In vivo study on biocompatibility and bonding strength of Ti/Ti–20 vol.% HA/Ti–40 vol.% HA functionally graded biomaterial with bone tissues in the rabbit Fulltext Access 7 Pages 2006
Matrix grain refinement in Al–TiAl composites by severe plastic deformation: Influence of particle size and processing route Fulltext Access 7 Pages 2006
Effect of die-casting parameters on the production of high quality bulk metallic glass samples Fulltext Access 7 Pages 2006
Interfacial microstructure and mechanical properties of diffusion-bonded titanium–stainless steel joints using a nickel interlayer Fulltext Access 7 Pages 2006
Numerical correlation of the cavitation bubble collapse load and frequency with the pitting damage of flame quenched Cu–9Al–4.5Ni–4.5Fe alloy Fulltext Access 7 Pages 2006
Relative stability of carbides and their effects on the properties of K465 superalloy Fulltext Access 7 Pages 2006
Flow and cavitation in a quasi-superplastic two-phase magnesium–lithium alloy Fulltext Access 7 Pages 2006
Characteristics and performance of Cr2O3/CrN double-layered coatings deposited by cathodic arc plasma deposition Fulltext Access 7 Pages 2006
Deformation-induced transformation textures in metastable austenitic stainless steel Fulltext Access 7 Pages 2006
Correlation of microstructure with hardness and wear resistance of stainless steel blend coatings fabricated by atmospheric plasma spraying Fulltext Access 7 Pages 2006
Influence of thermomechanical processing on the superelastic properties of a Ni-rich Nitinol shape memory alloy Fulltext Access 7 Pages 2006
Microstructure and adhesion strength of Sn–9Zn–xAg lead-free solders wetted on Cu substrate Fulltext Access 7 Pages 2006
Oxidation of two three-phase Cu–30Ni–Cr alloys at 700–800 °C in 1 atm of pure oxygen Fulltext Access 7 Pages 2006
Texture characterisation of hexagonal metals: Magnesium AZ91 alloy, welded by laser processing Fulltext Access 7 Pages 2006
Friction and wear of Synfluo 180XF wax and nano-Al2O3 filled Nomex fabric composites Fulltext Access 7 Pages 2006
Morphological and structural characterisation of electrodeposited Zn–Mn alloys from acidic chloride bath Fulltext Access 7 Pages 2006
Structure and hot-rolled reinforcement rods properties evolution in the process of long service life Fulltext Access 7 Pages 2006
Effects of lower cobalt binder concentrations in sintering of tungsten carbide Fulltext Access 7 Pages 2006
Microstructures and tensile behavior of carbon nanotube reinforced Cu matrix nanocomposites Fulltext Access 7 Pages 2006
Characterization of deformation textures in pure copper processed by equal channel angular extrusion via route A Fulltext Access 7 Pages 2006
Study of the S phase formed on plasma-nitrided AISI 316L stainless steel Fulltext Access 7 Pages 2006
Characterization of the structure and catalytic activity of copper modified palygorskite/TiO2 (Cu2+-PG/TiO2) catalysts Fulltext Access 7 Pages 2006
Use of ball indentation technique to evaluate room temperature mechanical properties of a gas turbine blade Fulltext Access 7 Pages 2006
Surface and electron emission properties of hydrogen-free diamond-like carbon films investigated by atomic force microscopy Fulltext Access 7 Pages 2006
Investigation of the tribological properties of polyfluo wax/polyurethane composite coating filled with nano-SiC or nano-ZrO2 Fulltext Access 7 Pages 2006
Hydrolysis-assisted solidification of alumina slurry dispersed in silica sol without de-airing process Fulltext Access 7 Pages 2006
Fatigue and residual stress relaxation of deep rolled differently aged aluminium alloy AA6110 Fulltext Access 7 Pages 2006
The thermal fatigue resistance of cast iron with biomimetic non-smooth surface processed by laser with different parameters Fulltext Access 7 Pages 2006
Deformation behavior and dynamic recrystallization of a Mg–Zn–Y–Zr alloy Fulltext Access 7 Pages 2006
Corrosion behavior of supermartensitic stainless steel in aerated and CO2-saturated synthetic seawater Fulltext Access 7 Pages 2006
A study on the machinability behaviour of Al–TiC composite prepared by in situ technique Fulltext Access 7 Pages 2006
Investigation of the tribological properties of polyfluo wax/polyurethane composite coatings filled with several micro-particulates Fulltext Access 7 Pages 2006
Effects of solid lubricants on friction and wear properties of Nomex fabric composites Fulltext Access 7 Pages 2006
Electrochemical corrosion behaviour of a novel submicron-grained austenitic stainless steel in an acidic NaCl solution Fulltext Access 7 Pages 2006
Research on the engineering application of multiple pulses treatment for recrystallization of fine copper wire Fulltext Access 7 Pages 2006
Mechanical behaviour and microstructural evolution of magnesium alloy AZ31 in tension at different temperatures Fulltext Access 7 Pages 2006
Hydrostatic extrusion of commercial magnesium alloys at 100 °C and its influence on grain refinement and mechanical properties Fulltext Access 7 Pages 2006
Characterization of the interfacial properties of compound-extruded lightweight profiles using the push-out-technique Fulltext Access 7 Pages 2006
Rapid precipitation of dispersoids during extrusion of an Al–0.91 wt.% Mn–0.13 wt.% Zr–0.17 wt.% Sc-alloy Fulltext Access 7 Pages 2006
Research on dynamic precipitation behavior of pre-solution treated Mg–5 wt.% Zn–2 wt.% Al(–2 wt.%Y) alloy during creep Fulltext Access 7 Pages 2006
Evaluation of oxidation and hydrogen permeation in Al-containing stainless steel alloys Fulltext Access 7 Pages 2006
