Article ID Journal Published Year Pages File Type
543563 Microelectronic Engineering 2008 5 Pages PDF
Abstract

Electron irradiation of the Au/n-Si/Al Schottky diode was performed by using 6 MeV electrons and 3 × 1012 e−/cm2 fluency. The current–voltage (I–V), capacitance–voltage (C–V) and capacitance–frequency (C–f) characteristics of the unirradiated and irradiated Schottky diode were analyzed. It was seen that the values of the barrier height, the series resistance, and the ideality factor increased after electron irradiation. However, there was a decrease in the leakage current with electron irradiation. The increase in the barrier height and in the series resistance values was attributed to the dopant deactivation in the near-interface region. The interface states, Nss, have been decreased significantly after electron irradiation. This was attributed to the decrease in recombination centre and the existence of an interfacial layer. A decrease in the capacitance was observed after electron irradiation. This was attributed to decrease in the net ionized dopant concentration with electron irradiation.

Related Topics
Physical Sciences and Engineering Computer Science Hardware and Architecture
Authors
, , , ,