Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methods Fulltext Access 16 Pages 2005
On the relationships between the geometric processing parameters of APS and the Al2O3-TiO2 deposit shapes Fulltext Access 16 Pages 2005
Fundamental understanding and modeling of reactive sputtering processes Fulltext Access 16 Pages 2005
Determination of inverse electric field strength of Ta218O5 film produced in biological electrolytes using 18O(p, α)15N nuclear reaction analysis Fulltext Access 16 Pages 2005
Investigation of artefact sources in synchrotron microtomography via virtual X-ray imaging Fulltext Access 16 Pages 2005
Complex multimaterial insulating frames for windows with evacuated glazing Fulltext Access 17 Pages 2005
Solid polymer electrolyte membranes for fuel cell applications-a review Fulltext Access 17 Pages 2005
On the use of femtosecond laser ablation to facilitate spectroscopic depth profiling of heterogeneous polymeric coatings Fulltext Access 17 Pages 2005
Polyfluoroaromatic compounds with a NCClR group-a reactive type of polyfluoroarene Fulltext Access 17 Pages 2005
Kinetic Monte Carlo simulations of CVD diamond growth-Interlay among growth, etching, and migration Fulltext Access 17 Pages 2005
Fretting behaviour of glass-fibre-reinforced polypropylene composite against 2024 Al alloy Fulltext Access 17 Pages 2005
Soluble organic supports for the non-covalent immobilization of homogeneous catalysts; modular approaches towards sustainable catalysts Fulltext Access 17 Pages 2005
The influence of surface treatments on cathode formation and stability in polymer light emitting diodes Fulltext Access 17 Pages 2005
Assessing the effects of shear, compression, and peel on the cathodic degradation of elastomer-to-metal adhesive bonds Fulltext Access 17 Pages 2005
Theoretical and experimental research into optimal edge taper of bonded repair patches subject to fatigue loadings Fulltext Access 17 Pages 2005
Vapor-induced phase separation-effect of the humid air exposure step on membrane morphology Fulltext Access 17 Pages 2005
Liquid crystalline elastomers based on diglycidyl terminated rigid monomers and aliphatic acids. Part 1. Synthesis and characterization Fulltext Access 17 Pages 2005
A model for composites containing three-dimensional ellipsoidal inclusions Fulltext Access 17 Pages 2005
The position of a scanner and its influence on the beam spot size in a nuclear microprobe Fulltext Access 17 Pages 2005
Nanocomposites from poly(ethylene-co-methacrylic acid) ionomers: effect of surfactant structure on morphology and properties Fulltext Access 17 Pages 2005
Intercalation and exfoliation relationships in melt-processed poly(styrene-co-acrylonitrile)/montmorillonite nanocomposites Fulltext Access 17 Pages 2005
Nitrogen depletion of indium nitride films during Elastic Recoil Detection analysis Fulltext Access 17 Pages 2005
Dielectric properties of nylon 6/clay nanocomposites from on-line process monitoring and off-line measurements Fulltext Access 17 Pages 2005
Calculation and analysis of 63,65,natCu(p,x) reaction cross sections in the Ep ⩽ 250 MeV energy range Fulltext Access 17 Pages 2005
The structure of crystallisable copolymers of l-lactide, ε-caprolactone and glycolide Fulltext Access 18 Pages 2005
Test standards for thermosyphon-type solar domestic hot water system: review and experimental evaluation Fulltext Access 18 Pages 2005
Status of vacuum arc ion source development for injection of high current uranium ion beams into the GSI accelerator facility Fulltext Access 18 Pages 2005
Ion and electron track-structure and its effects in silicon: model and calculations Fulltext Access 18 Pages 2005
Electron and neutron scattering from polymer films at high momentum transfer Fulltext Access 18 Pages 2005
Effect of stabilizer on structural, optical and electrochemical properties of sol-gel derived spin coated TiO2 films Fulltext Access 18 Pages 2005
Lifetimes of organic photovoltaics: photochemistry, atmosphere effects and barrier layers in ITO-MEHPPV:PCBM-aluminium devices Fulltext Access 18 Pages 2005
Tailored microstructure of EB-PVD 8YSZ thermal barrier coatings with low thermal conductivity and high thermal reflectivity for turbine applications Fulltext Access 18 Pages 2005
Applying key concepts from nature: transition state stabilization, pre-concentration and cooperativity effects in dendritic biomimetics Fulltext Access 18 Pages 2005
Ion-, photoelectron- and laser-assisted analytical investigation of nano-structured mixed HfO2-SiO2 and ZrO2-SiO2 thin films Fulltext Access 18 Pages 2005
Macromolecular engineering: From rational design through precise macromolecular synthesis and processing to targeted macroscopic material properties Fulltext Access 18 Pages 2005
