Stress effects on mass transport in polymers: a model for volume relaxation Fulltext Access 10 Pages 2006
Evaluation of impact damage mechanism of multi-axial stitched CFRP laminate Fulltext Access 10 Pages 2006
The effect of fiber surface treatments on the tensile and water sorption properties of polypropylene–luffa fiber composites Fulltext Access 10 Pages 2006
The use of kinematic drape modelling to inform the hand lay-up of complex composite components using woven reinforcements Fulltext Access 10 Pages 2006
Structural response of liquid-cooled GFRP slabs subjected to fire – Part I: Material and post-fire modeling Fulltext Access 10 Pages 2006
Hygroscopic thickness swelling rate of compression molded wood fiberboard and wood fiber/polymer composites Fulltext Access 10 Pages 2006
The role of fibre/matrix interactions on the dynamic mechanical properties of chemically modified banana fibre/polyester composites Fulltext Access 10 Pages 2006
Comparison of damage development in C/epoxy laminates during isothermal ageing or thermal cycling Fulltext Access 10 Pages 2006
Characterization of residual strains in an epoxy block using an embedded FBG sensor and the OLCR technique Fulltext Access 10 Pages 2006
Optimum material composition design for thermal stress reduction in FGM lathe bit Fulltext Access 10 Pages 2006
Material characterisation and calibration of a meso-mechanical damage model for braid reinforced composites Fulltext Access 10 Pages 2006
Intraply shear characterisation of a fibre reinforced thermoplastic composite Fulltext Access 10 Pages 2006
A process performance index based on gate-distance and incubation time for the optimization of gate locations in liquid composite molding processes Fulltext Access 10 Pages 2006
An experimental investigation of non-elastic deformation of fibrous reinforcements in composites manufacturing Fulltext Access 10 Pages 2006
Recycling technologies for thermoset composite materials—current status Fulltext Access 10 Pages 2006
Sol–gel synthesis of lithium aluminum silicate powders: The effect of silica source Fulltext Access 10 Pages 2006
Analysis of γ â α transformation in a Nb micro-alloyed C-Mn steel by phase field modelling Fulltext Access 10 Pages 2006
Neutron and X-ray diffraction measurements on micro- and nano-sized precipitates embedded in a Ni-based superalloy and after their extraction from the alloy Fulltext Access 10 Pages 2006
Property improvements of in situ epoxy nanocomposites with reduced interparticle distance at high nanosilica content Fulltext Access 10 Pages 2006
Stress-corrosion fatigue-crack growth in a Zr-based bulk amorphous metal Fulltext Access 10 Pages 2006
A comparative study of structural and impedance spectroscopic analysis of LixMVO4 (M = Ni, Co; x = 0.8, 1.0, 1.2) Fulltext Access 10 Pages 2006
Origin of the modified orientation relationship for S(Sâ³)-phase in Al-Mg-Cu alloys Fulltext Access 10 Pages 2006
Microstrain and self-limited grain growth in nanocrystalline ceria ceramics Fulltext Access 10 Pages 2006
In situ gravimetry of nickel thin film during potentiodynamic polarization in acidic and alkaline sulfate solutions Fulltext Access 10 Pages 2006
Improving the Na2SO4-induced corrosion resistance of Ti3AlC2 by pre-oxidation in air Fulltext Access 10 Pages 2006
The influence of lithium on the kinetics and mechanism of manganese sulphidation Fulltext Access 10 Pages 2006
Pitting transients analysis of stainless steels at the open circuit potential Fulltext Access 10 Pages 2006
Critical energy release rate for a CSM reinforced carbon fibre composite/steel bonding Fulltext Access 10 Pages 2006
Sensitivity and uncertainty analyses for FE thermal model of FRP panel exposed to fire Fulltext Access 10 Pages 2006
Constituent based analysis of composite materials subjected to fire conditions Fulltext Access 10 Pages 2006
Characterisation of thermoset laminates for cosmetic automotive applications: Part II – Cure and residual volatile assessment Fulltext Access 10 Pages 2006
Strength and chemical resistance of mortars containing brick manufacturing clays subjected to different treatments Fulltext Access 10 Pages 2006
High-temperature plastic deformation of Er2O3-doped ZrO2 single crystals Fulltext Access 10 Pages 2006
3D surface image analysis for fracture modeling of cement-based materials Fulltext Access 10 Pages 2006
Reactive pozzolanas from rice husk ash: An alternative to cement for rural housing Fulltext Access 10 Pages 2006
Heat of hydration in foamed concrete: Effect of mix constituents and plastic density Fulltext Access 10 Pages 2006
A thixotropy model for fresh fluid concretes: Theory, validation and applications Fulltext Access 10 Pages 2006
