Nano-scale chemical analyses of passivated surface layer on stainless steels Fulltext Access 12 Pages 2006
The effect of long term exposure in oxidising and corroding environments on the tensile properties of two gamma-TiAl alloys Fulltext Access 12 Pages 2006
Texture evolution of the γ- and the α/α2-phase during hot rolling of γ-TiAl based alloys Fulltext Access 12 Pages 2006
Application of image analysis and image simulation for quantitative characterization of scale spallation during cyclic oxidation of a Pt-aluminide coating Fulltext Access 12 Pages 2006
COUPLED SIMULATION OF 3D ELECTRO-MAGNETO-FLOW FIELD IN HALL-HEROULT CELLS USING FINITE ELEMENT METHOD Fulltext Access 12 Pages 2006
Influence of pre-oxidation on the hot corrosion of Ti3SiC2 in the mixture of Na2SO4–NaCl melts Fulltext Access 12 Pages 2006
Comparative study of bis-piperidiniummethyl-urea and mono-piperidiniummethyl-urea as volatile corrosion inhibitors for mild steel Fulltext Access 12 Pages 2006
Modeling the relationship between microstructural features and the strength of WC-Co composites Fulltext Access 12 Pages 2006
Effects of alloy and solution chemistry on the fracture of passive films on austenitic stainless steel Fulltext Access 12 Pages 2006
Grain size effects on the SCC susceptibility of a nitrogen steel in hot NaCl solutions Fulltext Access 12 Pages 2006
Delaminated areas beneath organic coating: A local electrochemical impedance approach Fulltext Access 12 Pages 2006
Corrosion processes and their influence on the magnetic flux density of FeNbCuSiB alloys Fulltext Access 12 Pages 2006
The electrochemical behaviour of the bright chromium deposits plated with direct- and pulse-current in 1 M H2SO4 Fulltext Access 12 Pages 2006
The effect of 180 °C-annealing on the electrochemical behavior of nano-thick zinc-electroplated copper in aqueous solutions with different pH Fulltext Access 12 Pages 2006
Effect of La2O3 on corrosion resistance of laser clad ferrite-based alloy coatings Fulltext Access 12 Pages 2006
Passivity breakdown on AISI Type 403 stainless steel in chloride-containing borate buffer solution Fulltext Access 12 Pages 2006
Direction-dependent grain interaction in nickel and copper thin films, analysed by X-ray diffraction Fulltext Access 12 Pages 2006
On the development of microstructure and texture heterogeneity in ECAE via route C Fulltext Access 12 Pages 2006
Investigation of orientation gradients around a hard Laves particle in a warm-rolled Fe3Al-based alloy using a 3D EBSD-FIB technique Fulltext Access 12 Pages 2006
Crystallographic relations between face- and body-centred cubic crystals formed under near-equilibrium conditions: Observations from the Gibeon meteorite Fulltext Access 12 Pages 2006
Performance comparison of AlTiC and AlTiB master alloys in grain refinement of commercial and high purity aluminum Fulltext Access 12 Pages 2006
Polymer Bonded Anisotropic Thick Hard Films for Micromotors/Microgenerators Fulltext Access 12 Pages 2006
Phase Stability, Structural and Magnetic Characteristics of Novel R(Co,M) 1:7 Type Intermetallics Fulltext Access 12 Pages 2006
Interference by cerium cations during the multi-step zinc dissolution process in a chloride-containing electrolyte Fulltext Access 12 Pages 2006
Comparative studies of the decomposition of alanates followed by in situ XRD and DSC methods Fulltext Access 12 Pages 2006
Electrochemical hydrogen storage in MgSc alloys: A comparative study between thin films and bulk materials Fulltext Access 12 Pages 2006
Sequestering ability of polyaminopolycarboxylic ligands towards dioxouranium(VI) cation Fulltext Access 12 Pages 2006
Cellular growth during transient directional solidification of Pb-Sb alloys Fulltext Access 12 Pages 2006
The influence of oxide thickness on the early stages of the massive uranium–hydrogen reaction Fulltext Access 12 Pages 2006
Statistical model of sphalerite structured quaternary A1âxBxYyZ1ây systems Fulltext Access 12 Pages 2006
An assessment of finite element software for application to the roll-forming process Fulltext Access 12 Pages 2006
Modeling of turbulent heat transfer during the solidification process of continuous castings Fulltext Access 12 Pages 2006
Characterization of the strain-induced plastic anisotropy of rolled sheets by using sequences of simple shear and uniaxial tensile tests Fulltext Access 12 Pages 2006
Criteria on feeding system design: Conventional and sequential injection moulding Fulltext Access 12 Pages 2006
Studies on the behaviour of stellite-6 as plasma sprayed and laser remelted coatings in molten salt environment at 900 °C under cyclic conditions Fulltext Access 12 Pages 2006
Reduction of thermally induced stress in a solid disk heated with radially periodic expanding and contracting ring heat flux Fulltext Access 12 Pages 2006
Morphology and thermal conductivity of yttria-stabilized zirconia coatings Fulltext Access 13 Pages 2006
Comparison of the degradation behaviour of fusion-bonded epoxy powder coating systems under flowing and static immersion Fulltext Access 13 Pages 2006
Corrosion inhibition by chromate and phosphate extracts for iron substrates studied by EIS and SVET Fulltext Access 13 Pages 2006
Corrosion behaviour and structure of the surface layer formed on austempered ductile iron in concentrated sulphuric acid Fulltext Access 13 Pages 2006
Direct, static measurement of single-crystal Young’s moduli of the zeolite natrolite: Comparison with dynamic studies and simulations Fulltext Access 13 Pages 2006
