Characterisation of thermoset laminates for cosmetic automotive applications: Part III – Shrinkage control via nanoscale reinforcement Fulltext Access 16 Pages 2006
Simulation of active flow control based on localized preform heating in a VARTM process Fulltext Access 16 Pages 2006
A temperature and mass dependent thermal model for fire response prediction of marine composites Fulltext Access 16 Pages 2006
Influence of stochastic variations in the fibre spacing on the permeability of bi-directional textile fabrics Fulltext Access 16 Pages 2006
Oxidation behavior of iron-based alloy HCM12A exposed in supercritical water Fulltext Access 16 Pages 2006
Microstructural and corrosive interactions in phosphorus ion implanted 304L stainless steel—I. Alterations in microstructure by implantation Fulltext Access 16 Pages 2006
Protective action towards aluminium corrosion by silanes with a long aliphatic chain Fulltext Access 16 Pages 2006
Comparative study of Cr3C2–NiCr coatings obtained by HVOF and hard chromium coatings Fulltext Access 16 Pages 2006
Direct modification of a passivated iron electrode with alkyltriethoxysilanes for preventing passive film breakdown in a borate buffer containing 0.1 M of chloride ion Fulltext Access 16 Pages 2006
Electronic structure of anodic oxide films formed on cobalt by cyclic voltammetry Fulltext Access 16 Pages 2006
Effect of cerium addition on the corrosion behaviour of carbon-alloyed iron aluminides Fulltext Access 16 Pages 2006
Hydrogen effects on the passive film formation and pitting susceptibility of nitrogen containing type 316L stainless steels Fulltext Access 16 Pages 2006
Characterization of microstructure and corrosion properties of cold worked Alloy 800 Fulltext Access 16 Pages 2006
The influence of microstructure on the corrosion behaviour of AZ91D studied by scanning Kelvin probe force microscopy and scanning Kelvin probe Fulltext Access 16 Pages 2006
The nature of the surface film on steel treated with cerium and lanthanum cinnamate based corrosion inhibitors Fulltext Access 16 Pages 2006
Novel corrosion experiments using the wire beam electrode. (I) Studying electrochemical noise signatures from localised corrosion processes Fulltext Access 16 Pages 2006
Electrochemical chloride extraction (ECE) from steel-reinforced concrete specimens contaminated by “artificial” sea-water Fulltext Access 16 Pages 2006
A new method for decontamination of radioactive waste using low-pressure arc discharge Fulltext Access 16 Pages 2006
An investigation into the corrosion of Ag coins from the Greek colonies of Southern Italy. Part I: An in situ FT-IR and ERS investigation of the behaviour of Ag in contact with aqueous solutions containing 4-cyanopyridine Fulltext Access 16 Pages 2006
Effect of artificial aging on intergranular corrosion of extruded AlMgSi alloy with small Cu content Fulltext Access 16 Pages 2006
Erosion–corrosion of mild steel in hot caustic. Part II: The effect of acid cleaning Fulltext Access 16 Pages 2006
Reactivity of polyester aliphatic amine surfactants as corrosion inhibitors for carbon steel in formation water (deep well water) Fulltext Access 16 Pages 2006
Studies on the effect of a newly synthesized Schiff base compound from phenazone and vanillin on the corrosion of steel in 2 M HCl Fulltext Access 16 Pages 2006
Effect of Al and Ce oxide layers electrodeposited on OC4004 stainless steel on its corrosion characteristics in acid media Fulltext Access 16 Pages 2006
Aminopyrimidine derivatives as inhibitors for corrosion of 1018 carbon steel in nitric acid solution Fulltext Access 16 Pages 2006
Identification and modeling of fatigue crack growth mechanisms in a die-cast AM50 magnesium alloy Fulltext Access 16 Pages 2006
Assessment of ultimate bearing capacity of RC sections affected by mineral oil Fulltext Access 16 Pages 2006
