Analysis of dynamic mechanical behavior in reverse Taylor anvil-on-rod impact tests Fulltext Access 14 Pages 2007
A comparative study of energy absorption characteristics of foam-filled and multi-cell square columns Fulltext Access 14 Pages 2007
Calculation of transient strain energy release rates under impact loading based on the virtual crack closure technique Fulltext Access 14 Pages 2007
Electromechanical impact of an impermeable parallel crack in a functionally graded piezoelectric strip Fulltext Access 14 Pages 2007
Strain simulation of steel during a heating-cooling cycle including solid-solid phase change Fulltext Access 14 Pages 2007
Cathodic delamination of elastomer-to-metal adhesive joints: Experimental data and empirical modeling Fulltext Access 14 Pages 2007
A study on nanostructured laminated plates behavior under low-velocity impact loadings Fulltext Access 14 Pages 2007
Mixed numerical–experimental technique for orthotropic parameter identification using biaxial tensile tests on cruciform specimens Fulltext Access 14 Pages 2007
A state space approach for exact analysis of composite laminates and functionally graded materials Fulltext Access 14 Pages 2007
Viscoelastic analysis of rectangular passage of microchanneled plates subjected to internal pressure Fulltext Access 14 Pages 2007
The uniaxial tension of particulate composite materials with nonlinear interface debonding Fulltext Access 14 Pages 2007
Perturbation analysis of an undulating free surface in a multi-layered structure Fulltext Access 14 Pages 2007
An approach to solving mechanics problems for materials with multiscale self-similar microstructure Fulltext Access 14 Pages 2007
High-speed photography of compressed human trabecular bone correlates whitening to microscopic damage Fulltext Access 14 Pages 2007
The mechanical behaviour of weak mudstone (Opalinus Clay) at low stresses Fulltext Access 14 Pages 2007
Numerical modelling of dynamically loaded metal foam-filled square columns Fulltext Access 14 Pages 2007
A general elastic–plastic approach to impact analisys for stress state limit evaluation in ball screw bearings return system Fulltext Access 14 Pages 2007
An efficient approach for identifying impact force using embedded piezoelectric sensors Fulltext Access 14 Pages 2007
A methodology for evaluating the controllability of a ship navigating in a restricted channel Fulltext Access 14 Pages 2007
Three-dimensional vibration, buckling and bending analyses of thick rectangular plates based on discrete singular convolution method Fulltext Access 14 Pages 2007
Modeling of fretting wear evolution in rough circular contacts in partial slip Fulltext Access 14 Pages 2007
Characterization of the contact between a punch and a half-infinite substrate in a fretting situation Fulltext Access 14 Pages 2007
Modelling the environmental degradation of adhesively bonded aluminium and composite joints using a CZM approach Fulltext Access 14 Pages 2007
Drop test simulation and power spectrum analysis of a head actuator assembly in a hard disk drive Fulltext Access 14 Pages 2007
GA based meta-modeling of BPN architecture for constrained approximate optimization Fulltext Access 14 Pages 2007
An investigation of grain size and nitrogen-doping effects on the mechanical properties of ultrananocrystalline diamond films Fulltext Access 14 Pages 2007
Numerical simulations of 3D open cell structures – influence of structural irregularities on elasto-plasticity and deformation localization Fulltext Access 14 Pages 2007
Steady state responses of poroelastic half-space soil medium to a moving rectangular load Fulltext Access 14 Pages 2007
Analyzing the 2D fracture problems via the enriched boundary element-free method Fulltext Access 14 Pages 2007
Uniformly moving screw dislocation interacting with interface cracks in anisotropic bimaterials Fulltext Access 14 Pages 2007
An asymptotically correct model for initially curved and twisted thin-walled composite beams Fulltext Access 14 Pages 2007
Singularities of homogeneous deformations of constrained hyper-elastic materials Fulltext Access 14 Pages 2007
The out-of-plane constraint of mixed-mode cracks in thin elastic plates Fulltext Access 14 Pages 2007
Bearing materials obtained by diffusion bonding of aluminium and aluminium bronze chips Fulltext Access 14 Pages 2007
Reflection of plane waves from an elastic solid half-space under hydrostatic initial stress without energy dissipation Fulltext Access 14 Pages 2007
Prediction of fatigue life improvement in natural rubber using configurational stress Fulltext Access 14 Pages 2007
