Microstructures and mechanical properties of spray-formed and squeeze-cast Al–25Si–0.89Cu–1.0Ni–0.84Mg alloys in solutionized and aged conditions Fulltext Access 9 Pages 2006
Residual stresses in deformed random-planar aluminium/Saffil® short-fibre composites Fulltext Access 9 Pages 2006
The potential of biocompatible metallic stents and preventing restenosis Fulltext Access 9 Pages 2006
Carbon fabric reinforced polyetherimide composites: Influence of weave of fabric and processing parameters on performance properties and erosive wear Fulltext Access 9 Pages 2006
Dynamic recrystallization of Ni-base alloys—Experimental results and comparisons with simulations Fulltext Access 9 Pages 2006
Fatigue behavior of tailor (laser)-welded blanks for automotive applications Fulltext Access 9 Pages 2006
The effect of chemical grain refinement and low superheat pouring on the structure of NRC castings of aluminium alloy Al–7Si–0.4Mg Fulltext Access 9 Pages 2006
Monte Carlo simulation on tensile failure process of unidirectional carbon fiber reinforced nano-phased epoxy Fulltext Access 9 Pages 2006
Studies on the flexural and thermomechanical properties of woven carbon/nanoclay-epoxy laminates Fulltext Access 9 Pages 2006
Mechanical properties as a function of microstructure and solidification thermal variables of Al–Si castings Fulltext Access 9 Pages 2006
Microstructural investigation of white etching layer on pearlite steel rail Fulltext Access 9 Pages 2006
Role of film intrinsic stress in packaging of multi-layer microelectronic structures Fulltext Access 9 Pages 2006
Microstructure, mechanical properties, and adhesion in IN625 air plasma sprayed coatings Fulltext Access 9 Pages 2006
Effects of moisture and dissolved oxygen in methanol and ethanol solutions containing hydrochloric acid on hydrogen absorption and desorption behaviors of Ni–Ti superelastic alloy Fulltext Access 9 Pages 2006
Microstructure and tensile properties of Y2O3-dispersed titanium produced by arc melting Fulltext Access 9 Pages 2006
Microstructural evolution of Cr–Mn–N austenitic steels during cold work hardening Fulltext Access 9 Pages 2006
Nanoindentation measurements of the mechanical properties of polycrystalline Au and Ag thin films on silicon substrates: Effects of grain size and film thickness Fulltext Access 9 Pages 2006
A probabilistic model for prediction of cleavage fracture in the ductile-to-brittle transition region and the effect of temperature on model parameters Fulltext Access 9 Pages 2006
Discrete dislocation dynamics simulations of surface induced size effects in plasticity Fulltext Access 9 Pages 2006
Comparative study on local and global mechanical properties of 2024 T351, 2024 T6 and 5251 O friction stir welds Fulltext Access 9 Pages 2006
The formation of surface segregates during twin roll casting of aluminium alloys Fulltext Access 9 Pages 2006
Effects of pulse level of Nd-YAG laser on tensile properties and formability of laser weldments in automotive aluminum alloys Fulltext Access 9 Pages 2006
Fatigue behaviour of cast irons with spheroidal vanadium carbides dispersed within martensitic matrix microstructure Fulltext Access 9 Pages 2006
Synthesis and evaluation of hardness and sliding wear resistance of electrodeposited nanocrystalline Ni–W alloys Fulltext Access 9 Pages 2006
Relations between microstructure, precipitation, age-formability and damage tolerance of Al–Cu–Mg–Li (Mn, Zr, Sc) alloys for age forming Fulltext Access 9 Pages 2006
Fatigue damage and fracture behavior of tungsten fiber reinforced Zr-based metallic glassy composite Fulltext Access 9 Pages 2006
Wear resistance of WC particle reinforced copper matrix composites and the effect of porosity Fulltext Access 9 Pages 2006
The hot working characteristics of a boron bearing and a conventional low carbon steel Fulltext Access 9 Pages 2006
Physically based modelling of phase transformations during welding of low-carbon steel Fulltext Access 9 Pages 2006
Comparison of residual stress in martensitic alloys by nondestructive techniques Fulltext Access 9 Pages 2006
Adhesive strength and tensile fracture of Ni particle enhanced Sn–Ag composite solder joints Fulltext Access 9 Pages 2006
Surface composite fabrication using Fe-based alloying powder through infiltration casting technique on copper substrate Fulltext Access 9 Pages 2006
Fracture of sustained tensile-loaded Ti-0.2% Pd alloy in acid and neutral fluoride solutions Fulltext Access 9 Pages 2006
Stress and cracking behavior of plasma sprayed thermal barrier coatings using an advanced constitutive model Fulltext Access 9 Pages 2006
Mixed mode brittle fracture in PMMA—An experimental study using SCB specimens Fulltext Access 9 Pages 2006
Application of equal-channel angular pressing to Cu–Co alloy with ferromagnetic precipitates Fulltext Access 9 Pages 2006
Segregation substructures in dilute Al–Cu alloys directionally solidified Fulltext Access 9 Pages 2006
Processing gamma-based TiAl sheet materials by cyclic cold roll bonding and annealing of elemental titanium and aluminum foils Fulltext Access 9 Pages 2006
Fracture toughness analysis in transition temperature region of API X70 pipeline steels Fulltext Access 9 Pages 2006
Micromechanical modeling of tungsten-based bulk metallic glass matrix composites Fulltext Access 9 Pages 2006
