X-ray metrology for high-k atomic layer deposited HfxZr1−xO2 films

Hafnium-based dielectrics are the most promising material for SiO2 replacement in future nodes of CMOS technology. While devices that utilize HfO2 gate dielectrics suffer from lower carrier mobility and degraded reliability, our group has recently reported improved device characteristics with a modified HfxZr1−xO2 [R.I. Hegde, D.H. Triyoso, P.J. Tobin, S. Kalpat, M.E. Ramon, H.-H. Tseng, J.K. Schaeffer, E. Luckowski, W.J. Taylor, C.C. Capasso, D.C. Gilmer, M. Moosa, A. Haggag, M. Raymond, D. Roan, J. Nguyen, L.B. La, E. Hebert, R. Cotton, X.-D. Wang, S. Zollner, R. Gregory, D. Werho, R.S. Rai, L. Fonseca, M. Stoker, C. Tracy, B.W. Chan, Y.H. Chiu, B.E. White, Jr., in: Technical Digest - International Electron Devices Meet, vol. 39, 2005, D.H. Triyoso, R.I. Hegde, J.K. Schaeffer, D. Roan, P.J. Tobin, S.B. Samavedam, B.E. White, Jr., R. Gregory, X.-D. Wang, Appl. Phys. Lett. 88 (2006) 222901]. These results have lead to evaluation of X-ray reflectivity (XRR) for monitoring high-k film thickness and control of Zr addition to HfO2 using measured film density. In addition, a combination of XRR and spectroscopic ellipsometry (SE) is shown to be a fast and non-intrusive method to monitor thickness of interfacial layer between high-k and the Si substrate.