Morphology and mechanical properties of polyamide 12/polypropylene blends in presence and absence of reactive compatibiliser Fulltext Access 15 Pages 2006
Monomer addition programs to generate constant gradient block copolymers Fulltext Access 15 Pages 2006
A model of charge transport and electromechanical transduction in ionic liquid-swollen Nafion membranes Fulltext Access 15 Pages 2006
Morphological alteration and strength of polyamide 6 subjected to high plane-strain compression Fulltext Access 15 Pages 2006
Comparison of fracture behavior of nylon 6 versus an amorphous polyamide toughened with maleated poly(ethylene-1-octene) elastomers Fulltext Access 15 Pages 2006
Polyisobutene/polystyrene interpenetrating polymer networks: Effects of network formation order and composition on the IPN architecture Fulltext Access 15 Pages 2006
Microstructural features, diffusion and molecular relaxations in polyimide/silica hybrids Fulltext Access 15 Pages 2006
Blown films of nanocomposites prepared from low density polyethylene and a sodium ionomer of poly(ethylene-co-methacrylic acid) Fulltext Access 15 Pages 2006
Elastomer particle morphology in ternary blends of maleated and non-maleated ethylene-based elastomers with polyamides: Role of elastomer phase miscibility Fulltext Access 15 Pages 2006
An efficient stereoselective preparation of cis-perfluoroalkenylzinc reagents [(E)-RFCFCFZnCl] by the metallation of 1H,1H-perfluoroalkanes and their derivatization to cis-1-arylperfluoroalkenes [(Z)-RFCFCFAr] Fulltext Access 15 Pages 2006
Preparation of interconnected poly(ε-caprolactone) porous scaffolds by a combination of polymer and salt particulate leaching Fulltext Access 15 Pages 2006
Physico-chemical aspects of polyethylene processing in an open mixer. Part 17. Effect of oxygen availability Fulltext Access 15 Pages 2006
Review ArticleStandardization and certification in the area of environmentally degradable plastics Fulltext Access 15 Pages 2006
Thermal stability and degradation behavior of novel wholly aromatic azopolyamide-hydrazides Fulltext Access 15 Pages 2006
Entropically driven ring-opening metathesis polymerization (ED-ROMP) of macrocyclic olefin-containing oligoamides Fulltext Access 15 Pages 2006
Spatial resolution of degradation in stabilized polystyrene and polypropylene plaques exposed to accelerated photodegradation or heat aging Fulltext Access 15 Pages 2006
Facile synthesis of branched water-soluble poly(dimethylacrylamide)s in conventional and parallel reactors using free radical polymerisation Fulltext Access 15 Pages 2006
Preparation, physico-chemical characterization, analytical applications and electrical conductivity measurement studies of an 'organic-inorganic' composite cation-exchanger: Polyaniline Sn(IV) phosphate Fulltext Access 15 Pages 2006
Morphology and mechanical properties of chitosan fibers obtained by gel-spinning: Influence of the dry-jet-stretching step and ageing Fulltext Access 16 Pages 2006
Synthesis, characterization and liquid-crystal-aligning properties of novel aromatic polypyromellitimides bearing (n-alkyloxy)biphenyloxy side chains Fulltext Access 16 Pages 2006
Molecular changes on drawing isotopic blends of polyethylene and ethylene copolymers. Part 2. MCIRS studies Fulltext Access 16 Pages 2006
Softening and melting mechanisms of polyamides interfering with sliding stability under adhesive conditions Fulltext Access 16 Pages 2006
A structure-based constitutive equation for filler-reinforced rubber-like networks and for the description of the Mullins effect Fulltext Access 16 Pages 2006
Gas permeation in poly(ether imide) nanocomposite membranes based on surface-treated silica. Part 1: Without chemical coupling to matrix Fulltext Access 16 Pages 2006
Quantitative kinetic analysis of gene expression during human osteoblastic adhesion on orthopaedic materials Fulltext Access 16 Pages 2006
Adsorption and desorption kinetics for hydrophilic and hydrophobic vapors on activated carbon Fulltext Access 16 Pages 2006