Filler toughening of plastics. Part 1-The effect of surface interactions on physico-mechanical properties and rheological behaviour of ultrafine CaCO3/HDPE nanocomposites Fulltext Access 18 Pages 2005
Optical multilayer post growth instabilities: Analyses of Gd2O3/SiO2 system in combination with scanning probe force spectroscopy Fulltext Access 18 Pages 2005
Highly-branched off-stoichiometric functional polymers as polymer networks precursors Fulltext Access 18 Pages 2005
Toughness of syndiotactic polystyrene/epoxy polymer blends: microstructure and toughening mechanisms Fulltext Access 18 Pages 2005
SEC-MALS method for the determination of long-chain branching and long-chain branching distribution in polyethylene Fulltext Access 18 Pages 2005
Quantification issues in the identification of nanoscale regions of homopolymers using modulus measurement via AFM nanoindentation Fulltext Access 19 Pages 2005
Discomfort glare assessment and prevention for daylight applications in office environments Fulltext Access 19 Pages 2005
Does the length of the short chain branch affect the mechanical properties of linear low density polyethylenes? An investigation based on films of copolymers of ethylene/1-butene, ethylene/1-hexene and ethylene/1-octene synthesized by a single site metall Fulltext Access 19 Pages 2005
An apparatus for measuring the energy and angular distribution of secondary electrons emitted from water vapor by fast heavy-ion impact Fulltext Access 19 Pages 2005
Radiation grafted poly(ethylene terephthalate)-graft-polystyrene pervaporation membranes for organic/organic separation Fulltext Access 19 Pages 2005
On the investigation of 7075 aluminum alloy welding using concentrated solar energy Fulltext Access 19 Pages 2005
Permeation of gases in polymers: parameter identification and nonlinear regression analysis Fulltext Access 19 Pages 2005
Simultaneous high- and low-angle particle impact during wear of metering blades used in paper coating Fulltext Access 19 Pages 2005
Characterization of cascade arc assisted CVD diamond-coating technology: Part II. Coating properties and applications Fulltext Access 19 Pages 2005
Characterization of cascade arc assisted CVD diamond coating technology Fulltext Access 19 Pages 2005
Rolling contact fatigue of post-treated WC-NiCrBSi thermal spray coatings Fulltext Access 19 Pages 2005
Sol-gel derived nanocrystalline CeO2-TiO2 coatings for electrochromic windows Fulltext Access 19 Pages 2005
Enthalpic and entropic origins of nucleation barriers during polymer crystallization: the Hoffman-Lauritzen theory and beyond Fulltext Access 20 Pages 2005
Rheological characterization of polystyrene-clay nanocomposites to compare the degree of exfoliation and dispersion Fulltext Access 20 Pages 2005
Solution and solid-state polymerizations of substituted p-quinodimethanes and p-quinone methides Fulltext Access 20 Pages 2005
Microstructure and mechanical properties of microcellular injection molded polyamide-6 nanocomposites Fulltext Access 20 Pages 2005
Reactive processing of polymers: effect of in situ compatibilisation on characteristics of blends of polyethylene terephthalate and ethylene-propylene rubber Fulltext Access 20 Pages 2005
Diffusion of radiation transmitted through dry and condensate covered transmitting materials Fulltext Access 20 Pages 2005
Reaction rate estimation of controlled-release antifouling paint binders: Rosin-based systems Fulltext Access 20 Pages 2005
Analytical characterization of cadmium cyanamide in CdS thin films and bulk precipitates produced from CBD process in pilot plant Fulltext Access 21 Pages 2005
Regeneration of mixed solvent by electrodialysis: selective removal of chloride and sulfate Fulltext Access 21 Pages 2005
Modeling and experimental study of birefringence in injection molding of semicrystalline polymers Fulltext Access 21 Pages 2005
From Life Cycle Assessment to Sustainable Production: Status and Perspectives Fulltext Access 21 Pages 2005
Simulation model for sizing of stand-alone solar PV system with interconnected array Fulltext Access 21 Pages 2005
CdTe contacts for CdTe/CdS solar cells: effect of Cu thickness, surface preparation and recontacting on device performance and stability Fulltext Access 21 Pages 2005
A pore diffusion transport model for forecasting the performance of membrane processes Fulltext Access 22 Pages 2005
Optimal strategy to model the electrodialytic recovery of a strong electrolyte Fulltext Access 22 Pages 2005
Analysis of dual-mode model parameters for gas sorption in glassy polymers Fulltext Access 22 Pages 2005
High solids content emulsion polymerisation without intermediate seeds. Part I. Concentrated monomodal latices Fulltext Access 22 Pages 2005