Five-parameter grain boundary distribution of commercially grain boundary engineered nickel and copper Fulltext Access 11 Pages 2008
Effect of surface condition on the initial corrosion of galvanized reinforcing steel embedded in concrete Fulltext Access 11 Pages 2008
Electrochemical reactivation methods applied to PM austenitic stainless steels sintered in nitrogen–hydrogen atmosphere Fulltext Access 11 Pages 2008
Chemical composition and electronic structure of passive films formed on Alloy 600 in acidic solution Fulltext Access 11 Pages 2008
Effect of sintering temperatures on corrosion and wear properties of sol–gel alumina coatings on surface pre-treated mild steel Fulltext Access 11 Pages 2008
DFT and electrochemical studies of tris(benzimidazole-2-ylmethyl)amine as an efficient corrosion inhibitor for carbon steel surface Fulltext Access 11 Pages 2008
Synergism between rare earth cerium(IV) ion and vanillin on the corrosion of cold rolled steel in 1.0Â M HCl solution Fulltext Access 11 Pages 2008
Multiscale modeling of plastic deformation of molybdenum and tungsten: I. Atomistic studies of the core structure and glide of 1/2〈1 1 1〉 screw dislocations at 0 K Fulltext Access 11 Pages 2008
A new intermediate model for polycrystalline viscoplastic deformation and texture evolution Fulltext Access 11 Pages 2008
A Quasicontinuum study of nanovoid collapse under uniaxial loading in Ta Fulltext Access 11 Pages 2008
Oxidation mechanism of a Fe-9Cr-1Mo steel by liquid Pb–Bi eutectic alloy (Part III) Fulltext Access 11 Pages 2008
Characterization of creep properties and creep textures in pure aluminum processed by equal-channel angular pressing Fulltext Access 11 Pages 2008
Incidence of nanoscale heterogeneity on the nanoindentation of a semicrystalline polymer: Experiments and modeling Fulltext Access 11 Pages 2008
A new spectral framework for establishing localization relationships for elastic behavior of composites and their calibration to finite-element models Fulltext Access 11 Pages 2008
Effect of orientations on cyclic deformation behavior of Ag and Cu single crystals: Cyclic stress–strain curve and slip morphology Fulltext Access 11 Pages 2008
Non-Schmid behaviour during secondary twinning in a polycrystalline magnesium alloy Fulltext Access 11 Pages 2008
Effects of free volume changes and residual stresses on the fatigue and fracture behavior of a Zr–Ti–Ni–Cu–Be bulk metallic glass Fulltext Access 11 Pages 2008
Effect of Hf, Y and C in the underlying superalloy on the rumpling of diffusion aluminide coatings Fulltext Access 11 Pages 2008
On the use of 2-D moment invariants for the automated classification of particle shapes Fulltext Access 11 Pages 2008
Static recrystallization of warm-rolled pure Ti influenced by microstructural inhomogeneity Fulltext Access 11 Pages 2008
On the compatibility of single crystal superalloys with a thermal barrier coating system Fulltext Access 11 Pages 2008
In situ high-energy X-ray studies of magnetic-field-induced phase transition in a ferromagnetic shape memory Ni–Co–Mn–In alloy Fulltext Access 11 Pages 2008
Influence of oxygen ion irradiation on the corrosion aspects of Ti-5%Ta-2%Nb alloy and oxide coated titanium Fulltext Access 11 Pages 2008
Pitting corrosion of welded joints of austenitic stainless steels studied by using an electrochemical minicell Fulltext Access 11 Pages 2008
Inhibitory effect of some amino acids on corrosion of Pb–Ca–Sn alloy in sulfuric acid solution Fulltext Access 11 Pages 2008
(S)TEM study of different stages of Ti–45Al–8Nb–0.2W–0.2B–0.02Y alloy oxidation at 900 °C Fulltext Access 11 Pages 2008
The use of SIMS in quality control and failure analysis of electrodeposited items inspected for hydrogen effects Fulltext Access 11 Pages 2008
Effects of dust and salt particles on the formation and spreading of micro-droplets on AZ91 magnesium alloy Fulltext Access 11 Pages 2008