Microstructure and mechanical behavior of NixAly–Al2O3 in situ composites by pre-oxidation followed by hot-pressed reactive sintering Fulltext Access 7 Pages 2006
Microstructure and tensile properties of in situ synthesized (TiC + TiB + Nd2O3)/Ti-alloy composites at elevated temperature Fulltext Access 7 Pages 2006
Stress transfer and damage evolution simulations of fiber-reinforced polymer–matrix composites Fulltext Access 7 Pages 2006
Fracture characteristics of TMCP and QT steel weldments with respect to crack length Fulltext Access 7 Pages 2006
Effects of fatigue and fretting on residual stresses introduced by laser shock peening Fulltext Access 7 Pages 2006
Core/shell volume effect on the microstructure and mechanical properties of fibrous Al2O3–(m-ZrO2)/t-ZrO2 composite Fulltext Access 7 Pages 2006
Effects of composition on phase structure, microstructure and electrical properties of (K0.5Na0.5)NbO3-LiSbO3 ceramics Fulltext Access 7 Pages 2006
Artificial neural network modeling for evaluating of epitaxial growth of Ti6Al4V weldment Fulltext Access 7 Pages 2006
Synthesis of nanocrystalline carbon nitride films by glow discharge plasma beam deposition Fulltext Access 7 Pages 2006
Damping and tribological properties of Fe–Si–C cast iron prepared using various heat treatments Fulltext Access 7 Pages 2006
High-temperature friction properties of BaSO4 and SrSO4 powder films formed on Al2O3 and stainless steel substrates Fulltext Access 7 Pages 2006
Structural characterization and mechanical properties of SiBONC ceramics derived from polymeric precursors Fulltext Access 7 Pages 2006
Development and characterization of Ni-free Ti-base shape memory and superelastic alloys Fulltext Access 7 Pages 2006
Effect of surfactant on the electrodeposition and wear resistance of Ni–Al2O3 composite coatings Fulltext Access 7 Pages 2006
Microstructure and mechanical properties of ZrB2–MoSi2 ceramic composites produced by different sintering techniques Fulltext Access 7 Pages 2006
Synthesis of SiC microtubes with radial morphology using biomorphic carbon template Fulltext Access 7 Pages 2006
Grain size distribution and heat conductivity of copper processed by equal channel angular pressing Fulltext Access 7 Pages 2006
Effect of ball milling on simultaneous spark plasma synthesis and densification of TiC–TiB2 composites Fulltext Access 7 Pages 2006
Fabrication of ultra-fine grained and dispersion-strengthened titanium materials by spark plasma sintering Fulltext Access 7 Pages 2006
Determination of mechanical properties of aluminium matrix composites constituents Fulltext Access 7 Pages 2006
The role of irradiation-induced phosphorus segregation in the ductile-to-brittle transition temperature in ferritic steels Fulltext Access 7 Pages 2006
Improvement of mechanical properties of aluminum die casting alloy by multi-pass friction stir processing Fulltext Access 7 Pages 2006
Interaction of microcracks with selected interfaces: Focused ion beam for a systematic crack initiation Fulltext Access 7 Pages 2006
The isothermal section of the Co–Cu–Ti ternary system at 1023 K by using diffusion triple technique Fulltext Access 7 Pages 2006
Hydrogen absorption and desorption in a duplex-annealed Ti–6Al–4V alloy during exposure to different hydrogen-containing environments Fulltext Access 7 Pages 2006
Microstructure and interfacial reactions of β-eucryptite particles in aluminum matrix composites Fulltext Access 7 Pages 2006
Characterization of the Ba(SnxTi1−x)O3 thin films prepared by radio frequency magnetron sputtering Fulltext Access 7 Pages 2006
Comparison of the microstructure and mechanical properties of a ZK60 alloy with and without 1.3 wt.% gadolinium addition Fulltext Access 7 Pages 2006
Tensile-hold effects on high-temperature fatigue-crack growth in nickel-based HASTELLOY® X alloy Fulltext Access 7 Pages 2006
Development of fine-grained V–28Cr–2.3Y and V–52Cr–1.8Y alloys with superior mechanical properties Fulltext Access 7 Pages 2006
Thermal stability of double-ceramic-layer thermal barrier coatings with various coating thickness Fulltext Access 7 Pages 2006
Evaluation of material properties of SiC particle reinforced aluminum alloy composite using neutron and X-ray diffraction Fulltext Access 7 Pages 2006
Stress field simulation of the specimen with multi-layer phase structure Fulltext Access 7 Pages 2006
Effect of deposition conditions on mechanical properties of low-temperature PECVD silicon nitride films Fulltext Access 7 Pages 2006
Laser grooving of Al2O3 plate by a pulsed Nd:YAG laser: Characteristics and application to the manufacture of gas sensors array heater Fulltext Access 7 Pages 2006
Deformation and crystallization of a Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass in the supercooled liquid region Fulltext Access 7 Pages 2006
Comparative study on fatigue properties between AA2024-T4 friction stir welds and base materials Fulltext Access 7 Pages 2006
Enhanced corrosion properties of pure Mg and AZ31 Mg alloy recycled by solid-state process Fulltext Access 7 Pages 2006
Effect of incomplete thermal cycling on the transformation behaviour of NiTi Fulltext Access 7 Pages 2006
Effect of thermal history and gallium content on magneto-mechanical properties of iron gallium alloys Fulltext Access 7 Pages 2006
Formation, thermal stability and deformation behavior of graphite-flakes reinforced Cu-based bulk metallic glass matrix composites Fulltext Access 7 Pages 2006