Analysis of substructure evolution during simple shear of polycrystals by means of a combined viscoplastic self-consistent and disclination modeling approach Fulltext Access 11 Pages 2006
Stress-assisted discontinuous grain growth and its effect on the deformation behavior of nanocrystalline aluminum thin films Fulltext Access 11 Pages 2006
Mechanical behavior and dynamic failure of high-strength ultrafine grained tungsten under uniaxial compression Fulltext Access 11 Pages 2006
On the elastic properties and mechanical damping of Ti3SiC2, Ti3GeC2, Ti3Si0.5Al0.5C2 and Ti2AlC in the 300–1573 K temperature range Fulltext Access 11 Pages 2006
Microstructural evolution of the deformed volume beneath microindents in tungsten and copper Fulltext Access 11 Pages 2006
The localization of plastic flow under dynamic indentation conditions: I. Experimental results Fulltext Access 11 Pages 2006
Simulation and analysis of the migration mechanism of Σ5 tilt grain boundaries in an fcc metal Fulltext Access 11 Pages 2006
Deformation twinning in polycrystalline copper at room temperature and low strain rate Fulltext Access 11 Pages 2006
A phase-field simulation of austenite to ferrite transformation kinetics in low carbon steels Fulltext Access 11 Pages 2006
Microstructural evolution of rheo-diecast AZ91D magnesium alloy during heat treatment Fulltext Access 11 Pages 2006
A modified embedded-atom method interatomic potential for the Fe–C system Fulltext Access 11 Pages 2006
Thermal shock resistance enhancement of functionally graded materials by multiple cracking Fulltext Access 11 Pages 2006
Microstructural length-scale effects in the nanoindentation behavior of thin gold films Fulltext Access 11 Pages 2006
Determining hardness of thin films in elastically mismatched film-on-substrate systems using nanoindentation Fulltext Access 11 Pages 2006
Wettability of polycrystalline rutile TiO2 by molten Al in different atmospheres Fulltext Access 11 Pages 2006
Micromechanical modeling of isotropic elastic behavior of semicrystalline polymers Fulltext Access 11 Pages 2006
Load partitioning in aluminum syntactic foams containing ceramic microspheres Fulltext Access 11 Pages 2006
Phase stability and structural relations of nanometer-sized, matrix-embedded precipitate phases in Al–Mg–Si alloys in the late stages of evolution Fulltext Access 11 Pages 2006
Effect of nitrogen on generalized stacking fault energy and stacking fault widths in high nitrogen steels Fulltext Access 11 Pages 2006
Diffusion and creep in multi-component alloys with non-ideal sources and sinks for vacancies Fulltext Access 11 Pages 2006
Texture and microtexture development in an Al–3Mg–Sc(Zr) alloy deformed by triaxial forging Fulltext Access 11 Pages 2006
Effect of stress and strain state on heterogeneous coarsening in Sn-Pb solder Fulltext Access 11 Pages 2006
Microscopic deformation mechanism of a Ti66.1Nb13.9Ni4.8Cu8Sn7.2 nanostructure–dendrite composite Fulltext Access 11 Pages 2006
Effect of rolling deformation on the microstructure of bulk Cu60Zr20Ti20 metallic glass and its crystallization Fulltext Access 11 Pages 2006
Laser-enhanced diffusion of nitrogen and aluminum dopants in silicon carbide Fulltext Access 11 Pages 2006
Modeling of the effect of the β phase deformation on the α phase precipitation in near-β titanium alloys Fulltext Access 11 Pages 2006
The nature of A1–L10 ordering transitions in alloy nanoparticles: A Monte Carlo study Fulltext Access 11 Pages 2006
Anisotropic yield function of hexagonal materials taking into account texture development and anisotropic hardening Fulltext Access 11 Pages 2006
Processing by mechanosynthesis and properties of piezoelectric Pb(Mg1/3Nb2/3)O3–PbTiO3 with different compositions Fulltext Access 11 Pages 2006
A phase-field model for computer simulation of lamellar structure formation in γ-TiAl Fulltext Access 11 Pages 2006