Effect of electrolyte composition on the active-to-passive transition behavior of 2205 duplex stainless steel in H2SO4/HCl solutions Fulltext Access 13 Pages 2006
Thermodynamic modeling of the Ca–Sn system based on finite temperature quantities from first-principles and experiment Fulltext Access 13 Pages 2006
Experimental and numerical investigations of the effects of the spatial distribution of α phase on fracture behavior in hypoeutectic Al–Si alloys Fulltext Access 13 Pages 2006
Residual stresses, strength and toughness of laminates with different layer thickness ratios Fulltext Access 13 Pages 2006
Phase and microstructural evolution of Ir-Si binary alloys with fcc/silicide structure Fulltext Access 13 Pages 2006
Growth, structure, and tribological behavior of atomic layer-deposited tungsten disulphide solid lubricant coatings with applications to MEMS Fulltext Access 13 Pages 2006
Desktop paper recycling: A survey of novel technologies that might recycle office paper within the office Fulltext Access 13 Pages 2006
Effect of residual stresses on individual phase mechanical properties of austeno-ferritic duplex stainless steel Fulltext Access 13 Pages 2006
Low-temperature plasticity and flow-stress behaviour of strontium titanate single crystals Fulltext Access 13 Pages 2006
Fine-scale microstructural investigations of warm rolled low-carbon steels with and without Cr, P, and B additions Fulltext Access 13 Pages 2006
Prediction of residual stresses in quenched aluminum blocks and their reduction through cold working processes Fulltext Access 13 Pages 2006
The optimisation of energy consumption and time in colour pigment grinding with pearl mills Fulltext Access 13 Pages 2006
Practical numerical analysis of a crack near a weld subjected to primary loading and hydrogen embrittlement Fulltext Access 13 Pages 2006
Wire drawing and coating using a combined geometry hydrodynamic unit: Theory and experiment Fulltext Access 13 Pages 2006
Microstructural evolution in the friction stir welded 6061 aluminum alloy (T6-temper condition) to copper Fulltext Access 13 Pages 2006
Corrosion protection of Zn-phosphate containing water borne dispersion coatings on steel: Part 1: Design and analysis of model water based latex films on iron substrates Fulltext Access 13 Pages 2006
Factors that influence the release of metals from stainless steels exposed to physiological media Fulltext Access 13 Pages 2006
3D computer simulation of the influence of microstructure on the cut edge corrosion behaviour of a zinc aluminium alloy galvanized steel Fulltext Access 13 Pages 2006
A SEM/XPS/SKP study on the distribution of chlorides in contaminated rusty steel Fulltext Access 13 Pages 2006
Perchlorate pitting corrosion of tin in Na2CO3 solutions and effect of some inorganic inhibitors Fulltext Access 13 Pages 2006
The inhibition of mild steel corrosion in acidic solutions by 2,5-bis(4-pyridyl)-1,3,4-thiadiazole: Structure-activity correlation Fulltext Access 13 Pages 2006
Mechanical properties of an iron oxide formed by corrosion in reinforced concrete structures Fulltext Access 13 Pages 2006
Preparation of a 16-hydroxyhexadecanoate ion self-assembled monolayer on a zinc electrode coated with hydrated cerium(III) oxide Fulltext Access 13 Pages 2006
Quantitative determination of corrosion products and adsorbed water on copper in humid air containing SO2 by IR-RAS measurements Fulltext Access 13 Pages 2006
The corrosion behavior of Cu–Al and Cu–Al–Be shape-memory alloys in 0.5 M H2SO4 solution Fulltext Access 13 Pages 2006
Studies on enhancement of surface durability for steel surface by camphor oil modified epoxy polyamide coating Fulltext Access 13 Pages 2006
Laboratory-scale performance of a binary Cu–Al alloy as an anode for aluminium electrowinning Fulltext Access 13 Pages 2006
Analysis of a complex electrochemical process: The anodic dissolution and passivation of cobalt in H2CO3/HCO3-/CO32- aqueous media near neutral pH Fulltext Access 13 Pages 2006
Hydrogen entry into pipeline steel under freely corroding conditions in two corroding media Fulltext Access 13 Pages 2006
Adsorption of 3-(4-amino-2-methyl-5-pyrimidyl methyl)-4-methyl thiazolium chloride on mild steel Fulltext Access 13 Pages 2006
Turning of glass–fiber reinforced plastics materials with chamfered main cutting edge carbide tools Fulltext Access 13 Pages 2006
Hydrogen embrittlement susceptibility and permeability of two ultra-high strength steels Fulltext Access 13 Pages 2006
Testing of high temperature reference electrodes for light water reactor applications Fulltext Access 13 Pages 2006
Shrinkage and disappearance of a closed pore in the sintering of particle cluster Fulltext Access 13 Pages 2006
Extreme value models for the assessment of steels containing multiple types of inclusion Fulltext Access 13 Pages 2006
Electrochemical impedance spectroscopy and cyclic voltammetry study of carbon-alloyed iron aluminides in sulfuric acid Fulltext Access 13 Pages 2006
Computer simulations of realistic microstructures of discontinuously reinforced aluminum alloy (DRA) composites Fulltext Access 13 Pages 2006
Potentiostatic study of reinforcing steel in chloride contaminated concrete powder solution extracts Fulltext Access 13 Pages 2006
Three-dimensional analysis of particle coarsening in high volume fraction solid–liquid mixtures Fulltext Access 13 Pages 2006
Influence of annealing on electrochromic performance of template assisted, electrochemically grown, nanostructured assembly of tungsten oxide Fulltext Access 13 Pages 2006