fulltext Access 6 Pages 2008
Synthesis and cathodoluminescence properties of porous wood (fir)-templated zinc oxide Fulltext Access 6 Pages 2008
Influence of magnesia on the structure and properties of MgO-Al2O3-SiO2-F− glass-ceramics Fulltext Access 6 Pages 2008
Preparation of ZnO nanorod by solvothermal reaction of zinc acetate in various alcohols Fulltext Access 6 Pages 2008
Investigation on the microstructure of self-reinforced Nd-α-sialon ceramics Fulltext Access 6 Pages 2008
Electrophoretic deposition and characterization of helical piezoelectric actuator Fulltext Access 6 Pages 2008
Enhanced dielectric tunability properties of Ba(ZrxTi1−x)O3 thin films using seed layers on Pt/Ti/SiO2/Si substrates Fulltext Access 6 Pages 2008