Macroscopic and microscopic aspects of the deformation and fracture mechanisms of ultrafine-grained aluminum processed by hot isostatic pressing Fulltext Access 11 Pages 2006
Effect of off-stoichiometry on the mobility of point-like defects and damping in binary Cu–Al martensites Fulltext Access 11 Pages 2006
Thermodynamics of open two-phase systems with coherent interfaces: Application to metal–hydrogen systems Fulltext Access 11 Pages 2006
Simplified prediction of the monotonic uniaxial stress-strain curve of non-linear particulate composites Fulltext Access 11 Pages 2006
The effects of dislocation patterns on the dissolution process of polycrystalline nickel Fulltext Access 11 Pages 2006
A dislocation density based constitutive model for crystal plasticity FEM including geometrically necessary dislocations Fulltext Access 11 Pages 2006
Plane strain indentation of a Zr-based metallic glass: Experiments and numerical simulation Fulltext Access 11 Pages 2006
Semiconductive properties of titanium anodic oxide films in McIlvaine buffer solution Fulltext Access 12 Pages 2006
Elaboration of a test method for the study of metal release from stainless steel particles in artificial biological media Fulltext Access 12 Pages 2006
Fatigue crack growth mechanisms at the microstructure scale in Al–Si–Mg cast alloys: Mechanisms in the near-threshold regime Fulltext Access 12 Pages 2006
Determination of Tafel slopes from coulostatically induced transients using an integral algorithm Fulltext Access 12 Pages 2006
Characteristics and lacquer adhesion on dip and CDC chromium passivated tinplate Fulltext Access 12 Pages 2006
Corrosion behavior of ferritic–martensitic steel T91 in supercritical water Fulltext Access 12 Pages 2006
Thermodynamic properties of 2,5-bis(4-methoxyphenyl)-1,3,4-oxadiazole as a corrosion inhibitor for mild steel in normal sulfuric acid medium Fulltext Access 12 Pages 2006
Computational simulations of the molecular structure and corrosion properties of amidoethyl, aminoethyl and hydroxyethyl imidazolines inhibitors Fulltext Access 12 Pages 2006
Investigation on some Schiff bases as corrosion inhibitors for mild steel Fulltext Access 12 Pages 2006
Novel corrosion experiments using the wire beam electrode. (IV) Studying localised anodic dissolution of aluminium Fulltext Access 12 Pages 2006
Creep densification behavior of micro and nano metal powder: Grain size-dependent model Fulltext Access 12 Pages 2006
Dynamic observations and atomistic simulations of dislocation–defect interactions in rapidly quenched copper and gold Fulltext Access 12 Pages 2006
Crystallography of SiC/MgAl2O4/Al interfaces in a pre-oxidized SiC reinforced SiC/Al composite Fulltext Access 12 Pages 2006
Composition evolution of nanoscale Al3Sc precipitates in an Al–Mg–Sc alloy: Experiments and computations Fulltext Access 12 Pages 2006
Modeling work hardening of pearlitic steels by phenomenological and Taylor-type micromechanical models Fulltext Access 12 Pages 2006
Ductility of bulk metallic glasses and their composites with ductile reinforcements: A numerical study Fulltext Access 12 Pages 2006
Microstructure evolution in dual-phase stainless steel during severe deformation Fulltext Access 12 Pages 2006
Three-dimensional phase field modelling of the austenite-to-ferrite transformation Fulltext Access 12 Pages 2006
Texture analysis of a friction stir processed 6061-T6 aluminum alloy using neutron diffraction Fulltext Access 12 Pages 2006
A quasi-three-dimensional approach to modeling and analysis of a constrained piezoelectric thin film Fulltext Access 12 Pages 2006
Flow stress anisotropy and Bauschinger effect in ultrafine grained copper Fulltext Access 12 Pages 2006
Strength, strain-rate sensitivity and ductility of copper with nanoscale twins Fulltext Access 12 Pages 2006
