Fullerene composite proton conducting membranes for polymer electrolyte fuel cells operating under low humidity conditions Fulltext Access 11 Pages 2006
Grand canonical Monte Carlo and non-equilibrium molecular dynamics simulation study on the selective adsorption and fluxes of oxygen/nitrogen gas mixtures through carbon membranes Fulltext Access 11 Pages 2006
Separation of gasoline vapor from nitrogen by hollow fiber composite membranes for VOC emission control Fulltext Access 11 Pages 2006
Quantifying the shear at the surface of submerged hollow fiber membranes Fulltext Access 11 Pages 2006
Preparing highly porous chitosan/cellulose acetate blend hollow fibers as adsorptive membranes: Effect of polymer concentrations and coagulant compositions Fulltext Access 11 Pages 2006
Effect of membrane fouling on transport of organic contaminants in NF/RO membrane applications Fulltext Access 11 Pages 2006
Diffusive tortuosity factor of solid and soft cake layers: A random walk simulation approach Fulltext Access 11 Pages 2006
Three-dimensional pore connectivity in bi-axially stretched microporous composite membranes Fulltext Access 11 Pages 2006
Membrane formation via thermally induced phase separation (TIPS): Model development and validation Fulltext Access 11 Pages 2006
Hollow fiber membrane contactor for air humidity control: Modules and membranes Fulltext Access 11 Pages 2006
Development of a supported liquid membrane process for separating enantiomers of N-protected amino acid derivatives Fulltext Access 11 Pages 2006
An automated microscale technique for the quantitative and parallel analysis of microfiltration operations Fulltext Access 11 Pages 2006
Enhanced Matrimid membranes for pervaporation by homogenous blends with polybenzimidazole (PBI) Fulltext Access 11 Pages 2006
Partitioning of organic solutes between water and polyamide layer of RO and NF membranes: Correlation to rejection Fulltext Access 11 Pages 2006
Pervaporation-assisted esterification of lactic and succinic acids with downstream ester recovery Fulltext Access 11 Pages 2006
Size control of nanobubbles generated from Shirasu-porous-glass (SPG) membranes Fulltext Access 11 Pages 2006
Membrane-based solvent extraction of aroma compounds: Choice of configurations of hollow fiber modules based on experiments and simulation Fulltext Access 11 Pages 2006
Effect of PVDF dope rheology on the structure of hollow fiber membranes used for CO2 capture Fulltext Access 11 Pages 2006
Nanocomposite MFI-alumina membranes via pore-plugging synthesis: Preparation and morphological characterisation Fulltext Access 11 Pages 2006
Influence of heat-treatment on CO2 separation performance of novel fixed carrier composite membranes prepared by interfacial polymerization Fulltext Access 11 Pages 2006
Microstructure evolution in dry cast cellulose acetate membranes by cryo-SEM Fulltext Access 11 Pages 2006
Effects of heat treatment on the erosion behavior of austempered ductile irons Fulltext Access 11 Pages 2006
Erosive–corrosive wear of aluminum alloy composites: Influence of slurry composition and speed Fulltext Access 11 Pages 2006
Effects of Sr and Sb modifiers on the sliding wear behavior of A357 alloy under varying pressure and speed conditions Fulltext Access 11 Pages 2006
Phosphorus-containing oligoamides obtained by a novel one-pot degradation of polyamide-6 Fulltext Access 11 Pages 2006
Degradation and stabilisation of poly(ethylene-stat-vinyl acetate): 1 - Spectroscopic and rheological examination of thermal and thermo-oxidative degradation mechanisms Fulltext Access 11 Pages 2006
Pyrolysis mass spectrometry analysis of poly(vinyl acetate), poly(methyl methacrylate) and their blend coalesced from inclusion compounds formed with γ-cyclodextrin Fulltext Access 11 Pages 2006
Mechanism of glycolysis of nylon 6,6 and its model compound by ethylene glycol Fulltext Access 11 Pages 2006
Sugar end-capped polyethylene: Ceric ammonium nitrate initiated oxidation and melt phase grafting of glucose onto polyethylene and its microbial degradation Fulltext Access 11 Pages 2006
Effects of hydrolysis-induced molecular weight changes on the phase separation of a polyester polyurethane Fulltext Access 11 Pages 2006
Influence of copper-phthalocyanine on the photodegradation of polycarbonate Fulltext Access 11 Pages 2006
Unexplored capabilities of chemiluminescence and thermoanalytical methods in characterization of intact and degraded hyaluronans Fulltext Access 11 Pages 2006
Identification of polymer additives by liquid chromatography-mass spectrometry Fulltext Access 11 Pages 2006
Photochemical aging of in situ polymerized blends of polystyrene and poly[acrylonitrile-g-(ethylene-co-propylene-co-diene)-g-styrene] (AES) Fulltext Access 11 Pages 2006
Colour formation in poly(ethylene terephthalate) during melt processing Fulltext Access 11 Pages 2006
Thermal yellowing sensitised by pre-photo-oxidation of non-deacidified paper Fulltext Access 11 Pages 2006
Surface properties and enzymatic degradation of end-capped poly(l-lactide) Fulltext Access 11 Pages 2006
Biodegradability of bio-flour filled biodegradable poly(butylene succinate) bio-composites in natural and compost soil Fulltext Access 11 Pages 2006
Rapid measurement of polymer photo-degradation by FTIR spectrometry of evolved carbon dioxide Fulltext Access 11 Pages 2006
Influence of isocyanate type of acrylated urethane oligomer and of additives on weathering of UV-cured films Fulltext Access 11 Pages 2006
