Electron beam nanolithography in AZnLOF 2020

We present a lithography process using electron beam lithography with an optical resist AZnLOF 2020 for pattern transfer. High-resolution 100 keV electron beam lithography in 400 nm layers of negative resist AZnLOF 2020 diluted 10:4 with PMGEA is realized. After the electron beam lithography process, the resist is used as a mask for reactive ion etching. We performed the transfer of patterns by RIE etching of the substrate allowing a final resolution of 100 nm. We demonstrate the patterning in an insulating layer, thus simplifying the fabrication process of various multilayer devices; proximity correction has been applied to improve pattern quality and also to obtain lines width according to their spacing. This negative resist is removed by wet etching or dry etching, could allow combining pattern for smallest size down to 100 nm by EBL techniques and for larger sizes by traditional lithography using photomask.