Effect of prior corrosion on short crack behavior in 2024-T3 aluminum alloy Fulltext Access 8 Pages 2008
Galvanostatic pulse technique with the current confinement guard ring: The laboratory and finite element analysis Fulltext Access 8 Pages 2008
An electrochemical study of repassivation of aluminium alloys with SEM examination of the pit interiors using resin replicas Fulltext Access 8 Pages 2008
Preparation and hot corrosion behaviour of a MCrAlY + AlSiY composite coating Fulltext Access 8 Pages 2008
On the corrosion mechanism of AISI 204Cu stainless steel in chlorinated alkaline media Fulltext Access 8 Pages 2008
Microstructure and formation mechanism of cerium conversion coating on alumina borate whisker-reinforced AA6061 composite Fulltext Access 8 Pages 2008
2-Mercaptobenzothiazole monolayers on zinc and silver surfaces for anticorrosion Fulltext Access 8 Pages 2008
Effect of underpotential deposition of lead on polarization behavior of nickel in acidic perchlorate solutions at room temperature Fulltext Access 8 Pages 2008
Bis-isoxazolidines: A new class of corrosion inhibitors of mild steel in acidic media Fulltext Access 8 Pages 2008
Hydrogen-assisted fatigue crack growth of AISI 316L stainless steel weld Fulltext Access 8 Pages 2008
Modelling sea-salt transport and deposition in marine atmosphere zone – A tool for corrosion studies Fulltext Access 8 Pages 2008
A comparative study on the corrosion behaviour of 304 austenitic stainless steel in sulfamic and sulfuric acid solutions Fulltext Access 8 Pages 2008
Inhibiting effects of butyl triphenyl phosphonium bromide on corrosion of mild steel in 0.5Â M sulphuric acid solution and its adsorption characteristics Fulltext Access 8 Pages 2008
Effect of ambient air pressure on the oxidation kinetics of Fe–6 at.% Si alloy Fulltext Access 8 Pages 2008
Influence of nickel additions on the corrosion behaviour of low nitrogen 22% Cr series duplex stainless steels Fulltext Access 8 Pages 2008
XPS analysis of the passive film formed on austenitic stainless steel coated with conductive polymer Fulltext Access 8 Pages 2008
Temperature effect in the corrosion resistance of Ni–Fe–Cr alloy in chloride medium Fulltext Access 8 Pages 2008
Effect of the aluminium content of AlxCrFe1.5MnNi0.5 high-entropy alloys on the corrosion behaviour in aqueous environments Fulltext Access 8 Pages 2008
Simulation and experimental approach to CVD-FBR aluminide coatings on ferritic steels under steam oxidation Fulltext Access 8 Pages 2008
A study of the corrosion behaviour of Zr50Cu(40−X)Al10PdX bulk metallic glasses with scanning Auger microanalysis Fulltext Access 8 Pages 2008
The characterisation of the protective film formed by benzotriazole on the 90/10 copper–nickel alloy surface in H2SO4 media Fulltext Access 8 Pages 2008
Corrosion inhibition of copper in chloride media by 1,5-bis(4-dithiocarboxylate-1-dodecyl-5-hydroxy-3-methylpyrazolyl)pentane Fulltext Access 8 Pages 2008
Corrosion protection with polyaniline and polypyrrole as anticorrosive additives for epoxy paint Fulltext Access 8 Pages 2008
Inhibitory action of Phyllanthus amarus extracts on the corrosion of mild steel in acidic media Fulltext Access 8 Pages 2008
Electrosynthesis of adherent poly(3-amino-1,2,4-triazole) films on brass prepared in nonaqueous solvents Fulltext Access 8 Pages 2008
Sodium gluconate as corrosion and scale inhibitor of ordinary steel in simulated cooling water Fulltext Access 8 Pages 2008
Multicycle chronoammetry of RRDE in the investigation of the anodic oxide formation Fulltext Access 8 Pages 2008
Electrochemical behaviour of stainless steels in media containing iron-oxidizing bacteria (IOB) by corrosion process modeling Fulltext Access 8 Pages 2008
Polarisation behaviour of steel bar samples in concrete in seawater. Part 1: Experimental measurement of polarisation curves of steel in concrete Fulltext Access 8 Pages 2008
