Austenitic plasma nitrocarburising of carbon steel in N2–H2 atmosphere with organic vapour additions Fulltext Access 9 Pages 2006
Ultraviolet emitting (Y1−xGdx)2O3−δ thin films deposited by radio frequency magnetron sputtering: Combinatorial modeling, synthesis, and rapid characterization Fulltext Access 9 Pages 2006
Effect of preparation conditions on properties of atomic layer deposited TiO2 films in Mo–TiO2–Al stacks Fulltext Access 9 Pages 2006
DC magnetron reactive sputtered InN thin film electrodes as photoanodes in aqueous solution. A study of as prepared and nitrogen annealed electrodes Fulltext Access 9 Pages 2006
Commercial and laboratory prepared titanium dioxide thin films for self-cleaning glasses: Photocatalytic performance and chemical durability Fulltext Access 9 Pages 2006
Preferred orientations in polycrystalline SnO2 films grown by atmospheric pressure chemical vapor deposition Fulltext Access 9 Pages 2006
Fabrication and characterisation of crystalline silicon thin-film materials for solar cells Fulltext Access 9 Pages 2006
Formation of detonation coatings based on titanium aluminide alloys and aluminium titanate ceramic sprayed from mechanically alloyed powders Ti—Al Fulltext Access 9 Pages 2006
Cavitation erosion and corrosion behaviors of laser-aluminized mild steel Fulltext Access 9 Pages 2006
Deformation and fracture of TiN and TiAlN coatings on a steel substrate during nanoindentation Fulltext Access 9 Pages 2006
The influence of machining induced residual stress and phase transformation on the measurement of subsurface mechanical behavior using nanoindentation Fulltext Access 9 Pages 2006
Microstructure, wear and high-temperature oxidation resistance of laser clad Ti5Si3/γ/TiSi composite coatings on γ-TiAl intermetallic alloy Fulltext Access 9 Pages 2006
Effect of nitrogen addition on the properties and thermal stability of fluorinated amorphous carbon films Fulltext Access 9 Pages 2006
Assessment of microstructural and mechanical properties of HVOF sprayed WC-based cermet coatings for a roller cylinder Fulltext Access 9 Pages 2006
Heat treatment of nanocrystalline TiN films deposited by unbalanced magnetron sputtering Fulltext Access 9 Pages 2006
Electrostatic fluidized bed deposition of a high performance polymeric powder on metallic substrates Fulltext Access 9 Pages 2006
Influence of the polymer pre-treatment before its electroless metallization Fulltext Access 9 Pages 2006
Microstructure development in Cr–Al–Si–N nanocomposites deposited by cathodic arc evaporation Fulltext Access 9 Pages 2006
Study of the initial stage of electroless Ni deposition on Si (100) substrates in aqueous alkaline solution Fulltext Access 9 Pages 2006
Life time dependency on the pre-coating treatment of a thermal barrier coating under thermal cycling Fulltext Access 9 Pages 2006
Arc plasma nitriding of graphite surface towards production of a hard carbon nitride case Fulltext Access 9 Pages 2006
Preparation and characterization of Cr–P coatings by electrodeposition from trivalent chromium electrolytes using malonic acid as complex Fulltext Access 9 Pages 2006
Deposition and characterization of alumina films produced by combustion flame pyrolysis Fulltext Access 9 Pages 2006
Cu electrodeposition on Ru(0001): Perchlorate dissociation and its effects on Cu deposition Fulltext Access 9 Pages 2006
Multifunctional photochromic spiropyran dendrimers and their relaxation behaviors of photochromism Fulltext Access 9 Pages 2006
Effect of close packing of octadecyltriethoxysilane molecules on monolayer morphology at the air/water interface Fulltext Access 9 Pages 2006
Surface composition gradients of immobilized cell signaling molecules. Epidermal growth factor on gold Fulltext Access 9 Pages 2006
Non-destructive X-ray study of the interphases in Mo/Si and Mo/B4C/Si/B4C multilayers Fulltext Access 9 Pages 2006
High coloration performance of electrochromic devices assembled with electrolytes based on a branched boronate ester polymer and lithium perchlorate salt Fulltext Access 9 Pages 2006
Sliding friction and wear property of a-C and a-CNx coatings against SiC balls in water Fulltext Access 9 Pages 2006
Ordering and dewetting in spin-coated films of a liquid crystalline main chain polymer Fulltext Access 9 Pages 2006