Cluster analysis and gene expression profiles: A cDNA microarray system-based comparison between human dental pulp stem cells (hDPSCs) and human mesenchymal stem cells (hMSCs) for tissue engineering cell therapy Fulltext Access 16 Pages 2006
A low symmetry structure of isotactic poly(4-methyl-pentene-1), Form II. An illustration of the impact of chain folding on polymer crystal structure and unit-cell symmetry Fulltext Access 16 Pages 2006
Metal-containing polyurethanes, poly(urethane-urea)s and poly(urethane-ether)s: A review Fulltext Access 16 Pages 2006
Novel carbazole phenoxy-based methacrylates to produce high-refractive index polymers Fulltext Access 16 Pages 2006
Impact of different spacer filaments geometries on 2D unsteady hydrodynamics and concentration polarization in spiral wound membrane channel Fulltext Access 16 Pages 2006
Product PerformanceDeformation of reinforced polymer bearing elements on full-scale compressive strength and creep tests under yielding conditions Fulltext Access 16 Pages 2006
Condition monitoring methods applied to degradation of chlorosulfonated polyethylene cable jacketing materials Fulltext Access 16 Pages 2006
Formation and characterization of asymmetric nanofiltration membrane: Effect of shear rate and polymer concentration Fulltext Access 16 Pages 2006
Soluble osteogenic molecular signals and the induction of bone formation Fulltext Access 16 Pages 2006
The very strong solid Lewis acids aluminium chlorofluoride (ACF) and bromofluoride (ABF)—Synthesis, structure, and Lewis acidity Fulltext Access 16 Pages 2006
Extremely facile ring inversion and rearrangement in fluorobicyclo[2.1.0]pentanes Fulltext Access 16 Pages 2006
A comparison of mineral affinity of bisphosphonate–protein conjugates constructed with disulfide and thioether linkages Fulltext Access 16 Pages 2006
Heck-type 5-endo-trig cyclizations promoted by vinylic fluorines: Ring-fluorinated indene and 3H-pyrrole syntheses from 1,1-difluoro-1-alkenes Fulltext Access 16 Pages 2006
Influence of composition and annealing on the structure development in biaxially stretched PEN/PEI/PEEK ternary blends Fulltext Access 17 Pages 2006
Interaction of cyclodextrins with side chains of water soluble polymers: A simple model for biological molecular recognition and its utilization for stimuli-responsive systems Fulltext Access 17 Pages 2006
A comparison of poly(ether imide)s from diamines with 2-aminophenoxy or 4-aminophenoxy units: Synthesis, characterization and properties Fulltext Access 17 Pages 2006
Physico-chemical aspects of polyethylene processing in an open mixer. Part 26: Formal kinetics of aldehyde and carboxylic acid formation at a constant rate Fulltext Access 17 Pages 2006
Mechanical behaviour of biodegradable agricultural films under real field conditions Fulltext Access 17 Pages 2006
Hydrolytic stability and hydrolysis reaction mechanism of bis(2,4-di-tert-butyl)pentaerythritol diphosphite (Alkanox P-24) Fulltext Access 17 Pages 2006
On the simultaneous optimization of pressure and layout for gas permeation membrane systems Fulltext Access 17 Pages 2006
Transport and structural characteristics of crosslinked poly(ethylene oxide) rubbers Fulltext Access 17 Pages 2006
Performance of natural gas membranes in the presence of heavy hydrocarbons Fulltext Access 17 Pages 2006
Application of thin film composite membranes to the membrane aromatic recovery system Fulltext Access 17 Pages 2006
Fluorine in medicinal chemistry: Recent therapeutic applications of fluorinated small molecules Fulltext Access 17 Pages 2006
Drug/device combinations for local drug therapies and infection prophylaxis Fulltext Access 18 Pages 2006
Parameters influencing the stealthiness of colloidal drug delivery systems Fulltext Access 18 Pages 2006
Metallocene ethylene-1-octene copolymers: Influence of comonomer content on thermo-mechanical, rheological, and thermo-oxidative behaviours before and after melt processing in an internal mixer Fulltext Access 18 Pages 2006
