Tricalcium aluminate hydration in additivated systems. A crystallographic study by SR-XRPD Fulltext Access 10 Pages 2008
Application of some ferrocene derivatives in the field of corrosion inhibition Fulltext Access 10 Pages 2008
Metal release from stainless steel, Co–Cr–Mo–Ni–Fe and Ni–Ti alloys in vascular implants Fulltext Access 10 Pages 2008
Wetting and penetration of cordierite and mullite materials by non-stoichiometric cordierite liquids Fulltext Access 10 Pages 2008
Changes in microstructure of a high chromia refractory due to interaction with infiltrating coal slag in a slagging gasifier environment Fulltext Access 10 Pages 2008
An alumina–YAG nanostructured fiber prepared from an aqueous sol–gel precursor: Preparation, rheological behavior and spinnability Fulltext Access 10 Pages 2008
Crystallization characteristics and physico-chemical properties of the glasses based on Li2O–CaO–SiO2 eutectic (954 °C) system containing magnesium oxide Fulltext Access 10 Pages 2008
Performance characteristics of cement grouts made with various combinations of high-range water reducer and cellulose-based viscosity modifier Fulltext Access 10 Pages 2008
Thermo-mechanical response of UHPFRC at early age — Experimental study and numerical simulation Fulltext Access 10 Pages 2008
Effect of a high calcite filler addition upon microstructural, mechanical, shrinkage and transport properties of a mortar Fulltext Access 10 Pages 2008
Reactive powder based concretes: Mechanical properties, durability and hybrid use with OPC Fulltext Access 10 Pages 2008
Drying and autogenous shrinkage of pastes and mortars with activated slag cement Fulltext Access 10 Pages 2008
Lost iron and iron converted into rust in steels submitted to dry–wet corrosion process Fulltext Access 10 Pages 2008
3D multi-scale modelling of mechanical behaviour of sound and leached mortar Fulltext Access 10 Pages 2008
The nano-mechanical signature of Ultra High Performance Concrete by statistical nanoindentation techniques Fulltext Access 10 Pages 2008
Transport properties of water and glycol in an ultra high performance fiber reinforced concrete (UHPFRC) under high tensile deformation Fulltext Access 10 Pages 2008
Impact of superplasticizer concentration and of ultra-fine particles on the rheological behaviour of dense mortar suspensions Fulltext Access 10 Pages 2008
Interactions between shrinkage reducing admixtures (SRA) and cement paste's pore solution Fulltext Access 10 Pages 2008
Triaxial behaviour of concrete under high stresses: Influence of the loading path on compaction and limit states Fulltext Access 10 Pages 2008
Shape and size effects on the compressive strength of high-strength concrete Fulltext Access 10 Pages 2008
Mass and momentum interface equilibrium by molecular modeling. Simulating AFM adhesion between (120) gypsum faces in a saturated solution and consequences on gypsum cohesion Fulltext Access 10 Pages 2008
Bacterial carbonate precipitation improves the durability of cementitious materials Fulltext Access 10 Pages 2008
A thermodynamic approach on vapor-condensation of corrosive salts from flue gas on boiler tubes in waste incinerators Fulltext Access 10 Pages 2008
Effect of antimony on the corrosion behavior of low-alloy steel for flue gas desulfurization system Fulltext Access 10 Pages 2008
Correlation of meso- and micro-scale hardness measurements with the pitting of plastically-deformed Type 304L stainless steel Fulltext Access 10 Pages 2008
Photoelectrochemical imaging of metal-scale decohesion on titanium thermally oxidised in oxygen Fulltext Access 10 Pages 2008
Corrosion characterization of tin–lead and lead free solders in 3.5 wt.% NaCl solution Fulltext Access 10 Pages 2008
WITHDRAWN: Chemical composition and electronic structure of passive films formed on Alloy 600 in acidic solution Fulltext Access 10 Pages 2008
Corrosion and corrosion inhibition of Cu–20%Fe alloy in sodium chloride solution Fulltext Access 10 Pages 2008
Evaluation of the effect of dosage, pH and contact time on high-dose phosphate inhibition for copper corrosion control using response surface methodology (RSM) Fulltext Access 10 Pages 2008
Surface oxide formation during corona discharge treatment of AA 1050 aluminium surfaces Fulltext Access 10 Pages 2008
Open circuit potentials of metallic chromium and austenitic 304 stainless steel in aqueous sulphuric acid solution and the influence of chloride ions on them Fulltext Access 10 Pages 2008
A comparison of the oxidation behaviours of Al2O3 formers and Cr2O3 formers at 700 °C – Oxide solid solutions acting as a template for nucleation Fulltext Access 10 Pages 2008
Oxidation behavior of thermal barrier coatings with HVOF and detonation-sprayed NiCrAlY bondcoats Fulltext Access 10 Pages 2008
The electrochemical polishing behavior of the Inconel 718 alloy in perchloric–acetic mixed acids Fulltext Access 10 Pages 2008
The electrochemical dissolution of cobalt in carbonate–bicarbonate solutions from EIS and steady polarization data Fulltext Access 10 Pages 2008
Early stages of the oxidation of a FeCrAlRE alloy (Kanthal AF) at 900 °C: A detailed microstructural investigation Fulltext Access 10 Pages 2008
Electrochemical and theoretical investigation on the corrosion inhibition of mild steel by thiosalicylaldehyde derivatives in hydrochloric acid solution Fulltext Access 10 Pages 2008
Numerical simulations of spatial heterogeneity formation in metal Corrosion Fulltext Access 10 Pages 2008
The use of linear regression methods and Pearson’s correlation matrix to identify mechanical–physical–chemical parameters controlling the micro-electrochemical behaviour of machined copper Fulltext Access 10 Pages 2008
