Droplet mass transfer, intradroplet nucleation and submicron particle production in two-phase flow of solvent-supercritical antisolvent emulsion Fulltext Access 14 Pages 2005
Correlation of the physicochemical properties of symmetric 1,3-dialkoylamidopropane-based cationic lipids containing single primary and tertiary amine polar head groups with in vitro transfection activity Fulltext Access 14 Pages 2005
Investigation into potential mechanisms promoting biocompatibility of polymeric biomaterials containing the phosphorylcholine moiety Fulltext Access 14 Pages 2005
Comparative adsorption of spherical argon and flexible n-butane in carbon slit pores-a GCMC computer simulation study Fulltext Access 14 Pages 2005
Simulation of flow and transport phenomena in a polymer electrolyte fuel cell under low-humidity operation Fulltext Access 14 Pages 2005
Model for the contamination of fuel cell anode catalyst in the presence of fuel stream impurities Fulltext Access 14 Pages 2005
Reliability and cost-benefits of adding alternate power sources to an independent micro-grid community Fulltext Access 14 Pages 2005
Hydrogen production by steam-gasification of petroleum coke using concentrated solar power-I. Thermodynamic and kinetic analyses Fulltext Access 14 Pages 2005
Novel joint deformation models and their application to delamination fracture analysis Fulltext Access 14 Pages 2005
Evolution of water-in-oil emulsion controlled by droplet-bulk ion exchange: acoustic, electroacoustic, conductivity and image analysis Fulltext Access 14 Pages 2005
Different methods for surface modification of hydrophilic particulates with polymers Fulltext Access 14 Pages 2005
The role of hydrophobicity and dissolved gases in non-equilibrium surface phenomena Fulltext Access 14 Pages 2005
In situ and ex situ characterisation of the passive film on a ferritic stainless steel in molten sodium hydroxide Fulltext Access 14 Pages 2005
Hydrophobic recovery of UV/ozone treated poly(dimethylsiloxane): adhesion studies by contact mechanics and mechanism of surface modification Fulltext Access 14 Pages 2005
Investigation of the inhibiting action of O-, S- and N-dithiocarbamato(1,4,8,11-tetraazacyclotetradecane)cobalt(III) complexes on the corrosion of iron in HClO4 acid Fulltext Access 14 Pages 2005
Structural and energetic heterogeneities of pyrocarbon/silica gel systems and their adsorption properties Fulltext Access 14 Pages 2005
Effects of surface treatments and annealing on carbon-based molecular sieve membranes for gas separation Fulltext Access 14 Pages 2005
Si-SiO2 interface formation in low-dose low-energy separation by implanted oxygen materials Fulltext Access 14 Pages 2005
Design and development of artificial neural networks for depositing powders in coating treatment Fulltext Access 14 Pages 2005
Reactive electron beam evaporated gadolinia films at ambient substrate temperature: optical properties and morphology studies Fulltext Access 14 Pages 2005
Brownian dynamics simulation of adsorbed layers of interacting particles subjected to large extensional deformation Fulltext Access 14 Pages 2005
A loop shaping perspective for tuning controllers with adaptive feedforward cancellation Fulltext Access 14 Pages 2005
Surface and interface morphology and structure of amorphous carbon thin and multilayer films Fulltext Access 14 Pages 2005
Assessing the effect of latex particle size and distribution on the rheological and adhesive properties of model waterborne acrylic pressure-sensitive adhesives films Fulltext Access 14 Pages 2005
Oil recovery performances of surfactant solutions by capillary imbibition Fulltext Access 14 Pages 2005
TPR, TPO, and TPD examinations of Cu0.15Ce0.85O2ây mixed oxides prepared by co-precipitation, by the sol-gel peroxide route, and by citric acid-assisted synthesis Fulltext Access 14 Pages 2005
Interactions between particles with an undulated contact line at a fluid interface: Capillary multipoles of arbitrary order Fulltext Access 14 Pages 2005
A spectroscopic study of mechanochemically activated kaolinite with the aid of chemometrics Fulltext Access 14 Pages 2005