Corrosion resistance of AISI 1018 carbon steel in NaCl solution by plasma-chemical formation of a barrier layer Fulltext Access 11 Pages 2008
Pitting corrosion behaviour of austenitic stainless steels – combining effects of Mn and Mo additions Fulltext Access 11 Pages 2008
Corrosion and passivation of low-temperature nitrided AISI 304L and 316L stainless steels in acidified sodium sulphate solution Fulltext Access 11 Pages 2008
Inhibition effect of nonionic surfactant on the corrosion of cold rolled steel in hydrochloric acid Fulltext Access 11 Pages 2008
Stainless steel ennoblement in freshwater: From exposure tests to mechanisms Fulltext Access 11 Pages 2008
Electrochemical characteristics of zirconium oxide treated Type 304 stainless steels of different surface oxide structures in high temperature water Fulltext Access 11 Pages 2008
Characterisation of anodic layers on Cu–10Sn bronze (RDE) in aerated NaCl solution Fulltext Access 11 Pages 2008
Shear deformation and plasticity of metallic glass under multiaxial loading Fulltext Access 11 Pages 2008
Comparison of susceptibility to pitting corrosion of AA2024-T4, AA7075-T651 and AA7475-T761 aluminium alloys in neutral chloride solutions using electrochemical noise analysis Fulltext Access 11 Pages 2008
Modelling of phosphate inhibition of copper corrosion in aqueous chloride and sulphate media Fulltext Access 11 Pages 2008
Corrosion behaviour of Lotus-type porous high nitrogen nickel-free stainless steels Fulltext Access 11 Pages 2008
Synthesis and evaluation of new long alkyl side chain acetamide, isoxazolidine and isoxazoline derivatives as corrosion inhibitors Fulltext Access 11 Pages 2008
Electrochemical studies of packed iron powder electrodes: Effects of common constituents of natural waters on corrosion potential Fulltext Access 11 Pages 2008
Application of EIS to cathodically protected steel: Tests in sodium chloride solution and in chloride contaminated concrete Fulltext Access 11 Pages 2008
Effects of acid type on corrosion and fracture behavior of Ni–Ti superelastic alloy under sustained tensile load in physiological saline solution containing hydrogen peroxide Fulltext Access 11 Pages 2008
Influence of pH and chloride ion concentration on the corrosion of Mg alloy ZE41 Fulltext Access 11 Pages 2008
Role of Cl− and NO3- ions on the corrosion behavior of 20% SiCp reinforced 6061-Al metal matrix composite: A correlation between electrochemical studies and atomic force microscopy Fulltext Access 11 Pages 2008
Synergistic inhibition effect of rare earth cerium(IV) ion and anionic surfactant on the corrosion of cold rolled steel in H2SO4 solution Fulltext Access 11 Pages 2008
Texture heterogeneities induced by subtransus processing of near α titanium alloys Fulltext Access 11 Pages 2008
Multiscale wear of plasma-sprayed carbon-nanotube-reinforced aluminum oxide nanocomposite coating Fulltext Access 11 Pages 2008
Martensitic transformation and microstructure of Ti-rich Ti-Ni as-atomized powders Fulltext Access 11 Pages 2008
Atomistic simulations of diffusional creep in a nanocrystalline body-centered cubic material Fulltext Access 11 Pages 2008
Tensile properties of nanocrystalline tantalum from molecular dynamics simulations Fulltext Access 11 Pages 2008
Dislocation interaction with C in α-Fe: A comparison between atomic simulations and elasticity theory Fulltext Access 11 Pages 2008
Shear mechanisms at 0–50% solid during equiaxed dendritic solidification of an AZ91 magnesium alloy Fulltext Access 11 Pages 2008
Structure-phase morphology - Property relationship of a series of light-emitting alternating copolymers with distyrylbenzenes segments and oligo(ethylene oxide) spacers Fulltext Access 11 Pages 2008
Structural investigations of Fe–Ga alloys: Phase relations and magnetostrictive behavior Fulltext Access 11 Pages 2008
On the influence of void clusters on void growth and coalescence during ductile fracture Fulltext Access 11 Pages 2008