Thermal buckling of angle-ply laminated composite and sandwich plates according to a global higher-order deformation theory Fulltext Access 16 Pages 2006
Micromechanisms of load transfer in a unidirectional carbon fibre–reinforced epoxy composite due to fibre failures. Part 1: Micromechanisms and 3D analysis of load transfer: The elastic case Fulltext Access 16 Pages 2006
Influence of specimen preparation by machining on the failure of polymer matrix off-axis tensile coupons Fulltext Access 16 Pages 2006
A model for the mechanical response of composites with thermoplastic-elastomer matrices Fulltext Access 16 Pages 2006
Analytical model for the in-plane shear behavior of URM walls retrofitted with FRP Fulltext Access 16 Pages 2006
Experimental investigation of stamp forming of unconsolidated commingled E-glass/polypropylene fabrics Fulltext Access 16 Pages 2006
Probabilistic strength prediction for double lap joints composed of pultruded GFRP profiles – Part II: Strength prediction Fulltext Access 16 Pages 2006
Efficient 3D and 2D failure conditions for UD laminae and their application within the verification of the laminate design Fulltext Access 16 Pages 2006
An energy based damage mechanics approach to modelling impact onto woven composite materials—Part I: Numerical models Fulltext Access 16 Pages 2006
A combined experimental and computational study of deformation in grains of biomedical grade 316LVM stainless steel Fulltext Access 16 Pages 2006
Interface structure, chemistry and properties of NiAl composites fabricated from matrix-coated single-crystalline Al2O3 fibres (sapphire) with and without an hBN interlayer Fulltext Access 16 Pages 2006
Modelling of recrystallisation textures in aluminium alloys: II. Model performance and experimental validation Fulltext Access 16 Pages 2006
The influence of different drying methods on cement paste microstructures as reflected by gas adsorption: Comparison between freeze-drying (F-drying), D-drying, P-drying and oven-drying methods Fulltext Access 16 Pages 2006
Sulfate attack monitored by microCT and EDXRD: Influence of cement type, water-to-cement ratio, and aggregate Fulltext Access 16 Pages 2006
Characterisation of random carbon fibre composites from a directed fibre preforming process: The effect of fibre length Fulltext Access 16 Pages 2006
Improvement in steam oxidation resistance of Fe–10%Cr–0.08%C steel by suppressing hydrogen dissolution Fulltext Access 17 Pages 2006
Electrochemical impedance characteristics of Ta/Cu contact regions in polishing slurries used for chemical mechanical planarization of Ta and Cu: considerations of galvanic corrosion Fulltext Access 17 Pages 2006
Influence of tensile straining on the permeation of hydrogen in low alloy Cr–Mo steels Fulltext Access 17 Pages 2006
The influence of silicate on the development of acidity in corrosion product deposits on SIMFUEL (UO2) Fulltext Access 17 Pages 2006
Influence of alloying elements on the corrosion resistance of rolled zinc sheet Fulltext Access 17 Pages 2006
The effect of alloying element gallium on the polarization characteristics of Pb-free Sn–Zn–Ag–Al–XGa solders in NaCl solution Fulltext Access 17 Pages 2006
Thermodynamic and kinetic consideration on the corrosion of Fe, Ni and Cr beneath a molten KCl–ZnCl2 mixture Fulltext Access 17 Pages 2006
The effect of modification with hydrogen peroxide on a hydrated cerium(III) oxide layer for protection of zinc against corrosion in 0.5 M NaCl Fulltext Access 17 Pages 2006
Sub-surface mechanical damage distributions during grinding of fused silica Fulltext Access 17 Pages 2006
Self-trapped holes in pure-silica glass: A history of their discovery and characterization and an example of their critical significance to industry Fulltext Access 17 Pages 2006
Catalytic properties of NiSO4/ZrO2 promoted with Fe2O3 for acid catalysis Fulltext Access 17 Pages 2006