Electronic and geometric structure of electro-optically active organic films and associated interfaces Fulltext Access 9 Pages 2006
Multi-technique characterization of tantalum oxynitride films prepared by reactive direct current magnetron sputtering Fulltext Access 9 Pages 2006
Electrochemical quartz crystal microbalance study on growth and property of the polymer deposit at gold electrodes during oxidation of dopamine in aqueous solutions Fulltext Access 9 Pages 2006
Modeling of thermal residual stresses in multilayer coatings with graded properties and compositions Fulltext Access 9 Pages 2006
Thermodynamical analysis of Al and Si halide gaseous precursors in CVD. Review and approximation for deposition at moderate temperature in FBR-CVD process Fulltext Access 9 Pages 2006
Determination of the doping concentration profile in Si δ-doped GaAs layers using micro-Raman spectroscopy of bevelled structures Fulltext Access 9 Pages 2006
Branched chain glycosides: Enhanced diversity for phase behavior of easily accessible synthetic glycolipids Fulltext Access 9 Pages 2006
Electron transport properties of helical peptide dithiol at a molecular level: Scanning tunneling microscope study Fulltext Access 9 Pages 2006
Stability and effect of annealing on the optical properties of plasma-deposited Ta2O5 and Nb2O5 films Fulltext Access 9 Pages 2006
Growth and microstructures of carbon nanotube films prepared by microwave plasma enhanced chemical vapor deposition process Fulltext Access 9 Pages 2006
Characterization and photocatalytic activity of nanostructured indium tin oxide thin-film electrode for azo-dye degradation Fulltext Access 9 Pages 2006
Mechanical properties determined by nanoindentation tests of [Pb(Zr,Ti)O3] and [Pb(Mg1/3Nb2/3)1−xTixO3] sputtered thin films Fulltext Access 9 Pages 2006
Epitaxial growth of CoSi2 on Si(001) by reactive deposition epitaxy: Island growth and coalescence Fulltext Access 9 Pages 2006
Crown ether-metal “sandwiches” as linking mechanisms in assembled nanoparticle films Fulltext Access 9 Pages 2006
Residual stress development in Pb(Zr,Ti)O3/ZrO2/SiO2 stacks for piezoelectric microactuators Fulltext Access 9 Pages 2006
Influence of plasma nitriding and PAPVD Cr1 â xNx coating on the cavitation erosion resistance of an AISI 1045 steel Fulltext Access 9 Pages 2006
Experimental study of titanium/aluminium deposits produced by cold gas dynamic spray Fulltext Access 9 Pages 2006
Experimental bending tests and numerical approach to determine the fracture mechanical properties of thin ceramic coatings deposited by magnetron sputtering Fulltext Access 9 Pages 2006
Mechanical properties and temperature dependence of an air plasma-sprayed NiCoCrAlY bondcoat Fulltext Access 9 Pages 2006
Numerical investigation on laser transformation hardening with different temporal pulse shapes Fulltext Access 9 Pages 2006
Reactive gas shielding during laser surface alloying for production of hard coatings Fulltext Access 9 Pages 2006
Surface modification of Ti implants by plasma oxidation in hollow cathode discharge Fulltext Access 9 Pages 2006
The effect of coating thickness on the thermal conductivity of EB-PVD PYSZ thermal barrier coatings Fulltext Access 9 Pages 2006
On the correlation between Nd:YAG laser-induced wettability characteristics modification and osteoblast cell bioactivity on a titanium alloy Fulltext Access 9 Pages 2006
Formation of poly(o-anisidine) coatings on copper from aqueous salicylate solution Fulltext Access 9 Pages 2006
Glow discharge nitriding of AISI 316L austenitic stainless steel: Influence of treatment pressure Fulltext Access 9 Pages 2006
Copper metallization of polymers by a palladium-free electroless process Fulltext Access 9 Pages 2006
The role of HVOF coatings in improving hot corrosion resistance of ASTM-SA210 GrA1 steel in the presence of Na2SO4-V2O5 salt deposits Fulltext Access 9 Pages 2006
Laser surface modification and characterization of air plasma sprayed alumina coatings Fulltext Access 9 Pages 2006
Modification of high-speed steels by nitrogen compression plasma flow: Structure, element composition, tribological properties Fulltext Access 9 Pages 2006
Construction and analysis of C-H-N phase diagram for diamond chemical vapor deposition by simulation of gas-phase chemistry Fulltext Access 9 Pages 2006