Multiscale simulation of onset plasticity during nanoindentation of Al (0 0 1) surface Fulltext Access 11 Pages 2008
A three-phase simulation of the effect of microstructural features on semi-solid tensile deformation Fulltext Access 11 Pages 2008
Study on the solid solubility extension of Mo in Cu by mechanical alloying Cu with amorphous Cr(Mo) Fulltext Access 11 Pages 2008
Quantification of hydrothermal degradation in zirconia by nanoindentation Fulltext Access 11 Pages 2008
Characterization studies of pulse magnetron sputtered hard ceramic titanium diboride coatings alloyed with silicon Fulltext Access 11 Pages 2008
On the mechanism of material removal in electrochemical spark machining of quartz under different polarity conditions Fulltext Access 11 Pages 2008
Experimental evaluation of strains in the tension–compression using a new tool geometry, X-Die Fulltext Access 11 Pages 2008
Experimental study of the features of the kerf generated by a 200 A high tolerance plasma arc cutting system Fulltext Access 11 Pages 2008
Drawing of CCCT diagrams by static deformation and consideration deformation effect on martensite and bainite transformation in NiCrMoV steel Fulltext Access 11 Pages 2008
Artificial neural network modeling of weld joint strength prediction of a pulsed metal inert gas welding process using arc signals Fulltext Access 11 Pages 2008
Thermoresponsive meso/nanostructured thermosetting materials based on PS-b-PEO block copolymer-dispersed liquid crystal: Curing behavior and morphological variation Fulltext Access 11 Pages 2008
Microstructure and electrical conductivity of nanocrystalline nickel- and nickel oxide/gadolinia-doped ceria thin films Fulltext Access 11 Pages 2008
Fabrication and electrochemical characterization of planar Pt–CGO microstructures Fulltext Access 11 Pages 2008
Grain-boundary structure and microstructure development mechanism in 2–8 mol% yttria-stabilized zirconia polycrystals Fulltext Access 11 Pages 2008
Atomistic simulations of the shear strength and sliding mechanisms of copper–niobium interfaces Fulltext Access 11 Pages 2008
Cube texture in hot-rolled aluminum alloy 1050 (AA1050)—nucleation and growth behavior Fulltext Access 11 Pages 2008
Interface structure and properties of a brass-reinforced Ni59Zr20Ti16Si2Sn3 bulk metallic glass composite Fulltext Access 11 Pages 2008
Fatigue damage initiation and growth from artificial defects in Zr-based metallic glass Fulltext Access 11 Pages 2008
The effect of nanocrystallization and free volume on the room temperature plasticity of Zr-based bulk metallic glasses Fulltext Access 11 Pages 2008
Chemical aspects of plasma spraying of zirconia-based thermal barrier coatings Fulltext Access 11 Pages 2008
Titanium with controllable pore fractions by thermoreversible gelcasting of TiH2 Fulltext Access 11 Pages 2008
Numerical modeling of self-pierce riveting—From riveting process modeling down to structural analysis Fulltext Access 11 Pages 2008
Origins of stress development during metal-induced crystallization and layer exchange: Annealing amorphous Ge/crystalline Al bilayers Fulltext Access 11 Pages 2008
Initiation and growth of damage in a dual-phase steel observed by X-ray microtomography Fulltext Access 11 Pages 2008
On cracks and delaminations of thermal barrier coatings due to indentation testing: Experimental investigations Fulltext Access 11 Pages 2008
Atomic mobilities, diffusivities and simulation of diffusion growth in the Co–Si system Fulltext Access 11 Pages 2008
Spectral representation of higher-order localization relationships for elastic behavior of polycrystalline cubic materials Fulltext Access 11 Pages 2008
EBSD and FIB/TEM examination of shape memory effect deformation structures in U–14 at.% Nb Fulltext Access 11 Pages 2008
Evolution of lattice strain in Ti–6Al–4V during tensile loading at room temperature Fulltext Access 11 Pages 2008