A procedure to embed fibre Bragg grating strain sensors into GFRP sandwich structures Fulltext Access 10 Pages 2007
Experimental investigation of delamination buckling of stitched composite laminates Fulltext Access 10 Pages 2007
Effects of the presence of compression in transverse cyclic loading on fibre–matrix debonding in unidirectional composite plies Fulltext Access 10 Pages 2007
In situ measurements of through-the-thickness strains during processing of AS4/8552 composite Fulltext Access 10 Pages 2007
On modelling of damage evolution in textile composites on meso-level via property degradation approach Fulltext Access 10 Pages 2007
Effect of damage levels and curing stresses on delamination growth behaviour emanating from circular holes in laminated FRP composites Fulltext Access 10 Pages 2007
Studies on lignocellulosic fibers of Brazil: Part III – Morphology and properties of Brazilian curauá fibers Fulltext Access 10 Pages 2007
Modelling the flow of particle-filled resin through a fibrous preform in liquid composite molding technologies Fulltext Access 10 Pages 2007
Mechanical properties of CFRP laminates manufactured from unidirectional prepregs using CSCNT-dispersed epoxy Fulltext Access 10 Pages 2007
Delamination detection and characterisation of bridging tractions using long FBG optical sensors Fulltext Access 10 Pages 2007
Application of the effective crack method to mode I and mode II interlaminar fracture of carbon/epoxy unidirectional laminates Fulltext Access 10 Pages 2007
Burst strength evaluation of the FW-CFRP hybrid composite pipes considering plastic deformation of the liner Fulltext Access 10 Pages 2007
Development of carbon nanofiber reinforced hydroxyapatite with enhanced mechanical properties Fulltext Access 10 Pages 2007
Fully 212D flow modeling of resin infusion under flexible tooling using unstructured meshes and wet and dry compaction properties Fulltext Access 10 Pages 2007
Toughening polymeric composites using nanoclay: Crack tip scale effects on fracture toughness Fulltext Access 10 Pages 2007
Steel truss/composite skin hybrid ship hull, Part II: Manufacturing and sagging testing Fulltext Access 10 Pages 2007
Creep and dynamic mechanical behavior of PP–jute composites: Effect of the interfacial adhesion Fulltext Access 10 Pages 2007
The effect of types of maleic anhydride-grafted polypropylene (MAPP) on the interfacial adhesion properties of bio-flour-filled polypropylene composites Fulltext Access 10 Pages 2007
Agro-residue reinforced high-density polyethylene composites: Fiber characterization and analysis of composite properties Fulltext Access 10 Pages 2007
Crushing energy absorption of GFRP sandwich panels and corresponding monolithic laminates Fulltext Access 10 Pages 2007
Fracture toughness of carbides in tool steels evaluated by nanoindentation Fulltext Access 10 Pages 2007
Nanostructured coatings of glass fibers: Improvement of alkali resistance and mechanical properties Fulltext Access 10 Pages 2007
On the microstructure formation in chromium steels rapidly cooled from the semi-solid state Fulltext Access 10 Pages 2007
In situ neutron diffraction study of residual stress development in MgO/SiC ceramic nanocomposites during thermal cycling Fulltext Access 10 Pages 2007
High-strain-rate superplastic flow in tetragonal ZrO2 polycrystal enhanced by the dispersion of 30Â vol.% MgAl2O4 spinel particles Fulltext Access 10 Pages 2007
Barrier-free heterogeneous grain nucleation in polycrystalline materials: The austenite to ferrite phase transformation in steel Fulltext Access 10 Pages 2007
Highly textured and twinned Cu films fabricated by pulsed electrodeposition Fulltext Access 10 Pages 2007
Structure stability of Ti3AlC2 in Cu and microstructure evolution of Cu-Ti3AlC2 composites Fulltext Access 10 Pages 2007
The austenite to ferrite transformation of Fe-Ni under the influence of a uniaxially applied tensile stress Fulltext Access 10 Pages 2007
Effect of a laser pre-quenched steel substrate surface on the crack driving force in a coating-steel substrate system Fulltext Access 10 Pages 2007
Piezoelectric transducer arrangement for the inspection of large composite structures Fulltext Access 10 Pages 2007
Low-frequency internal friction of hydrogen-free and hydrogen-doped NiTi alloys Fulltext Access 10 Pages 2007
Changes in mass and stress during anodic oxidation and cathodic reduction of the Cu/Cu2O multilayer film Fulltext Access 10 Pages 2007
Formation and breakdown of surface films on magnesium and its alloys in aqueous solutions Fulltext Access 10 Pages 2007
A study of the effect of surface treatments on the tensile strength of flax fibres: Part II. Application of Weibull statistics Fulltext Access 10 Pages 2007
Electroless nickel coated short carbon fibres in aluminium matrix composites Fulltext Access 10 Pages 2007
Infusion design methodology for thick-section, low-permeability preforms using inter-laminar flow media Fulltext Access 10 Pages 2007
Mechanical performance of hybrid bismaleimide composites reinforced with three-dimensional braided carbon and Kevlar fabrics Fulltext Access 10 Pages 2007
Impact essential work of fracture of polypropylene/montmorillonite nanocomposites toughened with SEBS-g-MA elastomer Fulltext Access 10 Pages 2007
