Comparison of different microclimate effects on the aging behavior of encapsulation materials used in photovoltaic modules Fulltext Access 10 Pages 2017
Property ModellingSilicone gels - comparison by derivation of material model parameters Fulltext Access 10 Pages 2017
On the large strain deformation behavior of silicone-based elastomers for biomedical applications Fulltext Access 10 Pages 2017
Material PropertiesComparison on mechanical properties of lignocellulosic flour epoxy composites prepared by using coconut shell, rice husk and teakwood as fillers Fulltext Access 10 Pages 2017
Peroxide dynamic crosslinking in impact modification of polypropylene with polybutadiene Fulltext Access 10 Pages 2017
Effect of compatibilizig agent on the properties of polylactide and polylactide based composite during ozone exposure Fulltext Access 10 Pages 2017
Material PropertiesEffects of solar irradiation on the properties of ethylene-norbornene composites containing solvent dyes Fulltext Access 10 Pages 2017
Influence of machining process on the mechanical behaviour of injection-moulded specimens of talc-filled Polypropylene Fulltext Access 10 Pages 2017
Flame retardancy and thermal degradation of halogen-free flame-retardant biobased polyurethane composites based on ammonium polyphosphate and aluminium hypophosphite Fulltext Access 10 Pages 2017
Test MethodCharacterization of ductile damage in polyethylene plate using ultrasonic testing Fulltext Access 10 Pages 2017
Influence of structure on the properties of polypropylene copolymers and terpolymers Fulltext Access 10 Pages 2017
Elliptic crack behavior emanating from the cement mantle of the total hip prosthesis Fulltext Access 10 Pages 2017
Degradation of fluoroelastomers in rapeseed biodiesel at different oxygen concentrations Fulltext Access 10 Pages 2017
Tuning properties of poly(ethylene glycol)-block-poly(simvastatin) copolymers synthesized via triazabicyclodecene Fulltext Access 10 Pages 2017
Analysis of graphene-encapsulated polymer microcapsules with superior thermal and storage stability behavior Fulltext Access 10 Pages 2017
The effect of ionizing radiation on biocompatible polymers: From sterilization to radiolysis and hydrogel formation Fulltext Access 10 Pages 2017
Study on the thermal oxidative stabilization reactions and the formed structures in polyacrylonitrile during thermal treatment Fulltext Access 10 Pages 2017
Comparison of microwave and conventional heating methods in carbonization of polyacrylonitrile-based stabilized fibers at different temperature measured by an in-situ process temperature control ring Fulltext Access 10 Pages 2017
Synthesis of a novel charring agent containing pentaerythritol and triazine structure and its intumescent flame retardant performance for polypropylene Fulltext Access 10 Pages 2017
Modeling the ignition of poly(methyl methacrylate)/carbon nanotube nanocomposites Fulltext Access 10 Pages 2017
Carbon nanotubes stabilize poly(vinyl chloride) against thermal degradation Fulltext Access 10 Pages 2017
Hysteresis in the relation between moisture uptake and electrical conductivity in neat epoxy Fulltext Access 10 Pages 2017
Thermal properties of the multi-stereo block poly(lactic acid)s with various block lengths Fulltext Access 10 Pages 2017
Effect of the block length and the molecular weight on the isothermal crystallization behavior of multi-stereoblock poly(lactic-acid)s Fulltext Access 10 Pages 2017
Preparation and characterization of multilayered microcapsule-like microreactor for self-healing polymers Fulltext Access 10 Pages 2017
Criticality of self-heating in degradation processes of polymeric composites subjected to cyclic loading: A multiphysical approach Fulltext Access 10 Pages 2017
Fabrication of polydimethylsiloxane-derived superhydrophobic surface on aluminium via chemical vapour deposition technique for corrosion protection Fulltext Access 10 Pages 2017
Evaluation of multiple stress corrosion crack interactions by in-situ Digital Image Correlation Fulltext Access 10 Pages 2017
Fabrication of non-wetting surfaces on zinc surface as corrosion barrier Fulltext Access 10 Pages 2017
Effects of flow, Si inhibition, and concurrent corrosion of dissimilar metals on the corrosion of aluminium in the environment following a loss-of-coolant accident Fulltext Access 10 Pages 2017
Role of previously formed corrosion product layers on sulfide-assisted corrosion of iron archaeological artefacts in soil Fulltext Access 10 Pages 2017
