Application of Scanning Capacitance Microscopy on SOI device with wafer edge low yield pattern

In this paper, scanning capacitance is successfully used as the substitution of the PVC method. The SCM (Scanning Capacitance Microscopy) is a complicated process. Since all of the abnormality or physical change will affect the measured capacitance, then the capacitance signal will theoretically has many information with itself, including open, short and leakage. Through the detailed study, the contact level top-down SCM was successfully applied on the SOI unit. By proper setting of SCM bias condition, it can not only visualize the possible leaky location but also can reveal the possible path. Further nanoprobing and TEM (Transmission Electron Microscopy) have confirmed the SCM analysis.