Physico-chemical aspects of polyethylene processing in an open mixer. Part 18: Mechanisms and kinetics of trans-vinylene group formation Fulltext Access 18 Pages 2006
Physico-chemical aspects of polyethylene processing in an open mixer. Part 22: Mechanisms and kinetics of vinyl and vinylidene group consumption Fulltext Access 18 Pages 2006
The synthesis of novel 3-substituted polypyrroles bearing crown-ether moieties and a study of their electrochemical properties Fulltext Access 18 Pages 2006
Comprehensive kinetic characterization of the oxidation and gasification of model and real diesel soot by nitrogen oxides and oxygen under engine exhaust conditions: Measurement, Langmuir–Hinshelwood, and Arrhenius parameters Fulltext Access 18 Pages 2006
Gastroretentive dosage forms: Overview and special case of Helicobacter pylori Fulltext Access 18 Pages 2006
New succinamic acids, -γ-lactones, and -succinimides from (3-perfluoroalkyl-2-iodoalkyl)succinic acid anhydrides and amines : Highly surface active amphiphiles Fulltext Access 18 Pages 2006
A review: Non-cross-linked polystyrene bound reagents, catalysts and syntheses Fulltext Access 18 Pages 2006
Developing poly(bis-benzoxazines) with improved fracture toughness. 1: Using molecular simulation to determine and predict structure-property relationships Fulltext Access 19 Pages 2006
Compatibilisation of PPE/SAN blends by triblock terpolymers: Correlation between block terpolymer composition, morphology and properties Fulltext Access 19 Pages 2006
Fracture length scales in human cortical bone: The necessity of nonlinear fracture models Fulltext Access 19 Pages 2006
A general kinetic method to predict sequence length distributions for non-linear irreversible multicomponent polymerizations Fulltext Access 19 Pages 2006
Physical properties of poly(n-alkyl acrylate) copolymers. Part 1. Crystalline/crystalline combinations Fulltext Access 19 Pages 2006
Role of antioxidants in prophylaxis and therapy: A pharmaceutical perspective Fulltext Access 19 Pages 2006
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering Fulltext Access 19 Pages 2006
Evaluation of different methods for the determination of the plateau modulus and the entanglement molecular weight Fulltext Access 19 Pages 2006
Surface engineering approaches to micropattern surfaces for cell-based assays Fulltext Access 20 Pages 2006
Fabrication methods of porous metals for use in orthopaedic applications Fulltext Access 20 Pages 2006
Surface roughness and gloss of dental materials as a function of force and polishing time in vitro Fulltext Access 20 Pages 2006
Hydroxylated hyperbranched polyesters as crosslinking agents for polyurethane networks: Partial modification of the OH chain ends Fulltext Access 20 Pages 2006
Nanoparticle induced network self-assembly in polymer-carbon black composites Fulltext Access 21 Pages 2006
Recent advances (1995–2005) in fluorinated pharmaceuticals based on natural products Fulltext Access 21 Pages 2006
Aspects of the thermal and photostabilisation of high styrene-butadiene copolymer (SBC) Fulltext Access 22 Pages 2006
Time-lags for radial transport with boundary-layer resistance in a ν-dimensional membrane Fulltext Access 23 Pages 2006
Design of rapidly assembling supramolecular systems responsive to synchronized stimuli Fulltext Access 24 Pages 2006
Science and technology of rubber reclamation with special attention to NR-based waste latex products Fulltext Access 24 Pages 2006
Supercritical carbon dioxide as a green solvent for processing polymer melts: Processing aspects and applications Fulltext Access 25 Pages 2006
From controlled ring-opening polymerization to biodegradable aliphatic polyester: Especially poly(β-malic acid) derivatives Fulltext Access 25 Pages 2006
The effects of processing and organoclay properties on the structure of poly(methyl methacrylate)-clay nanocomposites Fulltext Access 25 Pages 2006
Synthesis of functional Ï-conjugated polymers from aromatic acetylenes Fulltext Access 26 Pages 2006