Spectroscopic investigation and simulation of the crystal field effect as well as paramagnetic behavior of K2La1âxPrxCl5 ternary chlorides Fulltext Access 17 Pages 2006
Synthesis of polymer/Laponite nanocomposite latex particles via emulsion polymerization using silylated and cation-exchanged Laponite clay platelets Fulltext Access 17 Pages 2006
Statistical analysis of random sphere packings with variable radius distribution Fulltext Access 17 Pages 2006
Description of crack propagation – theoretical approach and fitting accuracy to measurement results Fulltext Access 17 Pages 2006
Effect of nitrogen on corrosion behavior of 28Cr–7Ni duplex and microduplex stainless steels in air-saturated 3.5 wt% NaCl solution Fulltext Access 17 Pages 2006
The possibility of adjusting concrete mixtures' fluidity by means of superplasticizer SNF Fulltext Access 17 Pages 2006
Near surface mounted CFRP laminates for shear strengthening of concrete beams Fulltext Access 17 Pages 2006
Corrosion damage diagnosis of a reinforced concrete beam after 40 years natural exposure in marine environment Fulltext Access 17 Pages 2006
Dynamic response of composite sandwich plates subjected to initial stresses Fulltext Access 17 Pages 2006
Filament winding: kinematics, collision control and process optimisation through application of dynamic programming Fulltext Access 17 Pages 2006
Numerical simulation of three-dimensional flow and analysis of filling process in compression resin transfer moulding Fulltext Access 17 Pages 2006
Several questions about electrochemical rehabilitation methods for reinforced concrete structures Fulltext Access 17 Pages 2006
Study of the corrosion behaviour of Cu–10Sn bronze in aerated Na2SO4 aqueous solution Fulltext Access 17 Pages 2006
Understanding electrodeposition of polyaniline coatings for corrosion prevention applications using the wire beam electrode method Fulltext Access 17 Pages 2006
Permeation measurements to study hydrogen uptake by steel electroplated with zinc–cobalt alloys Fulltext Access 17 Pages 2006
Formation and properties of stannate conversion coatings on AZ61 magnesium alloys Fulltext Access 17 Pages 2006
Formation of poorly crystalline iron monosulfides: Surface redox reactions on high purity iron, spectroelectrochemical studies Fulltext Access 17 Pages 2006
Complete protection of a passive film on iron from breakdown in a borate buffer containing 0.1 M of Cl− by coverage with an ultrathin film of two-dimensional polymer Fulltext Access 17 Pages 2006
Effect of low copper content and heat treatment on intergranular corrosion of model AlMgSi alloys Fulltext Access 17 Pages 2006
Monitoring corrosion rates and localised corrosion in low conductivity water Fulltext Access 17 Pages 2006
The third-element effect in the oxidation of Ni–xCr–7Al (x = 0, 5, 10, 15 at.%) alloys in 1 atm O2 at 900–1000 °C Fulltext Access 17 Pages 2006
Corrosion behaviour of steel in the presence of Y(III) salts: Kinetic and mechanistic studies Fulltext Access 17 Pages 2006
Detection of deleterious phases in duplex stainless steel by weak galvanostatic polarization in alkaline solution Fulltext Access 17 Pages 2006
Morphological characterisation and spectroscopic studies of the corrosion behaviour of tungsten heavy alloys Fulltext Access 17 Pages 2006
Effect of iron-containing intermetallic particles on the corrosion behaviour of aluminium Fulltext Access 17 Pages 2006
Investigations on the passivity of iron in borate and phosphate buffers, pH 8.4 Fulltext Access 17 Pages 2006
Localized electrochemical investigations of Pd73Cu13.5 ceramic firing dental alloy in DIN-saliva Fulltext Access 17 Pages 2006
Atomic-scale structure and morphology of ferric oxyhydroxides formed by corrosion of iron in various aqueous media Fulltext Access 17 Pages 2006