Preparation and characterization of wollastonite/titanium oxide nanofiber bioceramic composite as a future implant material Fulltext Access 10 Pages 2016
Development of a quick screening staining test for detecting the oxidation potential of iron sulfide-bearing aggregates for use in concrete Fulltext Access 10 Pages 2016
Fabrication and characterization of new bulky layer mixed metal oxide ceramic nanofibers through two nozzle electrospinning method Fulltext Access 10 Pages 2016
Thermal shock behaviour of laminated multilayer refractories for steel casting applications reinforced by residual stresses Fulltext Access 10 Pages 2016
Effects of mechanical activation and two-step sintering on the structure and electrical properties of cordierite-based ceramics Fulltext Access 10 Pages 2016
Improvement in concrete resistance against water and chloride ingress by adding graphene nanoplatelet Fulltext Access 10 Pages 2016
Novel gamma irradiated agarose-gelatin-hydroxyapatite nanocomposite scaffolds for skin tissue regeneration Fulltext Access 10 Pages 2016
Natural and synthetic hydroxyapatite/zirconia composites: A comparative study Fulltext Access 10 Pages 2016
Efficient synthesis of silver-reduced graphene oxide composites with prolonged antibacterial effects Fulltext Access 10 Pages 2016
Impact of chemical variability of ground granulated blast-furnace slag on the phase formation in alkali-activated slag pastes Fulltext Access 10 Pages 2016
Low-loss insulating-conductive ceramic composite with giant permittivity and high permeability using glass phase as separating layer Fulltext Access 10 Pages 2016
Oil swollen surfactant gel based synthesis of metal oxides nanoparticles: An attractive alternative for the conventional sol gel synthesis Fulltext Access 10 Pages 2016
Fabrication and characterization of superhard tungsten boride layers deposited by radio frequency magnetron sputtering Fulltext Access 10 Pages 2016
Preparation, characterization and antibacterial properties of silver nanoparticles–hydroxyapatite composites by a simple and eco-friendly method Fulltext Access 10 Pages 2016
Utilisation of steel furnace slag coarse aggregate in a low calcium fly ash geopolymer concrete Fulltext Access 10 Pages 2016
Evaluation of nanoalumina coated germanium black polyimide membrane as sunshield for application on the communication satellite antenna Fulltext Access 10 Pages 2016
Modeling the thermal radiation properties of thermal barrier coatings based on a random generation algorithm Fulltext Access 10 Pages 2016
Mechanical behaviour of multi-layer half-cells of microtubular solid oxide fuel cells fabricated by the co-extrusion process Fulltext Access 10 Pages 2016
Effect of the rare-earth substitution on the structural, magnetic and adsorption properties in cobalt ferrite nanoparticles Fulltext Access 10 Pages 2016
Graphene/titanium carbide composites prepared by sol–gel infiltration and spark plasma sintering Fulltext Access 10 Pages 2016
Simulations and injection molding experiments for aluminum nitride feedstock Fulltext Access 10 Pages 2016
Substrate preheating and structural properties of power plasma sprayed hydroxyapatite coatings Fulltext Access 10 Pages 2016
Effect of dispersants on the hydrate morphologies of spinel-containing calcium aluminate cement and on the properties of refractory castables Fulltext Access 10 Pages 2016
Potential of using granite waste as raw material for geopolymer synthesis Fulltext Access 10 Pages 2016
Fluoridation of synthetic apatite: Effect on the formation of calcium-deficient hydroxyapatite and the properties of porous scaffold Fulltext Access 10 Pages 2016
Effects of dissolved hydrogen on the crack-initiation and oxidation behavior of nickel-based alloys in high-temperature water Fulltext Access 11 Pages 2016
The flame retardancy and smoke suppression effect of heptaheptamolybdate modified reduced graphene oxide/layered double hydroxide hybrids on polyurethane elastomer Fulltext Access 11 Pages 2016
Influence of mortar resistivity on the rate-limiting step of chloride-induced macro-cell corrosion of reinforcing steel Fulltext Access 11 Pages 2016
Monitoring of chloride stress corrosion cracking of austenitic stainless steel: identification of the phases of the corrosion process and use of a modified accelerated test Fulltext Access 11 Pages 2016