Preparation of ultrathin polymer coatings adsorbed on iron via a covalent bond by multistep modification of a hydroxymethylbenzene SAM with ethoxysilanes and alkanediol for preventing iron corrosion in 0.5Â M NaCl Fulltext Access 8 Pages 2008
Intergranular corrosion of welded joints of austenitic stainless steels studied by using an electrochemical minicell Fulltext Access 8 Pages 2008
Evaluation of the resistance of mortars coated with silver bearing zeolite to bacterial-induced corrosion Fulltext Access 8 Pages 2008
Effect of inorganic inhibitors on the corrosion behavior of 1018 carbon steel in the LiBr + ethylene glycol + H2O mixture Fulltext Access 8 Pages 2008
Kinetic modelling of the attenuation of carbon steel canister corrosion due to diffusive transport through corrosion product layers Fulltext Access 8 Pages 2008
Evaluation of nanosilicate filled poly (vinyl chloride-co-vinyl acetate) and epoxy coatings Fulltext Access 8 Pages 2008
New insight in the behaviour of Co–H2O system at 25–150 °C, based on revised Pourbaix diagrams Fulltext Access 8 Pages 2008
Limits determination of toleration of aggressive anions by a certain passivator on zinc surface Fulltext Access 8 Pages 2008
Synergistic corrosion behavior of coated Ti60 alloys with NaCl deposit in moist air at elevated temperature Fulltext Access 8 Pages 2008
On the stress corrosion cracking and hydrogen embrittlement of sensitized austenitic stainless steels in boiling saturated magnesium chloride solutions: Effect of applied stress Fulltext Access 8 Pages 2008
Precipitation control of calcium phosphate on pure magnesium by anodization Fulltext Access 8 Pages 2008
Effect of biofilm on cast iron pipe corrosion in drinking water distribution system: Corrosion scales characterization and microbial community structure investigation Fulltext Access 8 Pages 2008
Mechanical properties of CO2 corrosion product scales and their relationship to corrosion rates Fulltext Access 8 Pages 2008
Effect of precursor characteristics on zirconia and ceria particle morphology in spray pyrolysis Fulltext Access 8 Pages 2008
The effect of antioxidants on the oxidation behaviour of magnesia–carbon refractory bricks Fulltext Access 8 Pages 2008
Characterization and in vitro application of nano-crystalline calcia stabilized zirconia (CSZ)/copolymer composites Fulltext Access 8 Pages 2008
Microstructure refinement of alumina: Optimisation by gas pressure sintering process Fulltext Access 8 Pages 2008
Influence of porosity on the electrical properties of La9.33(SiO4)6O2 oxyapatite Fulltext Access 8 Pages 2008
Synthesis and microstructure of the Ti3SiC2 in SiC matrix grown by chemical vapor deposition Fulltext Access 8 Pages 2008
Influence of chrome-bearing sols vacuum impregnation on the properties of magnesia-chrome refractory Fulltext Access 8 Pages 2008
Microstructural and compositional aspects of ZnO-based varistor ceramics prepared by direct mixing of the constituent phases and high-energy milling Fulltext Access 8 Pages 2008
Shrinkage behavior and interfacial diffusion in Ni-based internal electrodes with BaTiO3 additive Fulltext Access 8 Pages 2008
Studies on the microstructure of the black-glazed bowl sherds excavated from the Jian kiln site of ancient China Fulltext Access 8 Pages 2008
Theoretical analysis of colloidal interaction energy in nanoparticle suspensions Fulltext Access 8 Pages 2008
Prediction of the behaviour of CFRPs against high-velocity impact of solids employing an artificial neural network methodology Fulltext Access 8 Pages 2008
Low temperature production of glass ceramics in the anorthite–diopside system via sintering and crystallization of glass powder compacts Fulltext Access 8 Pages 2008
Effect of the drying techniques on the morphology of silica nanoparticles synthesized via sol–gel process Fulltext Access 8 Pages 2008