The effect of γ-irradiation and polymer composition on the stability of PLG polymer and microspheres Fulltext Access 11 Pages 2006
Lifetime predictions for semi-crystalline cable insulation materials: I. Mechanical properties and oxygen consumption measurements on EPR materials Fulltext Access 11 Pages 2006
Effect of acrylic polymer and nanocomposite with nano-SiO2 on thermal degradation and fire resistance of APP-DPER-MEL coating Fulltext Access 11 Pages 2006
Thermal behavior and degradation mechanism of poly(bisphenyl acryloxyethyl phosphate) as a UV curable flame-retardant oligomer Fulltext Access 11 Pages 2006
Multi-component analysis of low-density polyethylene oxidative degradation Fulltext Access 11 Pages 2006
Study of the thermal decomposition of flame-retarded unsaturated polyester resins by thermogravimetric analysis and Py-GC/MS Fulltext Access 11 Pages 2006
Charge generation and photovoltaic properties of hybrid solar cells based on ZnO and copper phthalocyanines (CuPc) Fulltext Access 11 Pages 2006
Comparison of wear properties of tool steels AISI D2 and O1 with the same hardness Fulltext Access 11 Pages 2006
Design of experiments approach to the study of tribological performance of Cu-concentrate-filled PPS composites Fulltext Access 11 Pages 2006
Optimal orientation of reinforcing fibers in a shell made of fibrous composites Fulltext Access 11 Pages 2006
Texturization of multicrystalline silicon wafers for solar cells by chemical treatment using metallic catalyst Fulltext Access 11 Pages 2006
Investigation of various surface passivation schemes for silicon solar cells Fulltext Access 11 Pages 2006
Annual output estimation of concentrator photovoltaic systems using high-efficiency InGaP/InGaAs/Ge triple-junction solar cells based on experimental solar cell's characteristics and field-test meteorological data Fulltext Access 11 Pages 2006
An optimum design of antireflection coating for spherical silicon solar cells Fulltext Access 11 Pages 2006
Electrochemical reaction rates in a dye-sensitised solar cell—the iodide/tri-iodide redox system Fulltext Access 11 Pages 2006
A novel UV-mediated low-temperature sintering of TiO2 for dye-sensitized solar cells Fulltext Access 11 Pages 2006
About the relevance of roughness parameters used for characterizing worn femoral heads Fulltext Access 11 Pages 2006
Hybrid solar cells based on MEH-PPV and thin film semiconductor oxides (TiO2, Nb2O5, ZnO, CeO2 and CeO2–TiO2): Performance improvement during long-time irradiation Fulltext Access 11 Pages 2006
Semiconducting properties of the anodic films grown over PbIn alloy electrodes Fulltext Access 11 Pages 2006
Influence of additives on thermal conductivity of shape-stabilized phase change material Fulltext Access 11 Pages 2006
Promotion of electrochromism in spray-deposited molybdenum oxide-doped iridium oxide thin films Fulltext Access 11 Pages 2006
Intercalation studies on electron beam evaporated MoO3 films for electrochemical devices Fulltext Access 11 Pages 2006
A novel low cost texturization method for large area commercial mono-crystalline silicon solar cells Fulltext Access 11 Pages 2006
Physical properties of ZnO:F obtained from a fresh and aged solution of zinc acetate and zinc acetylacetonate Fulltext Access 11 Pages 2006
Modeling and simulation of surface roughness in magnetorheological abrasive flow finishing (MRAFF) process Fulltext Access 11 Pages 2006
Wear behaviour of A356/25SiCp aluminium matrix composites sliding against automobile friction material Fulltext Access 11 Pages 2006
Digital filtering methodology used to reduce scale of measurement effects in roughness parameters for magnetic storage supersmooth hard disks Fulltext Access 11 Pages 2006
Studies on erosion behaviour of plasma sprayed coatings on a Ni-based superalloy Fulltext Access 11 Pages 2006
Influence of orientation and volume fraction of Aramid fabric on abrasive wear performance of polyethersulfone composites Fulltext Access 11 Pages 2006
Influence of particle content and porosity on the wear behaviour of cast in situ Al(Mn)–Al2O3(MnO2) composite Fulltext Access 11 Pages 2006
Solid particle erosion behaviour of hardfacing deposits on cast iron-Influence of deposit microstructure and erodent particles Fulltext Access 11 Pages 2006
The role of plastic anisotropy deformation in fretting wear predictions Fulltext Access 11 Pages 2006
Three-dimensional finite element modelling of the scratch test for a TiN coated titanium alloy substrate Fulltext Access 11 Pages 2006
p-doped μc-Si:H window layers prepared by hot-wire CVD for amorphous solar cell application Fulltext Access 11 Pages 2006
Scratching of a coated polymer and mechanical analysis of a scratch resistance solution Fulltext Access 11 Pages 2006
Numerical analysis of journal bearings lubricated with micropolar fluids including thermal and cavitating effects Fulltext Access 11 Pages 2006
Observation of delamination wear of lubricious tribofilm formed on Si3N4 during sliding against WC-Co in humidity air Fulltext Access 11 Pages 2006
Dynamic interaction of friction and surface topography in brake systems Fulltext Access 11 Pages 2006
Study of orifice compensated hole-entry hybrid journal bearing considering surface roughness and flexibility effects Fulltext Access 11 Pages 2006
Fretting fatigue and wear damage of structural components in nuclear power stations—Fitness for service and life management perspective Fulltext Access 11 Pages 2006