Carbon-supported Pt-Ru catalysts prepared by the Nafion stabilized alcohol-reduction method for application in direct methanol fuel cells Fulltext Access 11 Pages 2005
Optimisation of processing and microstructural parameters of LSM cathodes to improve the electrochemical performance of anode-supported SOFCs Fulltext Access 11 Pages 2005
Introduction of an improved gas chromatographic analysis and comparison of methods to determine methanol crossover in DMFCs Fulltext Access 11 Pages 2005
The hydrogen economy: a threat or an opportunity for lead-acid batteries? Fulltext Access 11 Pages 2005
Interfacial properties of photovoltaic TiO2/dye/PEDOT-PSS heterojunctions Fulltext Access 11 Pages 2005
Anodic behaviour and X-ray photoelectron spectroscopy of ternary tin oxides Fulltext Access 11 Pages 2005
Synthesis, characterization, and conductivity measurements of hybrid membranes containing a mono-lacunary heteropolyacid for PEM fuel cell applications Fulltext Access 11 Pages 2005
Predictions of internal temperature distribution of PEMFC by non-destructive inverse method Fulltext Access 11 Pages 2005
Improved performance of rechargeable alkaline batteries via surfactant-mediated electrosynthesis of MnO2 Fulltext Access 11 Pages 2005
Real-time strategy for active power sharing in a fuel cell powered battery charger Fulltext Access 11 Pages 2005
Non-destructive inverse method for determination of irregular internal temperature distribution in PEMFCs Fulltext Access 11 Pages 2005
Simulation of a thermally coupled metal-hydride hydrogen storage and fuel cell system Fulltext Access 11 Pages 2005
Kinetics, simulation and optimization of methanol steam reformer for fuel cell applications Fulltext Access 11 Pages 2005
The conductivity and characterization of the plasticized polymer electrolyte based on the P(AN-co-GMA-IDA) copolymer with chelating group Fulltext Access 11 Pages 2005
Influence of impurities on the conductivity of composites in the system (3YSZ)1âx-(MgO)x Fulltext Access 11 Pages 2005
Influence of the anodic recirculation transient behaviour on the SOFC hybrid system performance Fulltext Access 11 Pages 2005
The electrochemical properties of Fe2O3-loaded carbon electrodes for iron-air battery anodes Fulltext Access 11 Pages 2005
Ab initio thermodynamic properties of stoichiometric phases in the Ni-Al system Fulltext Access 11 Pages 2005
Thermodynamics of interfacial energy in binary metallic systems: influence of adsorption on dihedral angles Fulltext Access 11 Pages 2005
Influence of fine particles on grain coarsening within an orientation gradient Fulltext Access 11 Pages 2005
Microtexture and macrotexture formation in the containerless solidification of undercooled Ni-18.7 at.% Sn eutectic melts Fulltext Access 11 Pages 2005
Strain-induced grain refinement of cobalt during surface mechanical attrition treatment Fulltext Access 11 Pages 2005
A continuum model for the creep of single crystal nickel-base superalloys Fulltext Access 11 Pages 2005
Determination of interface integrity in high volume fraction polymer composites at all strain levels Fulltext Access 11 Pages 2005
Dynamic restoration mechanisms in α-zirconium at elevated temperatures Fulltext Access 11 Pages 2005
Partial substitution of Co and Ge for Fe and B in Fe-Zr-B-Cu alloys: microstructure and soft magnetic applicability at high temperature Fulltext Access 11 Pages 2005
A delamination mechanism for thermal barrier coatings subject to calcium-magnesium-alumino-silicate (CMAS) infiltration Fulltext Access 11 Pages 2005
Kinetic Monte Carlo simulation of clustering in an Al-Zn-Mg-Cu alloy (7050) Fulltext Access 11 Pages 2005
Experimental analysis of the CHP performance of a PEMFC stack by a 24 factorial design Fulltext Access 11 Pages 2005
A phase field model for the simulation of grain growth in materials containing finely dispersed incoherent second-phase particles Fulltext Access 11 Pages 2005
Rearrangement and pore size evolution during WC-Co sintering below the eutectic temperature Fulltext Access 11 Pages 2005
Promoting exclusive α-Al2O3 growth upon high-temperature oxidation of NiCrAl alloys: experiment versus model predictions Fulltext Access 11 Pages 2005
Formation mechanism of graded composition in Al-Al2Cu functionally graded materials fabricated by a centrifugal in situ method Fulltext Access 11 Pages 2005
Synthesis, characterization and electrical and CO2 sensing properties of triazine containing three dendritic phthalocyanine Fulltext Access 11 Pages 2005
Thermo-induced changes in EPR spectra of metal-free oligo- and polyphthalocyanines Fulltext Access 11 Pages 2005
Novel fluorene-pyridine-based alternating copolymers: syntheis, characterization and optical properties Fulltext Access 11 Pages 2005
Electroosmotic flow through polymer electrolyte membranes in PEM fuel cells Fulltext Access 11 Pages 2005
The response of a woven graphite fiber/polyimide composite to aging in nitrogen Fulltext Access 11 Pages 2005
The influence of shock-pulse shape on the structure/property behavior of copper and 316 L austenitic stainless steel Fulltext Access 11 Pages 2005