A study on the determination of plastic properties of metals by instrumented indentation using two sharp indenters Fulltext Access 15 Pages 2007
Experimental investigation into behaviour of CFRP composite-strengthened RC beam under cyclic loading Fulltext Access 15 Pages 2007
A conventional theory of strain gradient crystal plasticity based on the Taylor dislocation model Fulltext Access 15 Pages 2007
Use of local and global limit load solutions for plates with surface cracks under tension Fulltext Access 15 Pages 2007
Shock enhancement of cellular structures under impact loading: Part II analysis Fulltext Access 15 Pages 2007
Applications of exact causality relationships to materials dynamic analysis Fulltext Access 15 Pages 2007
Cone indentation of time-dependent materials: The effects of the indentation strain rate Fulltext Access 15 Pages 2007
Bio-inspired mechanics of reversible adhesion: Orientation-dependent adhesion strength for non-slipping adhesive contact with transversely isotropic elastic materials Fulltext Access 15 Pages 2007
Yield stress strengthening in ultrafine-grained metals: A two-dimensional simulation of dislocation dynamics Fulltext Access 15 Pages 2007
Anti-plane shear crack normal to and terminating at the interface of two bonded piezoelectric ceramics Fulltext Access 15 Pages 2007
A generic method for modeling the behavior of anisotropic metallic materials: Application to recrystallized zirconium alloys Fulltext Access 15 Pages 2007
Neck retardation and enhanced energy absorption in metal–elastomer bilayers Fulltext Access 15 Pages 2007
Random property of micro/macro fatigue crack growth behavior predicted from energy density amplitude range Fulltext Access 15 Pages 2007
Transient response of multiple intersecting spheres of deep-submerged pressure hull subjected to underwater explosion Fulltext Access 15 Pages 2007
Fatigue crack growth rate behavior of polyvinylchloride hidden by scaling: Reinterpreted by micro/macrocrack model Fulltext Access 15 Pages 2007
Large earthquakes during hydraulic stimulations at the geothermal site of Soultz-sous-Forêts Fulltext Access 15 Pages 2007
The relationship between closure pressures from fluid injection tests and the minimum principal stress in strong rocks Fulltext Access 15 Pages 2007
FLAC/PFC coupled numerical simulation of AE in large-scale underground excavations Fulltext Access 15 Pages 2007
The high strain mechanical response of the wet Kelvin model for open-cell foams Fulltext Access 15 Pages 2007
Nonlinear electro- and magneto-elastostatics: Material and spatial settings Fulltext Access 15 Pages 2007
Localized interaction models with non-constant friction for rigid penetrating impactors Fulltext Access 15 Pages 2007
Full-field characterization of mechanical behavior of polyurethane foams Fulltext Access 15 Pages 2007
Analysis of the failure mode and softening behaviour of sands in true triaxial tests Fulltext Access 15 Pages 2007
Shape design sensitivity analysis for stability of elastic continuum structures Fulltext Access 15 Pages 2007
Shell element based model for wave propagation analysis in multi-wall carbon nanotubes Fulltext Access 15 Pages 2007
Full field methods and residual stress analysis in orthotropic material. II: Nonlinear approach Fulltext Access 15 Pages 2007
Asymptotic analysis of transient curved crack in functionally graded materials Fulltext Access 15 Pages 2007
Simulation of rate dependent plasticity for polymers with asymmetric effects Fulltext Access 15 Pages 2007
The effect of rotation on generalized micropolar thermoelasticity for a half-space under five theories Fulltext Access 15 Pages 2007
A piezoelectric screw dislocation interacting with an imperfect piezoelectric bimaterial interface Fulltext Access 15 Pages 2007
A new BEM formulation for transient axisymmetric poroelasticity via particular integrals Fulltext Access 15 Pages 2007
Fully implicit formulation of elastoplastic homogenization problem for two-scale analysis Fulltext Access 15 Pages 2007
A micromechanical model for predicting the fracture toughness of functionally graded foams Fulltext Access 15 Pages 2007
Two-dimensional fractal-like finite element method for thermoelastic crack analysis Fulltext Access 15 Pages 2007
Delamination mechanism maps for a strong elastic coating on an elastic–plastic substrate subjected to contact loading Fulltext Access 15 Pages 2007
Axisymmetric nuclei of strain and their applications for multilayered solids Fulltext Access 15 Pages 2007
Multi-objective optimization of the sandwich panels with prismatic cores using genetic algorithms Fulltext Access 15 Pages 2007