Microstructural, electrochemical and tribo-electrochemical characterisation of titanium-copper biomedical alloys Fulltext Access 11 Pages 2016
Role of secondary phases in the scaling of stained glass windows exposed to rain Fulltext Access 11 Pages 2016
Effects of alloyed Cr and Cu on the corrosion behavior of low-alloy steel in a simulated groundwater solution Fulltext Access 11 Pages 2016
Microstructure and chemical composition of the oxide scale formed on the sanicro 25 steel tubes after fireside corrosion Fulltext Access 11 Pages 2016
The effect of dissolved oxygen on fatigue behavior of Alloy 690 steam generator tubes in borated and lithiated high temperature water Fulltext Access 11 Pages 2016
Tailoring interfacial bonding states of highly thermal performance diamond/Al composites: Spark plasma sintering vs. vacuum hot pressing Fulltext Access 11 Pages 2016
Development and experimental validation of an overlay mortar with biocide activity Fulltext Access 11 Pages 2016
Tensile and compressive properties of chopped carbon fiber tapes reinforced thermoplastics with different fiber lengths and molding pressures Fulltext Access 11 Pages 2016
Compressive stress-strain model for low-calcium fly ash-based geopolymer and heat-cured Portland cement concrete Fulltext Access 11 Pages 2016
Kinetics of the oxidation of stainless steel in hot and concentrated nitric acid in the passive and transpassive domains Fulltext Access 11 Pages 2016
Improving intergranular corrosion resistance in a nickel-free and manganese-bearing high-nitrogen austenitic stainless steel through grain boundary character distribution optimization Fulltext Access 11 Pages 2016
Determination of the out-of-plane tensile strength using four-point bending tests on laminated L-angle specimens with different stacking sequences and total thicknesses Fulltext Access 11 Pages 2016
Shear response of carbon fiber composite octet-truss lattice structures Fulltext Access 11 Pages 2016
Forming induced wrinkling of composite laminates: A numerical study on wrinkling mechanisms Fulltext Access 11 Pages 2016
Experimental measurement of wrinkle formation during draping of non-crimp fabric Fulltext Access 11 Pages 2016
Hygromechanical coupling in laminate composites and its effect on interlaminar failure Fulltext Access 11 Pages 2016
Detection of fibre fracture and ply fragmentation in thin-ply UD carbon/glass hybrid laminates using acoustic emission Fulltext Access 11 Pages 2016
Exploring the influence of micro-structure on the mechanical properties and crack bridging mechanisms of fibrous tufts Fulltext Access 11 Pages 2016
Effect of linear density and yarn structure on the mechanical properties of ramie fiber yarn reinforced composites Fulltext Access 11 Pages 2016
On the characterisation of transverse tensile properties of molten unidirectional thermoplastic composite tapes for thermoforming simulations Fulltext Access 11 Pages 2016
Mechanical behavior of Kevlar/basalt reinforced polypropylene composites Fulltext Access 11 Pages 2016
Toughening modification of polycarbonate/poly(butylene terephthalate) blends achieved by simultaneous addition of elastomer particles and carbon nanotubes Fulltext Access 11 Pages 2016
Mechanical behaviour and damage mechanisms analysis of a flax-fibre reinforced composite by acoustic emission Fulltext Access 11 Pages 2016
Early age strength increase of fly ash blended cement by a ternary hardening accelerating admixture Fulltext Access 11 Pages 2016
Microstructural analysis of recycled concrete using X-ray microtomography Fulltext Access 11 Pages 2016
Toward an indexing approach to evaluate fly ashes for geopolymer manufacture Fulltext Access 11 Pages 2016
Influence of calcium to silica ratio on aluminium uptake in calcium silicate hydrate Fulltext Access 11 Pages 2016
Corrosion behavior of superhydrophobic aluminum alloy in concentrated potassium halide solutions: When the specific anion effect is manifested Fulltext Access 11 Pages 2016
Numerical simulation of heat and mass transport during hydration of Portland cement mortar in semi-adiabatic and steam curing conditions Fulltext Access 11 Pages 2016
