Anticorrosion properties of polyaniline-coated pigments in organic coatings Fulltext Access 12 Pages 2008
In situ monitoring of corrosion processes within the bulk of AlMgSi alloys using X-ray microtomography Fulltext Access 12 Pages 2008
Corrosion behaviour of cermet-based coatings with a bond coat in 0.5 M H2SO4 Fulltext Access 12 Pages 2008
Modelling the shape and thermal dynamics of Ni superalloy rings during spray forming. Part 2: Thermal modelling – Heat flow and solidification Fulltext Access 12 Pages 2008
Effect of fuel and its concentration on the nature of Mn in Mn/CeO2 solid solutions prepared by solution combustion synthesis Fulltext Access 12 Pages 2008
Discrete dislocation plasticity analysis of single crystalline thin beam under combined cyclic tension and bending Fulltext Access 12 Pages 2008
An electron microscopy appraisal of tensile fracture in metallic glasses Fulltext Access 12 Pages 2008
Enhanced strain-rate sensitivity in fcc nanocrystals due to grain-boundary diffusion and sliding Fulltext Access 12 Pages 2008
Effect of precipitation on the shape memory effect of Ti50Ni25Cu25 melt-spun ribbon Fulltext Access 12 Pages 2008
Hydrophobic-tailed bicycloisoxazolidines: A comparative study of the newly synthesized compounds on the inhibition of mild steel corrosion in hydrochloric and sulfuric acid media Fulltext Access 12 Pages 2008
Discrete dislocation analyses of circular nanoindentation and its size dependence in polycrystals Fulltext Access 12 Pages 2008
Barium- and strontium-enriched (Ba0.5Sr0.5)1+xCo0.8Fe0.2O3−δ oxides as high-performance cathodes for intermediate-temperature solid-oxide fuel cells Fulltext Access 12 Pages 2008
PECVD low-permittivity organosilicate glass coatings: Adhesion, fracture and mechanical properties Fulltext Access 12 Pages 2008
The stress–strain response of nanocrystalline metals: A statistical analysis of atomistic simulations Fulltext Access 12 Pages 2008
Influence of Pb segregation on the deformation of nanocrystalline Al: Insights from molecular simulations Fulltext Access 12 Pages 2008
Shear striations and deformation kinetics in highly deformed Zr-based bulk metallic glasses Fulltext Access 12 Pages 2008
Strong violet–blue light photoluminescence emission at room temperature in SrZrO3: Joint experimental and theoretical study Fulltext Access 12 Pages 2008
Accessing the elastic–plastic properties closure by rotation and lamination Fulltext Access 12 Pages 2008
On the origin of deformation-induced rotation patterns below nanoindents Fulltext Access 12 Pages 2008
Oxidation kinetics of high strength low alloy steels at elevated temperatures Fulltext Access 12 Pages 2008
Corrosion of aluminium in the aqueous chemical environment of a loss-of-coolant accident at a nuclear power plant Fulltext Access 12 Pages 2008
Influence of temperature on the interaction mode of T91 and AISI 316L steels with Pb–Bi melt saturated by oxygen Fulltext Access 12 Pages 2008
Effect of nitrite in corrosion of reinforcing steel in neutral and acid solutions simulating the electrolytic environments of micropores of concrete in the propagation period Fulltext Access 12 Pages 2008
Corrosion and metal release rates of Ni substrates under a porous gold coating Fulltext Access 12 Pages 2008
The nature of the third-element effect in the oxidation of Fe–xCr–3 at.% Al alloys in 1 atm O2 at 1000 °C Fulltext Access 12 Pages 2008
The effect of acetic acid on the stress corrosion cracking of 3.5NiCrMoV turbine steels in high temperature water Fulltext Access 12 Pages 2008
Investigation of the corrosion for Mg–xGd–3Y–0.4Zr (x = 6, 8, 10, 12 wt%) alloys in a peak-aged condition Fulltext Access 12 Pages 2008
Photocurrent and capacitance investigations into the nature of the passive films on austenitic stainless steels Fulltext Access 12 Pages 2008
Modelling the relationship between microstructure of Galfan-type coated steel and cut-edge corrosion resistance incorporating diffusion of multiple species Fulltext Access 12 Pages 2008
Investigation of the mechanisms of reactive sintering and combustion synthesis of NiTi using differential scanning calorimetry and microstructural analysis Fulltext Access 12 Pages 2008
Extreme value analysis applied to pitting corrosion experiments in low carbon steel: Comparison of block maxima and peak over threshold approaches Fulltext Access 12 Pages 2008
Investigation of the corrosion behaviour of AA 2024-T3 in low concentrated chloride media Fulltext Access 12 Pages 2008
Influence of cavitation on the passive behaviour of duplex stainless steels in aqueous LiBr solutions Fulltext Access 12 Pages 2008
Oxidation mechanism of an Fe–9Cr–1Mo steel by liquid Pb–Bi eutectic alloy at 470 °C (Part II) Fulltext Access 12 Pages 2008
Atmospheric corrosion of historical organ pipes: The influence of environment and materials Fulltext Access 12 Pages 2008
Corrosion protection of magnesium alloys by cerium, zirconium and niobium-based conversion coatings Fulltext Access 12 Pages 2008
The role of rusts in corrosion and corrosion protection of iron and steel Fulltext Access 12 Pages 2008
The effect of prior deformation on stress corrosion cracking growth rates of Alloy 600 materials in a simulated pressurized water reactor primary water Fulltext Access 12 Pages 2008