Effects of A-site Ca and B-site Zr substitution on dielectric properties and microstructure in tin-doped BaTiO3–CaTiO3 composites Fulltext Access 8 Pages 2008
Sintering behaviour of ceramic bodies from contaminated marine sediments Fulltext Access 8 Pages 2008
Sintering of tricalcium phosphate–fluorapatite composites by addition of alumina Fulltext Access 8 Pages 2008
Surface characteristics and aqueous dispersibility of commercial silicon nitride powders: Effects of acid leaching, surface hydrolysis, and thermal oxidation Fulltext Access 8 Pages 2008
Non-destructive characterisation of alumina/aluminium titanate composites using a micromechanical model and ultrasonic determinations: Part I. Evaluation of the effective elastic constants of aluminium titanate Fulltext Access 8 Pages 2008
The particle size distribution effect on the drying efficiency of polymeric fibers containing castables Fulltext Access 8 Pages 2008
Mechanical properties of wetlaid lyocell and hybrid fiber-reinforced composites with polypropylene Fulltext Access 8 Pages 2008
Influence of pH and flow on the polarisation behaviour of pure magnesium in borate buffer solutions Fulltext Access 8 Pages 2008
Effect of microstructure on the sulphide stress cracking susceptibility of a high strength pipeline steel Fulltext Access 8 Pages 2008
Hydrogen environment embrittlement testing at low temperatures and high pressures Fulltext Access 8 Pages 2008
Electrochemical noise analysis on the pit corrosion susceptibility of Mg–10Gd–2Y–0.5Zr, AZ91D alloy and pure magnesium using stochastic model Fulltext Access 8 Pages 2008
Investigation of the inhibition effect of indole-3-carboxylic acid on the copper corrosion in 0.5 M H2SO4 Fulltext Access 8 Pages 2008
EN, EIS and polarization studies to evaluate the inhibition effect of 3H-phenothiazin-3-one, 7-dimethylamin on mild steel corrosion in 1 M HCl solution Fulltext Access 8 Pages 2008
Mechanical properties of phenolic-based nanocomposites reinforced by multi-walled carbon nanotubes and carbon fibers Fulltext Access 8 Pages 2008
Enhancement of the crack growth resistance of a carbon/epoxy composite by adding multi-walled carbon nanotubes at a cryogenic temperature Fulltext Access 8 Pages 2008
Physico-chemical and microstructural characterization of “Rhectophyllum camerunense” plant fiber Fulltext Access 8 Pages 2008
Effect of shape memory alloy actuation on the dynamic response of polymeric composite plates Fulltext Access 8 Pages 2008
Dynamic mechanical analysis of fumed silica/cyanate ester nanocomposites Fulltext Access 8 Pages 2008
Influence of the synthesis route on sol–gel SiO2–TiO2 (1:1) xerogels and powders Fulltext Access 8 Pages 2008
Chemical recycling of carbon fibre reinforced composites in nearcritical and supercritical water Fulltext Access 8 Pages 2008
Mechanical properties of vibration welded short- and long-glass-fiber-reinforced polypropylene Fulltext Access 8 Pages 2008
The enhancement of carbon fiber modified with electropolymer coating to the mechanical properties of epoxy resin composites Fulltext Access 8 Pages 2008
Experimental investigation of the effect of the mould thermal expansion on the development of internal stresses during carbon fibre composite processing Fulltext Access 8 Pages 2008
Synthesis and characterization of nano-hydroxyapatite rods/poly(l-lactide acid) composite scaffolds for bone tissue engineering Fulltext Access 8 Pages 2008
Silane treatment of bagasse fiber for reinforcement of cementitious composites Fulltext Access 8 Pages 2008
Effect of recycling on mechanical behaviour of biocompostable flax/poly(l-lactide) composites Fulltext Access 8 Pages 2008
Cellulose and cellulignin from sugarcane bagasse reinforced polypropylene composites: Effect of acetylation on mechanical and thermal properties Fulltext Access 8 Pages 2008