Nanoindentation and nanomachining characteristics of gold and platinum thin films Fulltext Access 9 Pages 2006
Microstructural characterization of precipitates in Cu-10Â wt.%Al-0.8Â wt.%Be shape-memory alloy Fulltext Access 9 Pages 2006
Al–Si coating fused by Al + Si powders formed on Ti–6Al–4V alloy and its oxidation resistance Fulltext Access 9 Pages 2006
Experimental validation of FE predicted fracture behaviour in thermally sprayed coatings Fulltext Access 9 Pages 2006
Localised vibration modes and stop bands for continuous and discrete periodic structures Fulltext Access 9 Pages 2006
Microstructure evolution in a Pb-free solder alloy during mechanical fatigue Fulltext Access 9 Pages 2006
Improving the erosion–corrosion resistance of AISI 316 austenitic stainless steel by low-temperature plasma surface alloying with N and C Fulltext Access 9 Pages 2006
Microstructure transformation during warm working of β-treated lamellar Zircaloy-4 within the upper α-range Fulltext Access 9 Pages 2006
Processing, microstructure and hardness of TiN/(Ti, Al)N multilayer coatings Fulltext Access 9 Pages 2006
Domain structures and nonlinear mechanical deformation of soft Pb(ZrxTi1−x)O3 (PZT) piezoelectric ceramic fibers Fulltext Access 9 Pages 2006
Empirical model predicting the value of the strain-hardening exponent of a Ti-IF steel grade Fulltext Access 9 Pages 2006
A study of weldability and fracture modes in electron beam weldments of AZ series magnesium alloys Fulltext Access 9 Pages 2006
Influence of graphite nodularity on microstructure and processing window of 1.5% Ni–0.3% Mo austempered cast iron Fulltext Access 9 Pages 2006
Prediction of phase transformations during laser surface hardening of AISI 4140 including the effects of inhomogeneous austenite formation Fulltext Access 9 Pages 2006
Mechanical and wear properties of rheocast and conventional gravity die cast A356 alloy Fulltext Access 9 Pages 2006
Experimental study on ratchetting-fatigue interaction of SS304 stainless steel in uniaxial cyclic stressing Fulltext Access 9 Pages 2006
Effect of aging treatments on the kinetics of fatigue crack growth in 7010 aluminum alloy Fulltext Access 9 Pages 2006
Mechanical performance of laminated composites incorporated with nanofibrous membranes Fulltext Access 9 Pages 2006
Nth-nearest neighbor statistics for three-dimensional equilibrium arrays of monodisperse spheres Fulltext Access 9 Pages 2006
Fabrication and characterization of graded impedance impactors for gas gun experiments from tape cast metal powders Fulltext Access 9 Pages 2006
Modelling of Ag3Sn coarsening and its effect on creep of Sn–Ag eutectics Fulltext Access 9 Pages 2006
Simulation of interdendritic liquid permeability for low and high solid fractions during the solidification of mushy alloys Fulltext Access 9 Pages 2006
Mechanical properties and oxidation behavior of the Ti–24Al–14Nb–3V–0.5Mo alloy sheet Fulltext Access 9 Pages 2006
Investigation of low temperature thermal stability in bulk nanocrystalline Ni Fulltext Access 9 Pages 2006
Recrystallisation driving forces against pinning forces in hot rolling of Ti-microalloyed steels Fulltext Access 9 Pages 2006
Hydrostatic stress and hydrostatic stress gradients in passivated copper interconnects Fulltext Access 9 Pages 2006
Mechanical characterization of biocompatible thin film materials by scanning along micro-machined cantilevers for micro-/nano-system Fulltext Access 9 Pages 2006
Microstructural evolution and mechanical behaviors of graded cemented carbides Fulltext Access 9 Pages 2006
Effect of weld intercooling temperature on the structure and impact strength of ferritic–martensitic steels Fulltext Access 9 Pages 2006
Thermal expansion anisotropy in extruded SiC particle reinforced 2080 aluminum alloy matrix composites Fulltext Access 9 Pages 2006
Effect of equal channel angular pressing on tensile properties and fracture modes of casting Al–Cu alloys Fulltext Access 9 Pages 2006
Effects of combined additions of Sr and AlTiB grain refiners in hypoeutectic Al–Si foundry alloys Fulltext Access 9 Pages 2006
Thermal aging effects on the mechanical properties of as-cast Ni3Al-based alloy Fulltext Access 9 Pages 2006
A new model for the time-dependent behaviour of polycrystalline ceramic materials with metallic inter-granular layers under tension Fulltext Access 9 Pages 2006
A cast 7050 friction stir weld with scandium: microstructure, corrosion and environmental assisted cracking Fulltext Access 9 Pages 2006
Avoiding ghost stress on reconstruction of stress- and composition-depth profiles from destructive X-ray diffraction depth profiling Fulltext Access 9 Pages 2006
On the ratchetting limit of forged duplex steels under combined thermal and mechanical loads Fulltext Access 9 Pages 2006
Effect of hexagonal boron nitride and calcined petroleum coke on friction and wear behavior of phenolic resin-based friction composites Fulltext Access 9 Pages 2006
Synthesis and characterization of high volume fraction Al–Al2O3 nanocomposite powders by high-energy milling Fulltext Access 9 Pages 2006
Grain refining performance for Al and Al–Si alloy casts by addition of equal-channel angular pressed Al–5 mass% Ti alloy Fulltext Access 9 Pages 2006
Modelling of deformation and microstructural changes in P/M Rene 95 under isothermal forging conditions Fulltext Access 9 Pages 2006