Optimizing power consumption for CNC turned parts using response surface methodology and Taguchi's technique—A comparative analysis Fulltext Access 12 Pages 2008
Experimental and numerical study of machined aluminum tailor-made blanks Fulltext Access 12 Pages 2008
An efficient thermal analysis for the prediction of minimum film thickness in inlet zone at high speed lubricated cold strip rolling Fulltext Access 12 Pages 2008
A three-dimensional model of the wire-arc spray process and its experimental validation Fulltext Access 12 Pages 2008
Application of the structured illumination method for automated visual inspection of the loudspeaker cones Fulltext Access 12 Pages 2008
Analyze complex phases of slag–tundish plaster reactions by modified XRD ratio of slopes method for some kinetic considerations Fulltext Access 12 Pages 2008
Six Sigma based approach to optimize radial forging operation variables Fulltext Access 12 Pages 2008
Predicting of the Lüders’ bands in the processing of TH material in computer environment by means of stochastic modeling Fulltext Access 12 Pages 2008
Characterization of the influences of FSW tool geometry on welding forces and weld tensile strength using an instrumented tool Fulltext Access 12 Pages 2008
Modeling and optimization of wire electrical discharge machining of γ-TiAl in trim cutting operation Fulltext Access 12 Pages 2008
Experimental and numerical investigations of near-crack-tip deformation in a solder alloy Fulltext Access 12 Pages 2008
Studies on chromium/aluminium-doped manganese spinel as cathode materials for lithium-ion batteries—A novel chelated sol–gel synthesis Fulltext Access 12 Pages 2008
Experimental and numerical analyses of residual stress distributions in TIG welding process for 304L stainless steel Fulltext Access 12 Pages 2008
A mixtures-based model for the grain size dependent mechanical behavior of nanocrystalline materials Fulltext Access 12 Pages 2008
Genetic algorithm-based burr size minimization in drilling of AISI 316L stainless steel Fulltext Access 12 Pages 2008
Optimization of sheet metal forming processes by adaptive response surface based on intelligent sampling method Fulltext Access 12 Pages 2008
Control of welding residual stress for dissimilar laser welded materials Fulltext Access 12 Pages 2008
Modeling the effects of cutting parameters in MQL-employed finish hard-milling process using D-optimal method Fulltext Access 12 Pages 2008
Anisotropic wetting of ZnO by Bi2O3 with and without nanometer-thick surficial amorphous films Fulltext Access 12 Pages 2008
Influence of stacking-fault energy on microstructural characteristics of ultrafine-grain copper and copper–zinc alloys Fulltext Access 12 Pages 2008
Micromechanical behavior and texture evolution of duplex stainless steel studied by neutron diffraction and self-consistent modeling Fulltext Access 12 Pages 2008
Ageing of thin Ag/fluorocarbon plasma polymer nanocomposite films exposed to water-based electrolytes Fulltext Access 12 Pages 2008
Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures Fulltext Access 12 Pages 2008
Redistribution of alloying elements during tempering of a nanocrystalline steel Fulltext Access 12 Pages 2008
Williamson–Hall anisotropy in nanocrystalline metals: X-ray diffraction experiments and atomistic simulations Fulltext Access 12 Pages 2008
Fracture roughness scaling and its correlation with grain boundary network structure Fulltext Access 12 Pages 2008
On the two-way shape memory behavior in NiTi alloy—An experimental analysis Fulltext Access 12 Pages 2008
Measuring and modeling distributions of stress state in deforming polycrystals Fulltext Access 13 Pages 2008
Synthesis and strong red photoluminescence of europium oxide nanotubes and nanowires using carbon nanotubes as templates Fulltext Access 13 Pages 2008
Nitride precipitation and coarsening in Fe–2.23 at.% V alloys: XRD and (HR)TEM study of coherent and incoherent diffraction effects caused by misfitting nitride precipitates in a ferrite matrix Fulltext Access 13 Pages 2008
Orientation image-based micromechanical modelling of subgrain texture evolution in polycrystalline copper Fulltext Access 13 Pages 2008
Nanoindentation of single-crystalline gold thin films: Correlating hardness and the onset of plasticity Fulltext Access 13 Pages 2008
Microstructural and crystallographic aspects of conventional and asymmetric rolling processes Fulltext Access 13 Pages 2008
Reorientation and stress relaxation due to twinning: Modeling and experimental characterization for Mg Fulltext Access 13 Pages 2008
Effect of initial grain sizes on hardness variation and strain distribution of pure aluminum severely deformed by compression tests Fulltext Access 13 Pages 2008
Direct measurement procedure for three-dimensional local crack driving force using synchrotron X-ray microtomography Fulltext Access 13 Pages 2008
Effect of ethnicity and treatments on in situ tensile response and morphological changes of human hair characterized by atomic force microscopy Fulltext Access 13 Pages 2008
In situ neutron diffraction investigation of the collaborative deformation–transformation mechanism in TRIP-assisted steels at room and elevated temperatures Fulltext Access 13 Pages 2008
Three-dimensional characterization and thermal property modelling of thermally oxidized nuclear graphite Fulltext Access 13 Pages 2008