Estimation of operational parameters of the counter-rotating wind turbine with artificial neural networks Fulltext Access 10 Pages 2017
Analysis of sliding mechanism of straight steel fibers in concrete and determine the effect of friction Fulltext Access 10 Pages 2017
Propagation of a thermoelastic wave in a half-space of a homogeneous isotropic material subjected to the effect of gravity field Fulltext Access 10 Pages 2017
High dimensional model representation for reliability analyses of complex rock-soil slope stability Fulltext Access 10 Pages 2017
Assessment of collapse diagrams of rigid polyurethane foams under dynamic loading conditions Fulltext Access 10 Pages 2017
Effect of peptide self-assembly on the rheological properties of alginate-peptide conjugates solutions Fulltext Access 10 Pages 2017
Effects of upstream terrain characteristics on aerodynamic coefficients of structures Fulltext Access 10 Pages 2017
The corrosion behavior and mechanism of carbon steel induced by extracellular polymeric substances of iron-oxidizing bacteria Fulltext Access 10 Pages 2017
Pitting corrosion of sensitised type 304 stainless steel under wet-dry cycling condition Fulltext Access 10 Pages 2017
Electrochemical investigation and ab initio computation of passive film properties on copper in anaerobic sulphide solutions Fulltext Access 10 Pages 2017
Effects of bubbles on high-temperature corrosion of helium ion-irradiated Ni-based alloy in fluoride molten salt Fulltext Access 10 Pages 2017
Real time, in-situ deuteriding of uranium encapsulated in grout; effects of temperature on the uranium-deuterium reaction Fulltext Access 10 Pages 2017
The major influence of the substrate nature on the formation of nanotubes with high water adhesion using a templateless electropolymerization process Fulltext Access 10 Pages 2017
Corrosion resistance and antibacterial activity of electrosynthesized polypyrrole Fulltext Access 10 Pages 2017
Electron beam modified zinc phthalocyanine thin films for radiation dosimeter application Fulltext Access 10 Pages 2017
Conductive thin films based on poly (aniline-co-o-anthranilic acid)/magnetite nanocomposite for photovoltaic applications Fulltext Access 10 Pages 2017
Polysucrose-based hydrogels for loading of small molecules and cell growth Fulltext Access 10 Pages 2017
Interfacial polymerization of cyanuric chloride and monomeric amines: pH resistant thin film composite polyamine nanofiltration membranes Fulltext Access 10 Pages 2017
Adhesion of continuously manufactured fusion bonded multi-material structures consisting of steel and carbon fibre reinforced Polyamide 6 Fulltext Access 10 Pages 2017
Effect of interface profile and incident wave characteristics on aluminum/epoxy dynamic adhesion strength Fulltext Access 10 Pages 2017
Physical aging of glassy perfluoropolymers in thin film composite membranes. Part II. Glass transition temperature and the free volume model Fulltext Access 10 Pages 2017
Effect of calcium ions on fouling properties of alginate solution and its mechanisms Fulltext Access 10 Pages 2017
Enhanced physical stability and chemical durability of sulfonated poly(arylene ether sulfone) composite membranes having antioxidant grafted graphene oxide for polymer electrolyte membrane fuel cell applications Fulltext Access 10 Pages 2017
The effect of permeate flux on membrane fouling during microfiltration of oily water Fulltext Access 10 Pages 2017
Influence of backwashing on the pore size of hollow fiber ultrafiltration membranes Fulltext Access 10 Pages 2017
Arabic gum as a novel pore-forming and hydrophilic agent in polysulfone membranes Fulltext Access 10 Pages 2017
Self-cleaning anti-fouling hybrid ultrafiltration membranes via side chain grafting of poly(aryl ether sulfone) and titanium dioxide Fulltext Access 10 Pages 2017
Three-dimensional reconstruction of bioactive membranes and pore-scale simulation of enzymatic reactions: The case of lactose hydrolysis Fulltext Access 10 Pages 2017
X-ray tomography-assisted study of a phase inversion process in ceramic hollow fiber systems - Towards practical structural design Fulltext Access 10 Pages 2017
A novel natural hirudin facilitated anti-clotting polylactide membrane via hydrogen bonding interaction Fulltext Access 10 Pages 2017
Displacement rate and structural effects on Poisson ratio of a ductile structural adhesive in tension and compression Fulltext Access 10 Pages 2017
Synthesis of thin film composite polyamide membranes: Effect of monohydric and polyhydric alcohol additives in aqueous solution Fulltext Access 10 Pages 2017