Effect of a high axial magnetic field on the microstructure in a directionally solidified Al–Al2Cu eutectic alloy Fulltext Access 12 Pages 2006
Response of NiTi shape memory alloy at high strain rate: A systematic investigation of temperature effects on tension–compression asymmetry Fulltext Access 12 Pages 2006
Threshold stress superplastic behavior and dislocation activity in a three-phase alumina–zirconia–mullite composite Fulltext Access 12 Pages 2006
A granular model of equiaxed mushy zones: Formation of a coherent solid and localization of feeding Fulltext Access 12 Pages 2006
Characterization of the microstructure and texture of nanostructured electrodeposited NiCo using electron backscatter diffraction (EBSD) Fulltext Access 12 Pages 2006
Validating a polycrystal model for the elastoplastic response of magnesium alloy AZ31 using in situ neutron diffraction Fulltext Access 12 Pages 2006
Uniaxial tensile plastic deformation and grain growth of bulk nanocrystalline alloys Fulltext Access 12 Pages 2006
Diffusion on grain boundary networks: Percolation theory and effective medium approximations Fulltext Access 12 Pages 2006
Nonequilibrium solid phases studied by thermodynamic calculation, molecular dynamics simulation, ab initio calculation and ion-beam manipulation in an immiscible Au–Co system at equilibrium Fulltext Access 12 Pages 2006
Non-isothermal tensile tests during solidification of Al–Mg–Si–Cu alloys: Mechanical properties in relation to the phenomenon of hot tearing Fulltext Access 12 Pages 2006
Deformation behavior of ultrafine-grain (UFG) AZ31B Mg alloy at room temperature Fulltext Access 12 Pages 2006
Production of ultrafine-grain microstructure in Mg alloy by alternate biaxial reverse corrugation Fulltext Access 12 Pages 2006
The effect of strain heterogeneity on the work hardening of polycrystals predicted by mean-field approaches Fulltext Access 12 Pages 2006
Evolution of microstructure and deformation resistance in creep of tempered martensitic 9–12%Cr–2%W–5%Co steels Fulltext Access 12 Pages 2006
Microstructural kinetics of phase transformations during electrochemical reduction of titanium dioxide in molten calcium chloride Fulltext Access 12 Pages 2006
Strain hardening behaviour and deformation kinetics of Cu deformed by equal channel angular extrusion from 1 to 16 passes Fulltext Access 12 Pages 2006
Correlation of nanoindentation measurements of nickel made using geometrically different indenter tips Fulltext Access 12 Pages 2006
Fatigue crack propagation: In situ visualization using X-ray microtomography and 3D simulation using the extended finite element method Fulltext Access 12 Pages 2006
Numerical modelling of thin-walled hypereutectic ductile cast iron parts Fulltext Access 12 Pages 2006
Evolution of magnetic domain structures and coercivity in high-performance SmCo 2:17-type permanent magnets Fulltext Access 12 Pages 2006
Hot corrosion behaviour of HVOF-sprayed NiCrBSi coatings on Ni- and Fe-based superalloys in Na2SO4–60% V2O5 environment at 900 °C Fulltext Access 12 Pages 2006
Mechanical fatigue of polysilicon: Effects of mean stress and stress amplitude Fulltext Access 12 Pages 2006
Temperature-dependent strain rate sensitivity and activation volume of nanocrystalline Ni Fulltext Access 12 Pages 2006
Epitaxy and bonding of Cu films on oxygen-terminated α-Al2O3(0 0 0 1) surfaces Fulltext Access 12 Pages 2006
A maximum entropy approach for property prediction of random microstructures Fulltext Access 12 Pages 2006
Creation of semisolid slurries containing fine and spherical particles by grain refinement based on the Mullins–Sekerka stability criterion Fulltext Access 12 Pages 2006
Stress-induced martensitic transformations and shape memory at nanometer scales Fulltext Access 12 Pages 2006
Temporal evolution of the nanostructure and phase compositions in a model Ni–Al–Cr alloy Fulltext Access 12 Pages 2006