Effect of polymer latexes with cleaned serum on the phase development of hydrating cement pastes Fulltext Access 11 Pages 2016
A study on the corrosion of reinforcing bars in alkali-activated fly ash mortars under wet and dry exposures to chloride solutions Fulltext Access 11 Pages 2016
Gas permeability and electrical conductivity of structural concretes: Impact of pore structure and pore saturation Fulltext Access 11 Pages 2016
Effect of supplementary cementitious materials (binder type) on the pore solution chemistry and the corrosion of steel in alkaline environments Fulltext Access 11 Pages 2016
Long-term hygrothermal performance of nuclear reactor concrete containments – Laboratory evaluations of measurement setup, in situ sampling, and moisture flux calculations Fulltext Access 11 Pages 2016
X-ray computed microtomography to study autogenous healing of cementitious materials promoted by superabsorbent polymers Fulltext Access 11 Pages 2016
Effect of particle size and slag content on the early hydration of interground blended cements Fulltext Access 11 Pages 2016
Predicting the flexural response of steel fibre reinforced concrete prisms using a sectional model Fulltext Access 11 Pages 2016
In-situ thermo-mechanical testing of fly ash geopolymer concretes made with quartz and expanded clay aggregates Fulltext Access 11 Pages 2016
Tensile strength of a calcium-aluminate cementitious composite reinforced with basalt textile in a high-temperature environment Fulltext Access 11 Pages 2016
Performance of blended metakaolin/blastfurnace slag alkali-activated mortars Fulltext Access 11 Pages 2016
Predictive convection zone depth of chloride in concrete under chloride environment Fulltext Access 11 Pages 2016
Use of tree pruning wastes for manufacturing of wood reinforced cement composites Fulltext Access 11 Pages 2016
Influence of aging conditions upon the properties of calcined clay and its performance as supplementary cementitious material Fulltext Access 11 Pages 2016
Microstructure and properties of needle punching chopped carbon fiber reinforced carbon and silicon carbide dual matrix composite Fulltext Access 11 Pages 2016
Effects of metal cations on corrosion of mild steel in model fresh water Fulltext Access 11 Pages 2016
Monitoring of 13% Cr martensitic stainless steel corrosion in chloride solution in presence of thiosulphate by acoustic emission technique Fulltext Access 11 Pages 2016
A combined electrochemical and theoretical study into the effect of 2-((thiazole-2-ylimino)methyl)phenol as a corrosion inhibitor for mild steel in a highly acidic environment Fulltext Access 11 Pages 2016
The influence of graphene based smoke suppression agents on reduced fire hazards of polystyrene composites Fulltext Access 11 Pages 2016
Electrophoretic deposition of hydroxyapatite nanoparticles in different alcohols: Effect of Tris (tris(hydroxymethyl)aminomethane) as a dispersant Fulltext Access 11 Pages 2016
Influence of temperature and concentration on tribological properties of silicon nitride in glycerol aqueous solution Fulltext Access 11 Pages 2016
Investigation of microbiologically influenced corrosion of high nitrogen nickel-free stainless steel by Pseudomonas aeruginosa Fulltext Access 11 Pages 2016
Producing dense zirconium diboride components by room-temperature injection molding of aqueous ceramic suspensions Fulltext Access 11 Pages 2016
Antibiotic-loaded Sr-doped porous calcium phosphate granules as multifunctional bone grafts Fulltext Access 11 Pages 2016
Effect of hydrothermal treatment on tribological properties of alumina and zirconia based bioceramics Fulltext Access 11 Pages 2016
Fracture toughness of glasses and hydroxyapatite: A comparative study of 7 methods by using Vickers indenter Fulltext Access 11 Pages 2016
Influence of Co concentration on the structural, optical, morphological and photo-diode properties of cerium oxide thin films Fulltext Access 11 Pages 2016
Factors controlling the mechanical behavior of alumina–magnesia–carbon refractories in air Fulltext Access 11 Pages 2016
Low-valued raw materials challenge the common eligibility criteria for triaxial ceramics Fulltext Access 11 Pages 2016
Pozzolanic reactivity of a calcined interstratified illite/smectite (70/30) clay Fulltext Access 11 Pages 2016