Prediction of cleavage fracture for a low-alloy steel in the ductile-to-brittle transition temperature range Fulltext Access 10 Pages 2005
Effects of crystalline particles on mechanical properties of strip-cast Zr-base bulk amorphous alloy Fulltext Access 10 Pages 2005
Observation of exothermic reaction during laser-assisted iron oxide coating on aluminum alloy Fulltext Access 10 Pages 2005
Variation in the reaction zone and its effects on the strength of diffusion bonded titanium-stainless steel couple Fulltext Access 10 Pages 2005
Hierarchical cellular designs for load-bearing biocomposite beams and plates Fulltext Access 10 Pages 2005
An approach to cyclic plasticity and deformation-induced structure changes of electrodeposited nickel Fulltext Access 10 Pages 2005
Plasticity and damage in aluminum syntactic foams deformed under dynamic and quasi-static conditions Fulltext Access 10 Pages 2005
On the nature of T(Al2Mg3Zn3) and S(Al2CuMg) phases present in as-cast and annealed 7055 aluminum alloy Fulltext Access 10 Pages 2005
Influence of glass additives on the microwave dielectric properties of Ca5Nb2TiO12 ceramics Fulltext Access 10 Pages 2005
Processing maps and rate controlling mechanisms of hot deformation of electrolytic tough pitch copper in the temperature range 300-950 °C Fulltext Access 10 Pages 2005
In situ observations of lattice expansion and transformation rates of α and β phases in Ti-6Al-4V Fulltext Access 10 Pages 2005
Cyclic and isothermal exposures of 310SS to 10%CH4/H2 carburizing gas mixture at high temperatures Fulltext Access 10 Pages 2005
Role of silicon content and final annealing temperature on microtexture and microstructure development in non-oriented silicon steel Fulltext Access 10 Pages 2005
Glass formation and crystallization of Cu47Ti33Zr11Ni8X1 (XÂ =Â Fe, Si, Sn, Pb) alloys Fulltext Access 10 Pages 2005
Processing and microstructure of metal matrix composites prepared by pressureless Ti-activated infiltration using Fe-base and Ni-base alloys Fulltext Access 10 Pages 2005
Antibacterial properties, corrosion resistance and mechanical properties of Cu-modified SUS 304 stainless steel Fulltext Access 10 Pages 2005
The lattice parameter of α-bronzes as a function of solute content: application to archaeological materials Fulltext Access 10 Pages 2005
Compaction of amorphous aluminum alloy powder by direct extrusion and equal channel angular extrusion Fulltext Access 10 Pages 2005
Study by EBSD of the development of the substructure in a hot deformed 304 stainless steel Fulltext Access 10 Pages 2005
Development of refractory armored silicon carbide by infrared transient liquid phase processing Fulltext Access 10 Pages 2005
Scanning probe microscopy examination of the surface properties of keratin fibres Fulltext Access 10 Pages 2005
Simultaneous in situ profiling of DNA lesion endpoints based on image cytometry and a single cell database approach Fulltext Access 10 Pages 2005
Comparison between real and simulated degradation in a 1.25% Cr-0.5% Mo steel for high temperature service Fulltext Access 10 Pages 2005
Chemical inhomogeneity of intermetallic phases precipitates formed during solidification of Al-Si alloys Fulltext Access 10 Pages 2005
X-ray diffraction line profile analysis for defect study in Cu-1 wt.% Cr-0.1 wt.% Zr alloy Fulltext Access 10 Pages 2005
Corrosion behaviors of US steels in flowing lead-bismuth eutectic (LBE) Fulltext Access 10 Pages 2005
Tritium release behavior from the graphite tiles used at the dome unit of the W-shaped divertor region in JT-60U Fulltext Access 10 Pages 2005
Spent fuel radionuclide source-term model for assessing spent fuel performance in geological disposal. Part I: Assessment of the instant release fraction Fulltext Access 10 Pages 2005
Copper precipitate hardening of irradiated RPV materials and implications on the superposition law and re-irradiation kinetics Fulltext Access 10 Pages 2005
Vitrification and testing of a Hanford high-level waste sample. Part 2: Phase identification and waste form leachability Fulltext Access 10 Pages 2005
Ex-reactor corrosion and oxide characteristics of Zr-Nb-Fe alloys with the Nb/Fe ratio Fulltext Access 10 Pages 2005
Influence of silicon content on the precipitation of secondary carbides and fatigue properties of a 5%Cr tempered martensitic steel Fulltext Access 10 Pages 2005
Identification of interfacial parameters in a particle reinforced metal matrix composite Al6061-10%Al2O3 by hybrid method and genetic algorithm Fulltext Access 10 Pages 2005
Benchmark for finite element analysis of stress redistribution induced by creep damage Fulltext Access 10 Pages 2005
Combined probability distributions of random-walks: A new method to simulate diffusion processes Fulltext Access 10 Pages 2005
Thermodynamic description of the Cu-Ni-Si system in the copper-rich corner above 700Â âC Fulltext Access 10 Pages 2005
Martensitic transformation and shape memory effect in Fe-Mn-Si based alloys Fulltext Access 10 Pages 2005
Microwave-absorbing characteristics for the composites of thermal-plastic polyurethane (TPU)-bonded NiZn-ferrites prepared by combustion synthesis method Fulltext Access 10 Pages 2005
Flexible foils with electrochromic coatings: science, technology and applications Fulltext Access 10 Pages 2005
AuxAgy@ZrO2 core-shell nanoparticles: synthesis, characterization, reactivity and optical limiting Fulltext Access 10 Pages 2005