Modelling of slaked lime–metakaolin mortar engineering characteristics in terms of process variables Fulltext Access 10 Pages 2006
Effect of sludge water from ready-mixed concrete plant on properties and durability of concrete Fulltext Access 10 Pages 2006
Solid state NMR investigations on the role of organic admixtures on the hydration of cement pastes Fulltext Access 10 Pages 2006
Damage assessment in cellulose–cement composites using dynamic mechanical characteristics Fulltext Access 10 Pages 2006
Corrosion behaviour in concrete of three differently galvanized steel bars Fulltext Access 10 Pages 2006
Alteration of alkali reactive aggregates autoclaved in different alkali solutions and application to alkali-aggregate reaction in concrete (II) expansion and microstructure of concrete microbar Fulltext Access 10 Pages 2006
On the ultrasonic assessment of adhesion between polymer coating and concrete substrate Fulltext Access 10 Pages 2006
Comparison of ultrasonic wave reflection method and maturity method in evaluating early-age compressive strength of mortar Fulltext Access 10 Pages 2006
Creep and durability of sand-coated glass FRP bars in concrete elements under freeze/thaw cycling and sustained loads Fulltext Access 10 Pages 2006
Estimation of the effective properties of particle-reinforced metal–matrix composites from microtomographic reconstructions Fulltext Access 10 Pages 2006
Two-grain nanoindentation using the quasicontinuum method: Two-dimensional model approach Fulltext Access 10 Pages 2006
In situ synchrotron X-ray diffraction of ferroelastic La0.8Ca0.2CoO3 ceramics during uniaxial compression Fulltext Access 10 Pages 2006
The relation between wetting and interfacial chemistry in the CuAgTi/alumina system Fulltext Access 10 Pages 2006
Rheometric and ultrasonic investigations of viscoelastic properties of fresh Portland cement pastes Fulltext Access 10 Pages 2006
Dispersion of lanthanoid-coated barium titanate in a paraffin-based extrusion binder system Fulltext Access 10 Pages 2006
A concrete mix proportion design algorithm based on artificial neural networks Fulltext Access 10 Pages 2006
Stability of ancient masonry towers: Stress redistribution due to drying, carbonation, and creep Fulltext Access 10 Pages 2006
Stability of ancient masonry towers: Moisture diffusion, carbonation and size effect Fulltext Access 10 Pages 2006
Application of √t-type, logarithmic and half-time methods in desorptive measurements of diffusivity in narrow humidity ranges Fulltext Access 10 Pages 2006
Effect of high temperatures on high performance steel fibre reinforced concrete Fulltext Access 10 Pages 2006
Restraining effects of fibers during non-uniform drying of cement composites Fulltext Access 10 Pages 2006
Rheological properties of grouts with viscosity modifying agents as diutan gum and welan gum incorporating pulverised fly ash Fulltext Access 10 Pages 2006
The microstructure of concrete made with municipal waste incinerator bottom ash as an aggregate component Fulltext Access 10 Pages 2006
Setting time determination of cementitious materials based on measurements of the hydraulic pressure variations Fulltext Access 10 Pages 2006
In-situ monitoring the realkalisation process by neutron diffraction: Electroosmotic flux and portlandite formation Fulltext Access 10 Pages 2006
Irreversible dilation of NaCl contaminated lime–cement mortar due to crystallization cycles Fulltext Access 10 Pages 2006
Synthesis, characterization and reaction behaviour of lamellar AFm phases with aliphatic sulfonate-anions Fulltext Access 10 Pages 2006
Study of the mechanical behavior of masonry repair lime-based mortars cured and exposed under different conditions Fulltext Access 10 Pages 2006
Effects of organo-modified montmorillonite on strengths and permeability of cement mortars Fulltext Access 10 Pages 2006
Green and early age compressive strength of extruded cement mortar monitored with compression tests and ultrasonic techniques Fulltext Access 10 Pages 2006
Coupled effect of time and temperature on variations of yield value of highly flowable mortar Fulltext Access 10 Pages 2006
NMR diffusion and relaxation studies during cement hydration—A non-destructive approach for clarification of the mechanism of internal post curing of cementitious materials Fulltext Access 10 Pages 2006
Application of 19F NMR relaxometry to the determination of porosity and pore size distribution in hydrated cements and other porous materials Fulltext Access 11 Pages 2006
Performance of volcanic ash and pumice based blended cement concrete in mixed sulfate environment Fulltext Access 11 Pages 2006