Monotonic and fatigue behaviour of chopped-strand-mat/polyester composites with rigid and flexibilised matrix Fulltext Access 10 Pages 2007
Optimising the flow pipe arrangement for resin infusion under flexible tooling Fulltext Access 10 Pages 2007
The variation of the unstrained lattice parameter in an AA7010 friction stir weld Fulltext Access 10 Pages 2007
Corrosion behaviour of blended cements in low and medium strength concretes Fulltext Access 10 Pages 2007
Correlation of fiber dispersion, rheology and mechanical performance of FRCs Fulltext Access 10 Pages 2007
Application of maturity method to slipforming operations: Performance validation Fulltext Access 10 Pages 2007
Effect of variations in the plate modulus of elasticity on the failure modes of FRP plated R.C. beams Fulltext Access 10 Pages 2007
Carbonation of concrete bridge structures in three South African localities Fulltext Access 10 Pages 2007
An experimental study on optimum usage of GGBS for the compressive strength of concrete Fulltext Access 10 Pages 2007
Chloride penetration into concrete structures in the marine atmosphere zone – Relationship between deposition of chlorides on the wet candle and chlorides accumulated into concrete Fulltext Access 10 Pages 2007
Enhancing the performance of pre-cast concrete blocks by incorporating waste glass – ASR consideration Fulltext Access 10 Pages 2007
Multi-variable statistical analysis for scaling resistance of concrete containing GGBFS Fulltext Access 10 Pages 2007
Microstructure–mechanical property relationships in ultrafine-grained NbZr Fulltext Access 10 Pages 2007
Structure and chemical analysis of aluminum wear debris: Experiments and ab initio simulations Fulltext Access 10 Pages 2007
Non-isothermal creep at very high temperature of the nickel-based single crystal superalloy MC2 Fulltext Access 10 Pages 2007
Evolution of crack-tip transformation zones in superelastic Nitinol subjected to in situ fatigue: A fracture mechanics and synchrotron X-ray microdiffraction analysis Fulltext Access 10 Pages 2007
Microstructure-based modeling of the influence of particle spatial distribution and fracture on crack growth in particle-reinforced composites Fulltext Access 10 Pages 2007
Fast X-ray tomography and acoustic emission study of damage in metals during continuous tensile tests Fulltext Access 10 Pages 2007
A modified embedded-atom method interatomic potential for the Fe–H system Fulltext Access 10 Pages 2007
Effect of process parameters on bead properties of A359/SiC MMCs welded by laser Fulltext Access 10 Pages 2007
Extrusion and mechanical properties of highly filled cellulose fibre–polypropylene composites Fulltext Access 10 Pages 2007
Characteristics of Hermès flax fibres as a function of their location in the stem and properties of the derived unidirectional composites Fulltext Access 10 Pages 2007
Fabrication of continuous carbon fiber-reinforced aluminum–magnesium alloy composite wires using ultrasonic infiltration method Fulltext Access 10 Pages 2007
Large deformation response of a hyperelastic fibre reinforced composite: Theoretical model and numerical validation Fulltext Access 10 Pages 2007
Development and effect of alkali treatment on tensile properties of curaua fiber green composites Fulltext Access 10 Pages 2007
Interaction between sulfate and chloride solution attack of concretes with and without fly ash Fulltext Access 10 Pages 2007
Effects and interactions of temperature and stress-level related damage on permeability of concrete Fulltext Access 10 Pages 2007
An experimental approach for the analysis of early-age behaviour of high-performance concrete structures under restrained shrinkage Fulltext Access 10 Pages 2007
Experimental limitations regarding the formation and characterization of uranium-mineral phases in concrete waste forms Fulltext Access 10 Pages 2007
Compression behavior of micro-scale truss structures formed from self-propagating polymer waveguides Fulltext Access 10 Pages 2007
Non-ideal solid solution aqueous solution modeling of synthetic calcium silicate hydrate Fulltext Access 10 Pages 2007
Crystallisation of calcium hydroxide in early age model and ordinary cementitious systems Fulltext Access 10 Pages 2007
Determination of the elemental distribution and chemical speciation in highly heterogeneous cementitious materials using synchrotron-based micro-spectroscopic techniques Fulltext Access 10 Pages 2007
The corrosion resistance of coated steel dowels determined by impedance spectroscopy Fulltext Access 10 Pages 2007
Tensile and fiber dispersion performance of ECC (engineered cementitious composites) produced with ground granulated blast furnace slag Fulltext Access 10 Pages 2007
Time-dependent response of ECC: Characterisation of creep and rate dependence Fulltext Access 10 Pages 2007
Phase distribution and microstructural changes of self-compacting cement paste at elevated temperature Fulltext Access 10 Pages 2007
A case history: Effect of moisture on the setting behaviour of a Portland cement reacting with an alkali-free accelerator Fulltext Access 10 Pages 2007
Fingerprinting of South African ordinary Portland cements, cement blends and mortars for identification purposes — Discrimination with starplots and PCA Fulltext Access 10 Pages 2007