Transmission electron microscopy analysis of grain boundary precipitate-free-zones (PFZs) in an AlCuSiGe alloy Fulltext Access 10 Pages 2005
Microstructure evolution during FSW/FSP of high strength aluminum alloys Fulltext Access 10 Pages 2005
Correlation of microstructure with hardness and wear resistance in Cr3C2/stainless steel surface composites fabricated by high-energy electron beam irradiation Fulltext Access 10 Pages 2005
Experimental study of structure formation in binary Al-Cu alloys at different cooling rates Fulltext Access 10 Pages 2005
Processing and mechanical behavior of laminated titanium-titanium tri-aluminide (Ti-Al3Ti) composites Fulltext Access 10 Pages 2005
A study of the crack wake closure/opening behaviour of short fatigue cracks and its influence on crack growth Fulltext Access 10 Pages 2005
Effect of zinc concentration and experimental parameters on high stress abrasive wear behaviour of Al-Zn alloys: A factorial design approach Fulltext Access 10 Pages 2005
Effect of silicon on atomic distribution and shape memory in Fe-Mn base alloys Fulltext Access 10 Pages 2005
Fabrication of Zr- and Cu-base bulk metallic glass/Cu surface composites by high-energy electron-beam irradiation Fulltext Access 10 Pages 2005
Hot-pressed Si3N4 ceramics with Lu2O3 additives: Grain-boundary phase and strength Fulltext Access 10 Pages 2005
Failure of sandwich beams consisting of alumina face sheet and aluminum foam core in bending Fulltext Access 10 Pages 2005
Indentation size effects in face centered cubic single crystal thin films Fulltext Access 10 Pages 2005
Compression testing of a sintered Ti6Al4V powder compact for biomedical applications Fulltext Access 10 Pages 2005
Characterization of prior cold worked and age hardened Cu-3Ti-1Cd alloy Fulltext Access 10 Pages 2005
Acicular ferritic microstructure of a low-carbon Mn-Mo-Nb microalloyed pipeline steel Fulltext Access 10 Pages 2005
Mechanical properties of Mo5Si3 intermetallics as a function of composition Fulltext Access 10 Pages 2005
Reasons for superior mechanical and corrosion properties of 2219 aluminum alloy electron beam welds Fulltext Access 10 Pages 2005
Quantitative characterization of the atomic-scale structure of oxyhydroxides in rusts formed on steel surfaces Fulltext Access 10 Pages 2005
Kinetics of the actinides-lanthanides separation: mass transfer between molten fluorides and liquid metal at high temperatures Fulltext Access 10 Pages 2005
Factors affecting solidification thermal variables along the cross-section of horizontal cylindrical ingots Fulltext Access 10 Pages 2005
Centrifugally cast Zn-27Al-xMg-ySi alloys and their in situ (Mg2Si + Si)/ZA27 composites Fulltext Access 10 Pages 2005
Constitutive analysis of the high-temperature deformation mechanisms of Ti-6Al-4V and Ti-6.85Al-1.6V alloys Fulltext Access 10 Pages 2005
Effect of crystallization on the mechanical properties of Zr56.7Cu15.3Ni12.5Nb5.0Al10.0Y0.5 bulk amorphous alloy Fulltext Access 10 Pages 2005
Effects of mixed mode loading on fatigue and creep-fatigue in SRR-99 single crystals Fulltext Access 10 Pages 2005
Prediction of cleavage fracture in ferritic steels: a modified Weibull stress model Fulltext Access 10 Pages 2005
Fundamental investigations on the spark plasma sintering/synthesis process Fulltext Access 10 Pages 2005
Effects of tungsten on the microstructures and tribological properties of CrN-Wx% coatings Fulltext Access 10 Pages 2005
Strain path effects on the microstructure evolution and mechanical properties of Zr702 Fulltext Access 10 Pages 2005
Phenomenological observations on thixoformability of a zinc alloy ZA27 and the resulting microstructures Fulltext Access 10 Pages 2005
Effects of substrate constraint on micro-indentation testing of polymer coatings Fulltext Access 10 Pages 2005
Texture evolution during grain growth in recrystallized commercially pure titanium Fulltext Access 10 Pages 2005
Ab initio assisted process modeling for Si-based nanoelectronic devices Fulltext Access 10 Pages 2005
Effects of Nb on the microstructure and corrosive property in the Alloy 690-SUS 304L weldment Fulltext Access 10 Pages 2005
Fracture modes of HAYNES® 230® alloy during fatigue-crack-growth at room and elevated temperatures Fulltext Access 10 Pages 2005
Scratch deformation behavior of thermoplastic materials with significant differences in ductility Fulltext Access 10 Pages 2005
Creep behavior of pure magnesium and Mg-Al alloys in active environments Fulltext Access 10 Pages 2005
Effect of hydrogen and stress concentration on the notch tensile strength of AISI 4135 steel Fulltext Access 10 Pages 2005
The reduction of planar anisotropy by texture modification through asymmetric rolling and annealing in AA5754 Fulltext Access 10 Pages 2005
Grain boundary mobilities during recrystallization of Al-Mn alloys as measured by in situ annealing experiments Fulltext Access 10 Pages 2005
Mechanical behavior of tungsten preform reinforced bulk metallic glass composites Fulltext Access 10 Pages 2005
On the role of liquated γⲠprecipitates in weld heat affected zone microfissuring of a nickel-based superalloy Fulltext Access 10 Pages 2005
Influence of welding defects on the localization behaviour of an aluminum alloy tailor-welded blank Fulltext Access 10 Pages 2005
On the failure of NiAl bicrystals during laser-induced shock compression Fulltext Access 10 Pages 2005