Microstructural investigations of interfaces in short fiber reinforced AlSi12CuMgNi composites Fulltext Access 11 Pages 2005
Investigation of shear band evolution in amorphous alloys beneath a Vickers indentation Fulltext Access 11 Pages 2005
Martensitic reorientation and shape-memory effect in initially textured polycrystalline Ti–Ni sheet Fulltext Access 11 Pages 2005
Bivariate stereological unfolding procedure for randomly oriented chopped fibers or whiskers Fulltext Access 11 Pages 2005
Measurement and modelling of residual stresses in straightened commercial eutectoid steel rods Fulltext Access 11 Pages 2005
Transmission electron microscopy and atomic force microscopy characterisation of titanium-base alloys nitrided under glow discharge Fulltext Access 11 Pages 2005
Grain refinement of Al alloys: Mechanisms determining as-cast grain size in directional solidification Fulltext Access 11 Pages 2005
The effect of lattice misfit on the dislocation motion in superalloys during high-temperature low-stress creep Fulltext Access 11 Pages 2005
On the origin and stability of the metastable phase in rapidly solidified Sn–Bi alloy particles embedded in Al matrix Fulltext Access 11 Pages 2005
Multiple maxima of GFA in three adjacent eutectics in Zr–Cu–Al alloy system – A metallographic way to pinpoint the best glass forming alloys Fulltext Access 11 Pages 2005
Nano-sized twins induce high rate sensitivity of flow stress in pure copper Fulltext Access 11 Pages 2005
Mechanical milling and subsequent annealing effects on the microstructural and hydrogenation properties of multisubstituted LaNi5 alloy Fulltext Access 11 Pages 2005
A protocol for validating models of the cyclic undulation of thermally grown oxides Fulltext Access 11 Pages 2005
Micromechanics of deformation of metallic-glass–matrix composites from in situ synchrotron strain measurements and finite element modeling Fulltext Access 11 Pages 2005
Mechanical properties of micro-sized copper bending beams machined by the focused ion beam technique Fulltext Access 11 Pages 2005
Effects of Ti additions on the nanostructure and creep properties of precipitation-strengthened Al–Sc alloys Fulltext Access 11 Pages 2005
Static and dynamic aspects of coupling between creep behavior and oxidation on MC2 single crystal superalloy at 1150 °C Fulltext Access 11 Pages 2005
An experimental and theoretical study of the stress transfer problem in fibrous composites Fulltext Access 11 Pages 2005
Crystallography of [0 1 1]/54.7° lath boundary and cementite in tempered 0.2C steel Fulltext Access 11 Pages 2005
The self-accommodated morphology of martensite in nanocrystalline NiTi shape memory alloys Fulltext Access 11 Pages 2005
Preferential oxidation of CO in a H2-rich stream over CuO/CeO2 and CuO/(Ce,M)Ox (MÂ =Â Zr, Tb) catalysts Fulltext Access 11 Pages 2005
A novel power conversion circuit for cost-effective battery-fuel cell hybrid systems Fulltext Access 11 Pages 2005
Multifractal analysis of the Portevin–Le Chatelier effect: General approach and application to AlMg and AlMg/Al2O3 alloys Fulltext Access 11 Pages 2005
Spectral methods for capturing crystallographic texture evolution during large plastic strains in metals Fulltext Access 11 Pages 2005
Nucleation of dislocations from [0 0 1] bicrystal interfaces in aluminum Fulltext Access 11 Pages 2005
Phase-field microelasticity theory and micromagnetic simulations of domain structures in giant magnetostrictive materials Fulltext Access 11 Pages 2005
Fatigue threshold R-curves for predicting reliability of ceramics under cyclic loading Fulltext Access 11 Pages 2005
Modelling of phase transformation kinetics in Ti alloys – Isothermal treatments Fulltext Access 11 Pages 2005
Microstructure and texture evolution in the tension of superplastic Al–6Cu–0.4Zr Fulltext Access 11 Pages 2005
Compressive creep of fine and coarse-grained T3SiC2 in air in the 1100–1300 °C temperature range Fulltext Access 11 Pages 2005
Lattice and grain boundary diffusion of cations in 3YTZ analyzed using SIMS Fulltext Access 11 Pages 2005
Pinch-off maps for the design of morphologically stable multilayer thin films with immiscible phases Fulltext Access 11 Pages 2005
Diffraction whole-pattern modelling study of anti-phase domains in Cu3Au Fulltext Access 11 Pages 2005
Predictive model for void nucleation and void growth controlled ductility in quasi-eutectic cast aluminium alloys Fulltext Access 11 Pages 2005
Anode-supported intermediate-temperature direct internal reforming solid oxide fuel cell Fulltext Access 12 Pages 2005
Computational fluid dynamics modeling of polymer electrolyte membrane fuel cells Fulltext Access 12 Pages 2005
Microlith catalytic reactors for reforming iso-octane-based fuels into hydrogen Fulltext Access 12 Pages 2005
Interaction of metallic SOFC interconnect materials with glass-ceramic sealant in various atmospheres Fulltext Access 12 Pages 2005
Solid oxide fuel cell systems for residential micro-combined heat and power in the UK: Key economic drivers Fulltext Access 12 Pages 2005