Mathematical models of diffusion through membranes from spatially distributed sources Fulltext Access 12 Pages 2006
Optimization of the membrane and pore design for micro-machined membranes Fulltext Access 12 Pages 2006
Mass transfer in liquid–liquid membrane-based extraction at small fiber packing fractions Fulltext Access 12 Pages 2006
Determination of biokinetic coefficients of an immersed membrane bioreactor Fulltext Access 12 Pages 2006
Characterization of silicone rubber membrane materials at low temperature and low pressure conditions Fulltext Access 12 Pages 2006
Mass transfer in osmotic membrane distillation of phycocyanin colorant and sweet-lime juice Fulltext Access 12 Pages 2006
Photovoltaic electrodialysis system for brackish water desalination: Modeling of global process Fulltext Access 12 Pages 2006
A new method for the prediction of pore size distribution and MWCO of ultrafiltration membranes Fulltext Access 12 Pages 2006
Pervaporation study of aqueous ethanol solution through zeolite-incorporated multilayer poly(vinyl alcohol) membranes: Effect of zeolites Fulltext Access 12 Pages 2006
Characterization of gel-filled porous membranes using moment-based interpretation of transport measurements Fulltext Access 12 Pages 2006
Microstructural investigation of dense membranes in relation to their gas transport properties Fulltext Access 12 Pages 2006
Concentration of clavulanic acid broths: Influence of the membrane surface charge density on NF operation Fulltext Access 12 Pages 2006
Effects of novel silane modification of zeolite surface on polymer chain rigidification and partial pore blockage in polyethersulfone (PES)–zeolite A mixed matrix membranes Fulltext Access 12 Pages 2006
Hydrolysis of whey protein isolate in a tangential flow filter membrane reactor: I. Characterisation of permeate flux and product recovery by multivariate data analysis Fulltext Access 12 Pages 2006
A study of mass transfer in hollow-fiber membrane contactors—The effect of fiber packing fraction Fulltext Access 12 Pages 2006
Nanofiltration of single and mixture solutions containing anionics and nonionic surfactants below their critical micelle concentrations (CMCs) Fulltext Access 12 Pages 2006
Molecularly imprinted membranes for an improved recognition of biomolecules in aqueous medium Fulltext Access 12 Pages 2006
Gas permeability, diffusivity and solubility of nitrogen, helium, methane, carbon dioxide and formaldehyde in dense polymeric membranes using a new on-line permeation apparatus Fulltext Access 12 Pages 2006
Effect of the hard segment domains on the permeation and separation ability of the polyurethane-based membranes in benzene/cyclohexane separation by pervaporation Fulltext Access 12 Pages 2006
Novel hydrophilic surface modifying macromolecules for polymeric membranes: Polyurethane ends capped by hydroxy group Fulltext Access 12 Pages 2006
Effects of CO2 exposure and physical aging on the gas permeability of thin 6FDA-based polyimide membranes: Part 2. with crosslinking Fulltext Access 12 Pages 2006
Effect of crosslinked chain length in sulfonated polyimide membranes on water sorption, proton conduction, and methanol permeation properties Fulltext Access 12 Pages 2006
Preparation of novel composite membranes for the pervaporation separation of water–acetic acid mixtures Fulltext Access 12 Pages 2006
Separation of organic mixtures by pervaporation using crosslinked and filled rubber membranes Fulltext Access 12 Pages 2006
Fabrication, characterization, and application of a diamond microelectrode for electrochemical measurement of norepinephrine release from the sympathetic nervous system Fulltext Access 12 Pages 2006
Transient analysis of triplet exciton dynamics in amorphous organic semiconductor thin films Fulltext Access 12 Pages 2006
Synthesis and characterization of a new soluble conducting polymer and its electrochromic devices Fulltext Access 12 Pages 2006
Adhesion of construction sealants to polymer foam backer rod used in building construction Fulltext Access 12 Pages 2006
Predicting the residual strength for environmentally degraded adhesive lap joints Fulltext Access 12 Pages 2006
Factors influencing the durability of epoxy adhesion to silane pretreated aluminium Fulltext Access 12 Pages 2006
The effects of surface pretreatment on the cyclic-fatigue characteristics of bonded aluminium-alloy joints Fulltext Access 12 Pages 2006
ToF-SIMS studies of the adsorption of epoxy resin molecules on organosilane-treated aluminium: Adsorption kinetics and adsorption isotherms Fulltext Access 12 Pages 2006
Effect of solvent nature on the interaction of γγ-glycidoxy propyl trimethoxy silane on oxidised aluminium surface: A study by solution chemistry and surface analysis Fulltext Access 12 Pages 2006
Determination of interface fracture toughness of adhesive joint subjected to mixed-mode loading using finite element method Fulltext Access 12 Pages 2006
Bonded joints with composite adherends. Part II. Finite element analysis of joggle lap joints Fulltext Access 12 Pages 2006
Anticorrosive painting for a wide spectrum of marine atmospheres: Environmental-friendly versus traditional paint systems Fulltext Access 12 Pages 2006
Synthesis, characterization and self-crosslinking of glycidyl carbamate functional resins Fulltext Access 12 Pages 2006
Print quality and resistance for water-based flexography on polymer-coated boards: Dependence on ink formulation and substrate pretreatment Fulltext Access 12 Pages 2006
Development of a new experimental method to determine critical pigment–volume–concentrations using impedance spectroscopy Fulltext Access 12 Pages 2006
