Non-contact determination of elastic moduli of continuous fiber reinforced metals Fulltext Access 6 Pages 2005
Processing and characterization of TiO2/ZnAl2O4 ultrafiltration membranes deposited on tubular support prepared from Moroccan clay Fulltext Access 6 Pages 2005
Processing and properties of cobalt-substituted lithium ferrite in the GHz frequency range Fulltext Access 6 Pages 2005
Effect of nano addition on the microstructures and mechanical properties of Ti(C, N)-based cermets Fulltext Access 6 Pages 2005
Synergistic effect of fly ash and blast furnace slag on the mechanical strength of traditional porcelain tiles Fulltext Access 6 Pages 2005
Synthesis of calcium phosphate bioceramics by citrate gel pyrolysis method Fulltext Access 6 Pages 2005
Effect of Cr2O3, Fe2O3 and TiO2 nucleants on the crystallization behaviour of SiO2-Al2O3-CaO-MgO(R2O) glass-ceramics Fulltext Access 6 Pages 2005
Electrical and microstructural properties of (Zn, Nb, Fe)-doped SnO2 varistor systems Fulltext Access 6 Pages 2005
Ceramic processing of municipal sewage sludge (MSS) and steelworks slags (SS) Fulltext Access 6 Pages 2005
Influence of fibre volume fraction on mode II interlaminar fracture toughness of glass/epoxy using the 4ENF specimen Fulltext Access 6 Pages 2005
Effect of residual stresses on the fracture behaviour of notched laminated composites loaded in flexural geometry Fulltext Access 6 Pages 2005
Thermally activated relaxation processes in superhard nc-TiN/a-Si3N4 and nc-(Ti1 â xAlx)N/a-Si3N4 nanocomposites studied by means of internal friction measurements Fulltext Access 6 Pages 2005
Influence of alumina addition on grain growth and room temperature mechanical properties of 8YSCZ/Al2O3 composites Fulltext Access 6 Pages 2005
Damping behavior of fibrous composites with viscous interface under longitudinal shear loads Fulltext Access 6 Pages 2005
The effect of specimen width on the bending strength of ceramic matrix textile composites Fulltext Access 6 Pages 2005
Nonlinear correction to the bending stiffness of a damaged composite beam Fulltext Access 6 Pages 2005
Molecular dynamics study of specific interactions in grafted polypropylene organomodified clay nanocomposite Fulltext Access 6 Pages 2005
The adsorption and corrosion inhibition of some cationic gemini surfactants on carbon steel surface in hydrochloric acid Fulltext Access 6 Pages 2005
Ageing effects in the growth of chromate conversion coatings on aluminium Fulltext Access 6 Pages 2005
Spark plasma sintering reaction synthesized TiB reinforced titanium matrix composites Fulltext Access 6 Pages 2005
Polyimide/silica/titania nanohybrids via a novel non-hydrolytic sol-gel route Fulltext Access 6 Pages 2005
Delamination monitoring of laminated composites subjected to low-velocity impact using small-diameter FBG sensors Fulltext Access 6 Pages 2005
Optimum linear and nonlinear viscoelastic designer functionally graded materials-Characterizations and analysis Fulltext Access 6 Pages 2005
Transient gas flow technique for inspection of fiber preforms in resin transfer molding Fulltext Access 6 Pages 2005
Coupling effect of interphase and fibre-bridging on the toughness of FRP Fulltext Access 6 Pages 2005
'Bleeding composites'-damage detection and self-repair using a biomimetic approach Fulltext Access 6 Pages 2005
Electrical properties of carbon-containing epoxy compositions under shape memory effect realization Fulltext Access 6 Pages 2005
Effects of wrap thickness and ply configuration on composite-confined concrete cylinders Fulltext Access 6 Pages 2005
Microstructure and morphology of nimesulide/crospovidone nanocomposites by Raman and electron microscopies Fulltext Access 6 Pages 2005
Polymer-filler interactions in kaolin/nylon 6,6 composites containing a silane coupling agent Fulltext Access 6 Pages 2005
Solution to filling time prediction issues for constant pressure driven injection in RTM Fulltext Access 6 Pages 2005
Visualisation of barely visible impact damage in polymer matrix composites using an optical deformation and strain measurement system (ODSMS) Fulltext Access 6 Pages 2005
Densification and mechanical properties of CaB6 with nickel as a sintering aid Fulltext Access 6 Pages 2005
Effect of substrate type on nanostructured titania sol-gel coatings for sensors applications Fulltext Access 6 Pages 2005
Synthesis, evaluation and characterization of alumina ceramics with elongated grains Fulltext Access 6 Pages 2005
Thermodynamics of volume-collapse transitions in cerium and related compounds Fulltext Access 6 Pages 2005