Coating internal stress measurement through the curvature method: A geometry-based criterion delimiting the relevance of Stoney's formula Fulltext Access 9 Pages 2006
Enhancement of adhesion strength between two AISI 316 L stainless steel plates through atmospheric pressure plasma treatment Fulltext Access 9 Pages 2006
Effects of kerosene or distilled water as dielectric on electrical discharge alloying of superalloy Haynes 230 with Al–Mo composite electrode Fulltext Access 9 Pages 2006
Production and characterization of electrolytic nickel–niobium composite coatings Fulltext Access 9 Pages 2006
Residual stress control in TiN/Si coatings deposited by unbalanced magnetron sputtering Fulltext Access 9 Pages 2006
Influence of particle size on the microstructure, hardness and corrosion resistance of electroless Ni–P–Al2O3 composite coatings Fulltext Access 9 Pages 2006
Influence of N, Ar and Si ion implantation on the passive layer and corrosion behaviour of AISI 304 and 430 stainless steels Fulltext Access 9 Pages 2006
Modelling of grazing incidence X-ray diffraction spectra from Mo-implanted stainless steel: Comparison with experimental data Fulltext Access 9 Pages 2006
TiSiN nanocomposite coatings by chemical vapor deposition in a fluidized bed reactor at atmospheric pressure (AP/FBR-CVD) Fulltext Access 9 Pages 2006
A quantitative analysis of the effect of laser transformation hardening on crack driving force in steels Fulltext Access 9 Pages 2006
A comparative study of reactive direct current magnetron sputtered CrAlN and CrN coatings Fulltext Access 9 Pages 2006
Features of intermetallic compounds in aluminized steels formed using aluminum foil Fulltext Access 9 Pages 2006
Influence of spraying parameters on the electrochemical behaviour of HVOF thermally sprayed stainless steel coatings in 3.4% NaCl Fulltext Access 9 Pages 2006
Morphological and microstructural characterization of laser-glazed plasma-sprayed thermal barrier coatings Fulltext Access 9 Pages 2006
Development of a hybrid coating process for deposition of diamond-like carbon films on microdrills Fulltext Access 9 Pages 2006
Abrasive wear behaviour of laser clad and flame sprayed-melted NiCrBSi coatings Fulltext Access 9 Pages 2006
Evaluation of laser-glazed plasma-sprayed thermal barrier coatings under high temperature exposure to molten salts Fulltext Access 9 Pages 2006
Microstructural characterization and abrasive wear performance of HVOF sprayed Cr3C2–NiCr coating Fulltext Access 9 Pages 2006
Ni direct electroless metallization of polymers by a new palladium-free process Fulltext Access 9 Pages 2006
Deformation and failure mechanism of nano-composite coatings under nano-indentation Fulltext Access 9 Pages 2006
Nanostructured and conventional YSZ coatings deposited using APS and TTPR techniques Fulltext Access 9 Pages 2006
Superhard nanocomposite coatings of TiN/Si3N4 prepared by reactive direct current unbalanced magnetron sputtering Fulltext Access 9 Pages 2006
Adhesion performance of black oxide coated copper substrates: Effects of moisture sensitivity test Fulltext Access 9 Pages 2006
Studies of the metallurgical and mechanical properties of high velocity oxy-fuel sprayed stellite-6 coatings on Ni- and Fe-based superalloys Fulltext Access 9 Pages 2006
Preparation and performance of novel MEA with multi catalyst layer structure for PEFC by magnetron sputter deposition technique Fulltext Access 9 Pages 2006
Application of thermal oxidation to the development of PM 2000 as potential biomaterial for medical devices Fulltext Access 9 Pages 2006
Analysis of the co-deposition of CrAlYTa particles with nickel by an electrolytic–electroless route: The influence of solution and hydrodynamic parameters Fulltext Access 9 Pages 2006
Growth of thin aluminium oxide films on stainless steel by MOCVD at ambient pressure and by using a hot-wall CVD-setup Fulltext Access 9 Pages 2006
Electrodeposition of aluminium from ionic liquids: Part II - studies on the electrodeposition of aluminum from aluminum chloride (AICl3) - trimethylphenylammonium chloride (TMPAC) ionic liquids Fulltext Access 9 Pages 2006
Electrodeposition of aluminium from ionic liquids: Part I-electrodeposition and surface morphology of aluminium from aluminium chloride (AlCl3)-1-ethyl-3-methylimidazolium chloride ([EMIm]Cl) ionic liquids Fulltext Access 9 Pages 2006