Novel hybrid process for bio-butanol recovery: Thermopervaporation with porous condenser assisted by phase separation Fulltext Access 10 Pages 2017
Effects of non-planar hydrophobic cyclohexylidene moiety on the structure and stability of poly(arylene ether sulfone)s based anion exchange membranes Fulltext Access 10 Pages 2017
Investigation of cake fouling and pore blocking phenomena using fluid dynamic gauging and critical flux models Fulltext Access 10 Pages 2017
An automated lab-scale flue gas permeation membrane testing system at the National Carbon Capture Center Fulltext Access 10 Pages 2017
Solvent resistant nanofiltration for acetonitrile based feeds: A membrane screening Fulltext Access 10 Pages 2017
Effect of intermittent ultrasound on controlling membrane fouling with coagulation pre-treatment: Significance of the nature of adsorbed organic matter Fulltext Access 10 Pages 2017
The porous media's effect on the permeation of elastic (soft) particles Fulltext Access 10 Pages 2017
Preparation of cyclic peptide nanotube structures and molecular simulation of water adsorption and diffusion Fulltext Access 10 Pages 2017
Highly porous carbon nanotube/polysulfone nanocomposite supports for high-flux polyamide reverse osmosis membranes Fulltext Access 10 Pages 2017
The influences of a novel shear layer-spherulites layer alternated structure on the mechanical properties of injection-molded isotactic polypropylene Fulltext Access 10 Pages 2017
Fiber-spun polypropylene/polyethylene terephthalate microfibrillar composites with enhanced tensile and rheological properties and foaming ability Fulltext Access 10 Pages 2017
Topology driven structural transition of dendrimers with a dimensional cross-over Fulltext Access 10 Pages 2017
Microphase separation and crystallization behaviors of bi-phased triblock terpolymers with a competitively dissolved middle block Fulltext Access 10 Pages 2017
Development of structure-property relationships that allow independent control of glass transition temperature, melting temperature, and rheology in a library of bio-based succinate polyester polyols Fulltext Access 10 Pages 2017
Multi-lobed composite polymer nanoparticles prepared by conventional emulsion polymerization Fulltext Access 10 Pages 2017
Nitroxide radical-containing nanoparticles as potential candidates for overcoming drug resistance in epidermoid cancers Fulltext Access 10 Pages 2017
Heat-induced bubble expansion as a route to increase the porosity of foam-templated bio-based macroporous polymers Fulltext Access 10 Pages 2017
All-solid-state lithium metal battery with solid polymer electrolytes based on polysiloxane crosslinked by modified natural gallic acid Fulltext Access 10 Pages 2017
Improved mechanical properties through engineering the interface by poly (ether ether ketone) grafted graphene oxide in epoxy based nanocomposites Fulltext Access 10 Pages 2017
Predicting performance of constant flow depth filtration using constant pressure filtration data Fulltext Access 10 Pages 2017
Surface texturing of electrospun fibres by photoembossing using pulsed laser interference holography and its effects on endothelial cell adhesion Fulltext Access 10 Pages 2017
Physical gelation of supramolecular hydrogels cross-linked by metal-ligand interactions: Dynamic light scattering and microrheological studies Fulltext Access 10 Pages 2017
High performance poly (lactic acid)/bio-polyamide11 through controlled chain mobility Fulltext Access 10 Pages 2017
Effect of the polymer-substrate interactions on crystal nucleation of polymers grafted on a flat solid substrate as studied by molecular simulations Fulltext Access 10 Pages 2017
Double-stranded block copolymer with dual-polarized linker for improving dielectric and electrical energy storage performance Fulltext Access 10 Pages 2017
Phosphorus additives for improving high voltage stability and safety of lithium ion batteries Fulltext Access 10 Pages 2017
The preparation of surface fluorinated polyethylene films with excellent properties similar to that of fluoropolymers Fulltext Access 10 Pages 2017
Susceptor-assisted induction curing behaviour of a two component epoxy paste adhesive for aerospace applications Fulltext Access 10 Pages 2017
Creep performance of glued-in rod joints in controlled and variable climate conditions Fulltext Access 10 Pages 2017
Numerical design and multi-objective optimisation of novel adhesively bonded joints employing interlocking surface morphology Fulltext Access 10 Pages 2017