Co-solvent effects on drag reduction, rheological properties and micelle microstructures of cationic surfactants Fulltext Access 14 Pages 2005
A finite element based algorithm for determining interfacial tension (γ) from pendant drop profiles Fulltext Access 14 Pages 2005
A comparative study of the physicochemical properties of perfluorinated and hydrogenated amphiphiles Fulltext Access 14 Pages 2005
Use of the liquid-liquid interface for generating ultrathin nanocrystalline films of metals, chalcogenides, and oxides Fulltext Access 14 Pages 2005
Non-isothermal preform infiltration during the vacuum-assisted resin transfer molding (VARTM) process Fulltext Access 14 Pages 2005
Composition and structure of iron oxidation surface layers produced in weak acidic solutions Fulltext Access 14 Pages 2005
Nonlinear evolution of thin liquid films dewetting near soft elastomeric layers Fulltext Access 14 Pages 2005
Multi-Monte Carlo method for coagulation and condensation/evaporation in dispersed systems Fulltext Access 14 Pages 2005
Passivation of the calcite surface with phenylmalonate and benzylmalonate ions Fulltext Access 14 Pages 2005
Modeling of adsorption dynamics at air-liquid interfaces using statistical rate theory (SRT) Fulltext Access 14 Pages 2005
Two-dimensional Monte Carlo simulations of a colloidal dispersion composed of polydisperse ferromagnetic particles in an applied magnetic field Fulltext Access 14 Pages 2005
Nonlinear stability analysis of a two-layer thin liquid film: Dewetting and autophobic behavior Fulltext Access 14 Pages 2005
Properties of two-component Langmuir monolayer of single chain perfluorinated carboxylic acids with dipalmitoylphosphatidylcholine (DPPC) Fulltext Access 14 Pages 2005
The use of bimodal blends of vinyl ester monomers to improve resin processing and toughen polymer properties Fulltext Access 14 Pages 2005
Polyelectrolyte-functionalized multiwalled carbon nanotubes: preparation, characterization and layer-by-layer self-assembly Fulltext Access 14 Pages 2005
Reorganization and improvement of bulk polymers by processing with their cyclodextrin inclusion compounds Fulltext Access 14 Pages 2005
Evolution of lamellar orientation and crystalline texture of various polyethylenes and ethylene-based copolymers in plane-strain compression Fulltext Access 14 Pages 2005
Computationally designed monomers and polymers for molecular imprinting of theophylline-part II Fulltext Access 14 Pages 2005
Mesoglobules of thermoresponsive polymers in dilute aqueous solutions above the LCST Fulltext Access 14 Pages 2005
Synthesis and characterization of temperature and pH-responsive pentablock copolymers Fulltext Access 14 Pages 2005
Design of novel poly(methyl vinyl ether) containing AB and ABC block copolymers by the dual initiator strategy Fulltext Access 14 Pages 2005
Effect of in situ prepared silica nano-particles on non-isothermal crystallization of polypropylene Fulltext Access 14 Pages 2005
Synthesis, thermal properties, and specific interactions of high Tg increase in poly(2,6-dimethyl-1,4-phenylene oxide)-block-polystyrene copolymers Fulltext Access 14 Pages 2005
Structure-property relations of poly(propylene oxide) block copolymers with monodisperse and polydisperse crystallisable segments Fulltext Access 14 Pages 2005
Rheological and mechanical comparative study of in situ polymerized and melt-blended nylon 6 nanocomposites Fulltext Access 14 Pages 2005
Influence of shear flow on the preparation of polymer layered silicate nanocomposites Fulltext Access 14 Pages 2005
Hydroxyl terminated poly(ether ether ketone) with pendent methyl group toughened epoxy resin: miscibility, morphology and mechanical properties Fulltext Access 14 Pages 2005
Synthesis of thermoplastic polyurethane nanocomposites of reactive nanoclay by bulk polymerization methods Fulltext Access 14 Pages 2005
A unified approach to conformational statistics of classical polymer and polypeptide models Fulltext Access 14 Pages 2005
Adhesion of CPO onto high modulus TPO: Lap-shear tests in conjunction with microscopy studies of the fracture surface structure Fulltext Access 14 Pages 2005