Epoxy paint failure in B-52 fuel tanks: Part I—Preliminary development of a model for the process Fulltext Access 12 Pages 2006
Compatibility and incompatibility in anticorrosive painting: The particular case of maintenance painting Fulltext Access 12 Pages 2006
Anion transport through polymer inclusion membranes facilitated by transition metal containing carriers Fulltext Access 12 Pages 2006
Intermolecular interactions in target organophilic pervaporation through the films of amorphous Teflon AF2400 Fulltext Access 12 Pages 2006
Performance of an inclined-plate membrane bioreactor at zero excess sludge discharge Fulltext Access 12 Pages 2006
Modification of porous alumina membranes with n-alkanoic acids and their application in protein adsorption Fulltext Access 12 Pages 2006
Passivation and etching of fine-grained polycrystalline silicon films by hydrogen treatment Fulltext Access 12 Pages 2006
Sliding wear of an Al–18.5 wt.% Si alloy tested in an argon atmosphere and against DLC coated counterfaces Fulltext Access 12 Pages 2006
On the SEM features of glass-polyester composite system subjected to dry sliding wear Fulltext Access 12 Pages 2006
Mechanical behaviour of iron oxide scale: Experimental and numerical study Fulltext Access 12 Pages 2006
Grey target theory based equipment condition monitoring and wear mode recognition Fulltext Access 12 Pages 2006
On the elastic contact of rough surfaces: Numerical experiments and comparisons with recent theories Fulltext Access 12 Pages 2006
Analytic and FE based estimations of the coefficient of friction of composite surfaces Fulltext Access 12 Pages 2006
An investigation of the grinding wheel wear with the use of root-mean-square value of acoustic emission Fulltext Access 12 Pages 2006
Experimental study of mismatch and shading effects in the I–V characteristic of a photovoltaic module Fulltext Access 12 Pages 2006
Effect of the precursor solution concentration on the NiO thin film properties deposited by spray pyrolysis Fulltext Access 12 Pages 2006
Doubled layered ITO/SnO2 conducting glass for substrate of dye-sensitized solar cells Fulltext Access 12 Pages 2006
A new 2D asperity model with interaction for studying the contact of multiscale rough random profiles Fulltext Access 12 Pages 2006
On the use of Ga–In eutectic and halogen light source for testing P3HT–PCBM organic solar cells Fulltext Access 12 Pages 2006
Investigation of rapid thermal annealing on Cu(In,Ga)Se2 films and solar cells Fulltext Access 12 Pages 2006
Improved efficiency of dye sensitized solar cells by treatment of the dyed titania electrode with alkyl(trialkoxy)silanes Fulltext Access 12 Pages 2006
Structure–infrared optical property-correlations of polar ethylene copolymer films for solar applications Fulltext Access 12 Pages 2006
A glass frit-sealed dye solar cell module with integrated series connections Fulltext Access 12 Pages 2006
Improved cyclability by tungsten addition in electrochromic NiO thin films Fulltext Access 12 Pages 2006
Photoelectrochemical solar energy conversion based on blend of poly(3-hexylthiophene) and fullerene Fulltext Access 12 Pages 2006
Synthesis and structural characterization of molybdenum sulfide tubulenes Fulltext Access 12 Pages 2006
A tribological characterization of the “damage mechanism” of low rail corrugation on sharp curved track Fulltext Access 12 Pages 2006
Effects of preparation conditions on the microstructure of porous microcapsule membranes with straight open pores Fulltext Access 12 Pages 2006
A model for evaporative casting of polymeric membranes incorporating convection due to density changes Fulltext Access 12 Pages 2006
CO2-selective polymeric membranes containing amines in crosslinked poly(vinyl alcohol) Fulltext Access 12 Pages 2006
Effect of concentrate solution pH and mineral composition of a whey protein diluate solution on membrane fouling formation during conventional electrodialysis Fulltext Access 12 Pages 2006
Modeling of dissolution-diffusion controlled drug release from planar polymeric systems with finite dissolution rate and arbitrary drug loading Fulltext Access 12 Pages 2006
Comparative study of the separation of methanol–methyl acetate mixtures by pervaporation and vapor permeation using a commercial membrane Fulltext Access 12 Pages 2006
Enzyme capturing and concentration with mixed matrix membrane adsorbers Fulltext Access 12 Pages 2006
Properties of protein adsorption onto pore surface during microfiltration: Effects of solution environment and membrane hydrophobicity Fulltext Access 12 Pages 2006
Efficiency enhancement of solar cells by luminescent up-conversion of sunlight Fulltext Access 12 Pages 2006
Forces prediction during material deformation in abrasive flow machining Fulltext Access 12 Pages 2006
A preliminary analysis on tool wear rate of polishing process: adhesion effects Fulltext Access 12 Pages 2006
The influence of strain hardening of polymers on the piling-up phenomenon in scratch tests: Experiments and numerical modelling Fulltext Access 12 Pages 2006
Comparing texture characterization parameters on their ability to differentiate ground polyethylene ski bases Fulltext Access 12 Pages 2006
Erosion–corrosion interactions and their effect on marine and offshore materials Fulltext Access 12 Pages 2006
A mathematical model to predict railway wheel profile evolution due to wear Fulltext Access 12 Pages 2006
Finite element simulation of the wear of polyoxymethylene in pin-on-disc configuration Fulltext Access 12 Pages 2006
Erosion mechanisms of nodular and gray cast irons at different impact angles Fulltext Access 12 Pages 2006