Stress distributions due to hydrogen concentrations in electrochemically charged and aged austenitic stainless steel Fulltext Access 10 Pages 2008
Physiochemical characterization of five iron tubercles from a single drinking water distribution system: Possible new insights on their formation and growth Fulltext Access 10 Pages 2008
Effect of temperature on the corrosion resistance and pitting behaviour of Alloy 31 in LiBr solutions Fulltext Access 10 Pages 2008
Validation of electrochemical impedance measurements for water sorption into epoxy coatings using gravimetry and infra-red spectroscopy Fulltext Access 10 Pages 2008
The flow stress in polycrystalline films: Dimensional constraints and strengthening effects Fulltext Access 10 Pages 2008
The homogeneous dispersion of surfactantless, slightly disordered, crystalline, multiwalled carbon nanotubes in α-alumina ceramics for structural reinforcement Fulltext Access 10 Pages 2008
Study of thermal effects associated with crack propagation during very high cycle fatigue tests Fulltext Access 10 Pages 2008
Origin of intragranular crystallographic misorientations in hot-dip Al–Zn–Si coatings Fulltext Access 10 Pages 2008
Isothermal austenite–ferrite transformation of Fe–0.04 at.% C alloy: Dilatometric measurement and kinetic analysis Fulltext Access 10 Pages 2008
Texture evolution by shear on two planes during ECAP of a high-strength aluminum alloy Fulltext Access 10 Pages 2008
The effect of tin and nitrogen on liquid phase sintering of Al–Cu–Mg–Si alloys Fulltext Access 10 Pages 2008
An extended morphological stability model for a planar interface incorporating the effect of nonlinear liquidus and solidus Fulltext Access 10 Pages 2008
New relationships between relative density and grain size during solid-state sintering of ceramic powders Fulltext Access 10 Pages 2008
Controlled crack arrest in brittle thin films: The effect of embedded voids Fulltext Access 10 Pages 2008
A theoretical model of martensitic transformations in magnetic shape memory alloys: Model formulation and variant reorientation Fulltext Access 10 Pages 2008
Effect of Poisson’s ratio on crack tip fields and fracture behavior of metallic glasses Fulltext Access 10 Pages 2008
Modeling dislocation storage rates and mean free paths in face-centered cubic crystals Fulltext Access 10 Pages 2008
Determination of nucleation and growth modes from evaluation of transformed fraction in solid-state transformation Fulltext Access 10 Pages 2008
The high-temperature elastic moduli of polycrystalline PbTe measured by resonant ultrasound spectroscopy Fulltext Access 10 Pages 2008
Microstructure and mechanical properties of constrained shape-memory alloy nanograins and nanowires Fulltext Access 10 Pages 2008
Grain refinement and improved age hardening of Mg–Zn alloy by a trace amount of V Fulltext Access 10 Pages 2008
Determination of the effective zero-point and the extraction of spherical nanoindentation stress–strain curves Fulltext Access 10 Pages 2008
Stability of Ti–B–N solid solutions and the formation of nc-TiN/a-BN nanocomposites studied by combined ab initio and thermodynamic calculations Fulltext Access 10 Pages 2008
Modeling of isothermal solid-state precipitation using an analytical treatment of soft impingement Fulltext Access 10 Pages 2008
Atomic site location by channelling enhanced microanalysis (ALCHEMI) in γ′-strengthened Ni- and Pt-base alloys Fulltext Access 10 Pages 2008
Strengthening of RC nonductile frames with RC infills: An experimental study Fulltext Access 10 Pages 2008
The influence of aminosilanes on macroscopic properties of cement paste Fulltext Access 10 Pages 2008
Influence of hydration on the fluidity of normal Portland cement pastes Fulltext Access 10 Pages 2008
Predictions and verifications of early-age stress development in hydrating blended cement concrete Fulltext Access 10 Pages 2008
Effect of coarse particle volume fraction on the yield stress and thixotropy of cementitious materials Fulltext Access 10 Pages 2008
Durability of mechanically loaded engineered cementitious composites under highly alkaline environments Fulltext Access 10 Pages 2008
Influences of textile characteristics on the tensile properties of warp knitted cement based composites Fulltext Access 10 Pages 2008
The relation between electrokinetics and chloride transport through cement-based materials Fulltext Access 10 Pages 2008
Influence of the shape and roughness of inclusions on the rheological properties of a cementitious suspension Fulltext Access 10 Pages 2008
Durability of date palm fibres and their use as reinforcement in hot dry climates Fulltext Access 10 Pages 2008
Shear behavior of polymer micro-scale truss structures formed from self-propagating polymer waveguides Fulltext Access 10 Pages 2008
Martensitic transformation and magnetic properties in Ni–Fe–Ga–Co magnetic shape memory alloys Fulltext Access 10 Pages 2008
Measurement of scratch-induced residual stress within SiC grains in ZrB2–SiC composite using micro-Raman spectroscopy Fulltext Access 10 Pages 2008
Control of strain relaxation in tensile and compressive oxide thin films Fulltext Access 10 Pages 2008
Experiments coupled with modeling to establish the Mg-rich phase equilibria of Mg–Al–Ca Fulltext Access 10 Pages 2008
Size-independent strength and deformation mode in compression of a Pd-based metallic glass Fulltext Access 10 Pages 2008
Interactions between non-screw lattice dislocations and coherent twin boundaries in face-centered cubic metals Fulltext Access 10 Pages 2008
3D statistical analysis of a copper powder sintering observed in situ by synchrotron microtomography Fulltext Access 10 Pages 2008
Molecular dynamics investigation of deformation twinning in γ-TiAl sheared along the pseudo-twinning direction Fulltext Access 10 Pages 2008