Rheological evaluation of the influence of polymer concentration and molar mass distribution on the formation and performance of asymmetric gas separation membranes prepared by dry phase inversion Fulltext Access 14 Pages 2005
Reaction induced phase separation in semicrystalline thermoplastic/epoxy resin blends Fulltext Access 14 Pages 2005
Characterization of interfacial mechanical properties in carbon fiber/aluminium matrix composites by the nanoindentation technique Fulltext Access 14 Pages 2005
Confined crystallization phenomena in immiscible polymer blends with dispersed micro - and nanometer sized PA6 droplets, part 1: uncompatibilized PS/PA6, (PPE/PS)/PA6 and PPE/PA6 blends Fulltext Access 14 Pages 2005
Application of density functional theory to equilibrium adsorption of argon and nitrogen on amorphous silica surface Fulltext Access 14 Pages 2005
Functional polymers: from plastic electronics to polymer-assisted therapeutics Fulltext Access 14 Pages 2005
Chromatographic fingerprinting - a tool for classification and for predicting the degradation state of degradable polyethylene Fulltext Access 14 Pages 2005
Physico-chemical aspects of polyethylene processing in an open mixer. Part 16: Mechanisms and kinetics of ketone formation at low temperature Fulltext Access 14 Pages 2005
Study of the synthesis of graft copolymers by a reactive process. Influence of the copolymer structure on the adhesion of polypropylene onto poly(vinylidene fluoride) Fulltext Access 14 Pages 2005
Reactive processing of polymers: Functionalisation of ethylene-propylene diene terpolymer (EPDM) in the presence and absence of a co-agent and effect of functionalised EPDM on compatibilisation of poly(ethylene terephthalate)/EPDM blends Fulltext Access 14 Pages 2005
Development of a unified framework for calculating molecular weight distribution in diffusion controlled free radical bulk homo-polymerization Fulltext Access 14 Pages 2005
Enthalpy relaxation studies in polymethyl methacrylate networks with different crosslinking degrees Fulltext Access 14 Pages 2005
Confined crystallization phenomena in immiscible polymer blends with dispersed micro- and nanometer sized PA6 droplets, part 2: reactively compatibilized PS/PA6 and (PPE/PS)/PA6 blends Fulltext Access 14 Pages 2005
Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites – A comparative study Fulltext Access 14 Pages 2005
Poly(ethylene oxide)/Laponite nanocomposites via melt-compounding: effect of clay modification and matrix molar mass Fulltext Access 14 Pages 2005
The influence of cure conditions on the morphology and phase distribution in a rubber-modified epoxy resin using scanning electron microscopy and atomic force microscopy Fulltext Access 14 Pages 2005
Adsorption of a weakly charged polymer on an oppositely charged colloidal particle: Monte Carlo simulations investigation Fulltext Access 14 Pages 2005
The effect of the polymerization route on the amount of interphase in structured latex particles and their corresponding films Fulltext Access 14 Pages 2005
A round robin study for the characterization of latex particle morphology-multiple analytical techniques to probe specific structural features Fulltext Access 14 Pages 2005
Reactively compatibilised polyamide6/ethylene-co-vinyl acetate blends: mechanical properties and morphology Fulltext Access 14 Pages 2005
Influence of copolymerisation on fracture behaviour of aliphatic polyketones Fulltext Access 14 Pages 2005
Stochastic simulation of thin photoresist film dissolution: a dynamic and a quasi-static dissolution algorithm for the simulation of surface and line-edge roughness formation Fulltext Access 14 Pages 2005
Thermodynamic, morphological, mechanical and fracture properties of poly(methyl methacrylate)(PMMA) modified divinylester(DVE)/styrene(St) thermosets Fulltext Access 14 Pages 2005
The atomistic simulation of the gas permeability of poly(organophosphazenes). Part 2. Poly[bis(2,2,2-trifluoroethoxy)phosphazene] Fulltext Access 14 Pages 2005
Methods to improve the properties of polymer mixtures: optimizing intermolecular interactions and compatibilization Fulltext Access 14 Pages 2005