Characterization of a novel bioactive composite using advanced X-ray computed tomography Fulltext Access 6 Pages 2005
Experimental fatigue crack growth and crack-front shape analysis of asymmetric repaired aluminium panels with glass/epoxy composite patches Fulltext Access 6 Pages 2005
An investigation on the post-buckling behavior of symmetric cross-ply laminated plates using a semi-energy finite strip approach Fulltext Access 6 Pages 2005
Near-field microwave image formation of defective composites utilizing open-ended waveguides with arbitrary cross sections Fulltext Access 6 Pages 2005
Finite element simulation of low velocity impact on shape memory alloy composite plates Fulltext Access 6 Pages 2005
Micromechanics based analysis of randomly distributed fiber reinforced composites using simplified unit cell model Fulltext Access 6 Pages 2005
First-principles growth kinetics and morphological evolution of Cu nanoscale particles in Al Fulltext Access 6 Pages 2005
Atomistic study on the structure and thermodynamic properties of Cr7C3, Mn7C3, Fe7C3 Fulltext Access 6 Pages 2005
Interplay of uniform and random anisotropy in nanocrystalline soft magnetic alloys Fulltext Access 6 Pages 2005
Mesoscopic structure control of spray formed high strength Al–Zn–Mg–Cu alloys Fulltext Access 6 Pages 2005
Real-time observation of grain nucleation and growth during solidification of aluminium alloys Fulltext Access 6 Pages 2005
Particle coarsening: I. Kinetics for reversible dissolution/deposition controlled process Fulltext Access 6 Pages 2005
Assessing the elastic parameters and energy-dissipation capacity of solid materials: A residual indent may tell all Fulltext Access 6 Pages 2005
The difference of phase distributions in silicon after indentation with Berkovich and spherical indenters Fulltext Access 6 Pages 2005
In situ investigation of subcritical crack growth in lead zirconate titanate ceramics using atomic force microscopy Fulltext Access 6 Pages 2005
A novel use of constrained sintering to determine the viscous Poisson’s ratio of densifying materials Fulltext Access 6 Pages 2005
Raman and Rayleigh mapping of corrosion and mechanical aging in SiC fibres Fulltext Access 6 Pages 2005
Effect of interphase on fibre-bridging toughness of a unidirectional FRP composite thin plate Fulltext Access 6 Pages 2005
Scattering of the harmonic anti-plane shear waves by a crack in functionally graded piezoelectric materials Fulltext Access 6 Pages 2005
Finite-element buckling analysis of sandwich columns containing a face/core debond Fulltext Access 6 Pages 2005
Effect of the laminate thickness on the composite strength to repeated low energy impacts Fulltext Access 6 Pages 2005
Study of structural and optical properties of InSb-doped SiO2 thin films Fulltext Access 6 Pages 2005
Surface generation of color centers in lithium fluoride by EUV-irradiation Fulltext Access 6 Pages 2005
Electron spin resonance probing of fundamental point defects in nm-sized silica particles Fulltext Access 6 Pages 2005
Fatigue failure behavior of glass/epoxy ±55 filament wound pipes under internal pressure Fulltext Access 6 Pages 2005
Micromechanics based model of fatigue/oxidation for ceramic matrix composites Fulltext Access 6 Pages 2005
The essential work of fracture of polyamide 66 filled with TiO2 nanoparticles Fulltext Access 6 Pages 2005
Nanoscale vibrational analysis of a multi-layered graphene sheet embedded in an elastic medium Fulltext Access 6 Pages 2005
Effects of electron-beam irradiation on wettability and surface free energy of a polypropylene film Fulltext Access 6 Pages 2005
Derivation of the strain energy release rate G from first principles for the pressurized blister test Fulltext Access 6 Pages 2005
Shear strength estimation of adhesively bonded cylindrical components under static loading using the genetic algorithm approach Fulltext Access 6 Pages 2005
Effect of addition of polyvinyl acetate to melamine-formaldehyde resin on the adhesion and formaldehyde emission in engineered flooring Fulltext Access 6 Pages 2005
Effect of moisture content on curing kinetics of pMDI resin and wood mixtures Fulltext Access 6 Pages 2005
Influence of fibre reinforcement and peel ply surface treatment towards adhesion of composite surfaces Fulltext Access 6 Pages 2005
Surface characterization and adhesion of carbon fibers to epoxy and polycarbonate Fulltext Access 6 Pages 2005
Nonlinear elastic wave spectroscopy identification of impact damage on a sandwich plate Fulltext Access 6 Pages 2005